ASPIRE AVATA (01) PDF Document

We recommend the exclusive use of Aspire original charger, battery, components, and accessories indicated on the product page and leaflet. Use of chargers, batteries, components, and/or accessories not specifically produced for this device may lead to malfunction and/or damage to the product and to the cancellation of the warranty.

To reduce the risk of fire, shock, or damage to your ASPIRE AVATA, keep the product and its accessories away from overheated or excessively humid conditions (-5° C / 50° C).

Your device can be damaged if dropped, burned, punctured, crushed, or if it comes in contact with liquid. If you suspect damage to your device or its battery, discontinue use of your device, as it may cause overheating or injury.

To avoid misfiring, always ensure you either lock or switch off your ASPIRE AVATA when it is not in use, especially when carrying it in your pocket, bag, or purse.

In order not to damage the coil or burn the cotton, do not inhale an empty pod. Let the pod/tank stand for 5 minutes after filling so the cotton can be saturated with e-liquid before use.

The ASPIRE AVATA uses a built-in battery. The following are general safety guidelines for handling vape devices:

• Do not use non-rechargeable batteries.

• Do not use damaged batteries or batteries with a torn or damaged wrapper.

• Disconnect the battery from the charger when fully recharged.

• Do not use your vape device while charging.

Do not discard this product and battery in the environment. Only dispose of the product components at dedicated collection/disposal points.

• 1* Avata device

• 1* Avata Pod 0.6Ω (15.0 mL, preinstalled)

• 1* Type-C Cable

• 1* User Manual

The main components are:

• Mouthpiece

• 10 mL Storage Tank

• 5 mL Pod

• Non-replaceable Coil

• E-liquid Valve

• Button

• Screen

• Airflow Slider

• LED Indicator

• Type-C Charging Port

• Size: 94.8 * 44.5 * 23 mm

• Pod Capacity: 15.0 mL

• E-liquid Filling: Easy bottom fill

• Coil: 0.6Ω / 0.4Ω meshed coil, non-replaceable

• Battery Capacity: Built-in 1100 mAh

• Activation: Auto-draw

• Charging Port: Type-C

• Max Charge Current: 1A

• Wattage: Adjustable “ECO, NOR, MAX” 3 wattage levels

1. Pull to remove the pod.

2. Open the e-liquid valve.

3. Fill the bottom silicone seal and add e-liquid.

4. Plug back the silicone seal firmly.

5. Close the e-liquid valve.

6. Place the pod back.

To prevent dry hits during use, manually open the e-liquid valve once the 5 ml pod’s e-liquid reaches the minimum level. This action initiates the transfer of e-liquid from the 10 ml storage tank to the 5 ml pod. This is required to maintain continuous operation.

Remember to clean the condensation between the pod and the device.

Quickly press the fire button 5 times; the red LED indicator performs a marquee cycle once.

Quickly press the fire button 5 times; the red LED indicator performs a marquee cycle once.

The white LED indicator performs a marquee cycle once.

The device will be locked when the vaping time is over 7 seconds, and it is not allowed to plug out/in the pod once to unlock the device.

To adjust the wattage levels, quickly press the button 3 times.

• ECO level: The LED indicator will flash green twice.

• NOR level: The LED indicator will flash blue twice.

• MAX level: The LED indicator will flash purple twice.

If you vape for over 6 seconds, the screen will flash “7S (7s)” 10 times with the LED indicator flashing purple 10 times.

The screen will flash “188”, “+” icon and “%” icon 3 times, perfectly synchronized with the purple LED indicator’s three flashes.

The screen will flash “+” icon and “00%” battery level 10 times.

The device will stop charging and vaping is not allowed.

The screen and the green LED indicator will be on for 10s and then shut off.

Attach the Type-C cable: The screen will display the current battery level while the “+” icon flashes and the LED indicator cycles in a marquee pattern.

Fully charged: The screen and the green LED indicator will be on for 10s and then shut off.

If the charging voltage is over 6.5V or lower than 4.0V: The device will stop charging and the screen will shut off.

Unplug the Type-C cable: The screen will shut off.

Before using nicotine-containing e-liquid, the user should read the following information carefully.

If used with nicotine-containing liquid, it should be noted that nicotine is a highly addictive substance and, therefore, is not recommended for use by non-smokers. It may produce toxic effects if consumed orally, especially in infants or children. Do not use if you are allergic to nicotine or any of the other ingredients contained within the e-liquid (see manufacturer’s label for full details).

Nicotine-containing e-liquid is not recommended for:

• Non-smokers

• Young people under the legal age

• Pregnant or breast-feeding women; as nicotine is known to cross the placenta and to be excreted in breast milk

Do not use the product if you have any of the following conditions:

• Those experiencing general ill health; such as heart disease, stomach, and duodenal ulcers, liver or kidney problems, long term throat disease, or difficulty breathing due to bronchitis, emphysema, or asthma.

• Those who have an overactive thyroid gland or have a pheochromocytoma (a tumor of the adrenal gland that can affect high blood pressure).

• Those who have diabetes; nicotine may affect your blood sugar levels.

You should not use the product if you are taking the following medication:

• Theophylline (to treat breathing problems)

• Ropinirole (to treat restless leg syndrome)

• Clozapine (to treat schizophrenia)

If you inhale too much nicotine or use the product too much you may experience one or more of the following effects:

• Feeling faint

• Nausea (feeling sick)

• Headache

• Coughing

• Irritation of the mouth or throat

• Dizziness

• Stomach discomfort

• Hiccups

• Nasal congestion

• Vomiting

• Arrhythmias in the chest

• Abnormal heartbeats