Free English ARLEC WLED2030 (01) PDF Document. Free English ARLEC WLED2030 (01) PDF User Guide. Free English ARLEC WLED2030 (01) PDF User Manual. Free English ARLEC WLED2030 (01) PDF Owner Guide. Free English ARLEC WLED2030 (01) PDF Owner Manual. Free English ARLEC WLED2030 (01) PDF Reference Guide. Free English ARLEC WLED2030 (01) PDF Instruction Guide. Free English ARLEC WLED2030 (01) PDF Reference Manual. Free English ARLEC WLED2030 (01) PDF Instruction Manual. Free English ARLEC WLED2030 (01) PDF Operating Instructions.
CLICK HERE TO DOWNLOAD ARLEC WLED2030 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What is the intended use of the ARLEC WLED2030 Portable Worklight?
The ARLEC WLED2030 is suitable for indoor and temporary outdoor use. It is ideal for contractor, tradesman and DIY handyman applications. Please note that when used outdoors the supply plug and socket-outlet must be suitably protected against water ingress.
How do I assemble the ARLEC WLED2030 Portable Worklight?
Assemble the ARLEC WLED2030 worklight as shown below:
1. Remove the fixing knob with integral screw from the base stand, then slide the base stand into the opening adjacent to the support bracket.
2. Insert fixing knob with integral screw into the captive nut inside the base stand, then tighten firmly.
How do I adjust the tilt of the ARLEC WLED2030 lamp head?
To set the tilt of the lamp head, simply loosen the fixing knob, push the head forward or backward to the desired position while holding the base stand, then tighten the fixing knob.
Note: Do not remove the support bracket from the lamp body. While adjusting the lamp head, avoid pinching or bending of the supply cord.
How do I operate the ARLEC WLED2030 worklight?
1. Adjust the tilt of the lamp head by pushing the top of the head forward or backward to the desired position while holding the stand firmly by the handle.
2. Plug the worklight into a power point.
3. Turn on the power to the worklight.
What are the important safety notes and care instructions for the ARLEC WLED2030?
Please follow these important notes when using the ARLEC WLED2030:
• Do not remove the support bracket from the lamp body.
• Do not pinch or sharply bend the supply cord while adjusting the lamp head.
• Do not open the worklight body; there are no user-serviceable parts inside.
• Do not immerse in water or any other liquid.
• Do not use abrasive cleaners; clean with a damp cloth.
• If the supplied flexible cord is damaged, it must only be replaced by a service agent or similarly qualified person in order to avoid a hazard.
What are the features of the ARLEC WLED2030 High Output LED Module Array?
• 20W LED array
• Provides high intensity even light distribution with a 70° even light beam.
• Suitable for indoor/outdoor lighting for contractor, tradesman, and DIY applications.
• Cool to touch durable polycarbonate/aluminium housing.
• Wide angle coverage for large work areas.
• Weatherproof IP44 rating.
What are the technical specifications for the ARLEC WLED2030?
| INPUT VOLTAGE | 220-240Vac 50Hz |
| WATTAGE | 20W |
| IP CLASSIFICATION | IP44 |
| LED | Super bright module • 300mA • 29-35V • 20W • 6500K (non-replaceable type) |
| PROTECTIVE SHIELD | Glass Lens 172 x 110 x 3.85mm thick |
| ENCLOSURE | polycarbonate/aluminium housing |
CLICK HERE TO DOWNLOAD ARLEC WLED2030 (01) PDF DOCUMENT