ASUS ZENWATCH 2 WI502Q (02) PDF Document

The ASUS ZENWATCH 2 WI502Q has several key components:

1. Touch screen display panel: Use the touch screen to operate your watch using gestures.

2. Loop: Use the loop to tuck away the excess strap.

3. Strap: The strap allows you to wear the watch on your wrist. The strap and buckle/clasp vary by model.

4. Microphone: The built-in microphone allows you to operate the watch using voice commands.

5. Ventilation hole: This is available on select models and is for ventilation only. Do not insert foreign objects into it.

6. Spring bar: Press the pin on the spring bar to remove the current strap.

7. Charging connectors: Align these with the charging cradle to charge the battery.

8. Power and reset button: Press this button to power the watch on or off, or to reset it to its factory settings.

Your ASUS ZENWATCH 2 WI502Q is compatible with watch straps that have a standard 22 mm or 18 mm spring bar pin.

1. Press the pin on your current strap to detach it from the watch case.

2. Gently pull out the current strap. Refer to your new wrist band’s instructions to attach it.

1. Connect the charging cable to the charging connectors on the back of the ASUS ZENWATCH 2 WI502Q. The cable is designed to connect in only one orientation.

2. Connect the other end of the charging cable to your power adapter, then connect the power adapter to a nearby power outlet.

Note: If the charging connectors contain sweat, dirt, or other stains, clean them with a dry, nonabrasive, lint-free cloth before charging.

To power on:

Press and hold the power and reset button for three (3) seconds.

To power off:

1. Press and hold the power and reset button to launch the app list.

2. Swipe upward and tap Settings.

3. Swipe upward and tap Power off.

4. Tap the check mark to confirm.

Resetting your ASUS ZENWATCH 2 WI502Q restores it to its factory settings. After resetting, you will need to pair it again with your phone.

1. Press and hold the power and reset button to launch the app list.

2. Swipe upward and tap Settings.

3. Swipe upward and tap Factory reset, then tap the check mark to confirm.

Before pairing with a new phone, you must first reset your ASUS ZENWATCH 2 WI502Q to its factory settings.

1. On your watch, press and hold the power button to open the app list.

2. Swipe up and tap Settings.

3. Swipe up and tap Factory reset, then tap the check mark.

4. The next time your watch powers on, it will display “Install Android wear on your phone.”

5. Follow the on-screen instructions for first-time pairing with your new phone.

1. Power on your ASUS ZENWATCH 2 WI502Q.

2. Enable Bluetooth on your phone and place it near the watch.

3. Launch the Android Wear app on your phone, tap the options icon, then tap Pair with a new watch.

4. Check the model name displayed on your watch screen, then select the same model name on your phone.

5. Ensure the passkey on your phone and watch are the same, then tap Pair on your phone.

1. Press and hold the power and reset button to launch the app list.

2. Swipe upward and tap Settings.

3. Swipe upward and tap Restart, then tap the check mark to confirm.

First, ensure you have installed the Android Wear app on a compatible phone (Android 4.3+ or iOS 8.2+).

1. Turn on Bluetooth on your phone and connect to the Internet.

2. Power on your ASUS ZENWATCH 2 WI502Q and swipe left on the welcome screen. It is recommended to have the watch connected to a power source.

3. Select a language for your watch that is similar to your phone’s language for voice actions to work correctly.

4. Swipe left on the “Prepare your phone” screen.

5. Swipe left on the “Install Android Wear” screen.

6. Your watch will display its model name (e.g., ASUS ZenWatch CFBF). Open the Android Wear app on your phone and select the same model name from the list.

7. A passkey will appear on both your phone and your watch. If they match, tap Pair on your phone to complete the process.

Waking the Screen:

Tap the display panel or tilt your wrist toward you.

Dimming the Screen:

Press your palm on the watch face to dim the display.

Navigating Cards (Notifications and Information):

• Swipe up: Go to the next card.

• Swipe down: Go back to the previous card.

• Swipe left: See more information or actions for the current card.

• Swipe right: Dismiss the current card or go back to the previous action.

Accessing Quick Settings:

From the watch face, swipe down to access notification settings (None, Priority, All) and view the battery percentage.

1. From the main watch face, tap and hold the screen for two seconds to launch the watch face options.

2. Swipe left or right to browse through the available watch faces. Tap on the one you want to select it.

You can also use the ASUS ZenWatch Manager app on your phone to create and customize your own watch faces.

To use voice actions, wake your ASUS ZENWATCH 2 WI502Q and say, “OK Google,” followed by a voice command.

Here are some available commands:

• Remind me: Create reminders that sync with your Google account.

• Show me my steps: Track your daily number of steps.

• Send a text: Send a text message to a contact saved on your phone.

• Email: Create or read emails received from your paired phone.

• Agenda: View events scheduled on your phone’s calendar.

• Navigate: Locate specific places and destinations.

• Set a timer: Set a countdown timer.

• Start stopwatch: Enable the stopwatch feature.

• Set an alarm: Set an alarm.

• Settings: Configure display, connectivity, and device settings.

• Start: Access the bundled apps you can use with your watch.

You can launch apps using gestures or your voice.

Using Gestures:

1. Tap on the watch face or wake up the screen, then swipe left.

2. Swipe up or down to view the app list, then tap the app you want to launch.

3. From the app list, you can swipe left or right to switch between the app list, contacts, and voice action screen.

Using Voice:

Wake your ASUS ZENWATCH 2 WI502Q, say “OK Google,” then say “Start” followed by the name of the app you would like to launch.

The ASUS ZenWatch Manager app contains various handy tools. You can access them by tapping Tools on the app’s home screen. Features include:

General:

• Face settings: Manage settings for your watch face.

FoneHelper:

• Remote call control: Control calls remotely with your watch.

• Forgot phone warning: Get an alert when your phone is too far away.

• Cover to mute (for Zenfone only): Cover your watch to automatically mute your phone ringtone.

• Find my watch: Make your watch vibrate to help you find it.

• Unlock my phone: Unlock your phone without needing to enter PIN codes.

Others:

• Flashlight: Activate the flashlight feature on your watch using your phone.

• SOS: Select contacts to automatically send an emergency message to when you use the SOS app on your watch.

First Time Setup:

1. From your paired phone, launch the Wellness app.

2. Read through the setup screens and tap the arrow icon to proceed.

3. Complete the form on the “Setup your profile” screen (name, gender, age, etc.) and tap the arrow icon to proceed.

4. Read the Terms of Use, select “I agree to Terms of Use,” and tap the check icon to finish.

To Set Activity Goals:

1. Launch the ASUS Wellness app on your phone and tap the settings icon.

2. Select Activity goal.

3. On the Activity goal screen, input a number in the box or move the slider to set your targeted daily number of steps.

You can use the ASUS Remote Camera app, which allows your ASUS ZENWATCH 2 WI502Q to act as a remote controller for your paired phone’s camera. After downloading the app on your phone, launch it to begin.

On your watch, the Remote Camera screen will have the following controls:

• Customize settings: Tap the settings icon to adjust camera options.

• Zoom: Use the slider to zoom in or out.

• Timer: Tap the timer button to turn the self-timer on or off.

• Shutter: Tap the center camera button to take photos or start/stop recording videos.

• Toggle Mode: Tap the icon to switch between camera and video functions.

General Safety Precautions:

• Your watch is water-resistant, not waterproof. Keep it dry and away from liquids.

• Ensure the watch is dry before using it with app features.

• Do not attempt to short-circuit, disassemble, or reassemble the battery.

• Discontinue use if leakage is found or if you experience an allergic reaction to metal or leather components.

• The watch and charging cradle must be recycled or disposed of properly.

• Keep small components away from children.

• Only use the watch in ambient temperatures between 5°C and 40°C.

Battery Precautions:

• The battery may present a risk of fire or chemical burn if removed or disassembled.

• There is a risk of explosion if the battery is replaced by an incorrect type.

• Do not dispose of the battery in fire.

• The battery and its components must be recycled or disposed of properly.