Free English ARUBA AP-130 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD ARUBA AP-130 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How do I attach the wall mount adapter for my ARUBA AP-130 to a wall?
1. Install any necessary wall anchors. Wall anchors are not included in this kit.
2. Align the screw holes in the mounting bracket with the previously installed anchors or demarcated screw points.
3. Insert the screws to secure the mounting bracket. Screws are not included in this kit.
How do I attach the ARUBA AP-130 access point to the secured mounting adapter?
1. Attach any necessary cables and/or antennas to the AP.
2. Align the AP with the mounting adapter, placing the AP so that its mounting tabs are at an angle of approximately 30 degrees to the adapter.
3. Pushing toward the wall, rotate the AP clockwise until it clicks into place.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD ARUBA AP-130 (01) PDF DOCUMENT