Free English ARLEC UC0074 (01) PDF Document. Free English ARLEC UC0074 (01) PDF User Guide. Free English ARLEC UC0074 (01) PDF User Manual. Free English ARLEC UC0074 (01) PDF Owner Guide. Free English ARLEC UC0074 (01) PDF Owner Manual. Free English ARLEC UC0074 (01) PDF Reference Guide. Free English ARLEC UC0074 (01) PDF Instruction Guide. Free English ARLEC UC0074 (01) PDF Reference Manual. Free English ARLEC UC0074 (01) PDF Instruction Manual. Free English ARLEC UC0074 (01) PDF Operating Instructions.
CLICK HERE TO DOWNLOAD ARLEC UC0074 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
Where should I install the ARLEC UC0074 Slim Line Bar Light?
You should decide on a suitable location to mount the ARLEC UC0074 light fitting. This product can be either wall mounted or fixed to the underside of a cabinet. Do not mount the fitting in a position where it may be subjected to excessive heat or steam, for example, above a cooktop.
The brackets must be attached to the mounting surface using the provided screws. They need to be secured firmly in position and be capable of permanently supporting the weight of the light fitting.
How do I install the ARLEC UC0074 using the standard mounting method?
To install your ARLEC UC0074 with the standard brackets, please follow these steps:
1. Attach a single bracket to the mounting surface using the screw provided.
2. Slide the light fitting completely over the mounting bracket until the movement stops.
3. Insert the second mounting bracket into the slot at the other end of the light fitting, then fasten it in position with the screw provided.
4. Slide the light fitting back over the second bracket to conceal the mounting method.
How do I install the ARLEC UC0074 using the right-angle mounting method?
To install your ARLEC UC0074 with the right-angle brackets, please follow these steps:
1. Slide the brackets into the slots at each end of the light fitting base.
2. Fasten the brackets into position with the screw provided.
What are the safety instructions for the ARLEC UC0074?
Please adhere to the following safety information when using the ARLEC UC0074:
• This product is designed for indoor use only.
• There are no user-serviceable parts. Repairs, including the replacement of the supply flexible cord, must only be performed by a suitably qualified person.
• When linking lights together, do not exceed the 250W maximum load. The modular light fittings can be linked together to draw a maximum total load of 250W (1A).
• The appliance outlet cover must always remain in place when the outlet is not used.
How should I clean and care for my ARLEC UC0074?
For the care and cleaning of your ARLEC UC0074, please follow these instructions:
• Always switch off the power before cleaning.
• Clean the exterior with a damp cloth, then wipe dry.
• Do not use abrasive cleansers or solvents.
What are the specifications for the ARLEC UC0074?
The specifications for the ARLEC UC0074 are as follows:
Supply Voltage: 230-240V~
Frequency: 50Hz
Input: 3W (UC0074)
CLICK HERE TO DOWNLOAD ARLEC UC0074 (01) PDF DOCUMENT