Free English ARIZER AIR II (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD ARIZER AIR II (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How do I get started with the ARIZER AIR II?
Ensure the battery is fully charged before first use. Press and hold the Menu Button and Plus Button simultaneously to power on the ARIZER AIR II. Adjust the temperature with the Plus and Minus Buttons. Load your botanical into the glass aroma tube and insert it into the top of the ARIZER AIR II. Wait for the ARIZER AIR II to reach your set temperature, then you can begin to draw.
How do I charge the ARIZER AIR II?
You can charge the ARIZER AIR II using the included USB charger. The battery indicator will scroll while charging and show a solid full battery when charging is complete. Alternatively, you can use an external charger for the 18650 battery.
How do I power on/off the ARIZER AIR II?
To power on the ARIZER AIR II, press and hold the Menu Button and Plus Button simultaneously until the countdown timer is complete and you hear an audible beep. To power off the ARIZER AIR II, press and hold the Menu Button and Plus Button simultaneously until the countdown timer is complete.
How do I adjust the temperature settings on the ARIZER AIR II?
Use the Plus and Minus Buttons to adjust the temperature settings on the ARIZER AIR II. Press the Plus Button to increase the temperature and the Minus Button to decrease it.
How do I change the temperature unit between Celsius and Fahrenheit on the ARIZER AIR II?
With the ARIZER AIR II powered on, press and hold the Menu Button for approximately 3 seconds to access the menu. Press the Plus or Minus Button to navigate to the “°C/°F” setting. Press the Menu Button to select it, then use the Plus or Minus Button to choose between Celsius or Fahrenheit. Press the Menu Button again to confirm your selection, or hold the Menu Button to exit the menu.
How do I adjust the auto-shutoff timer on the ARIZER AIR II?
With the ARIZER AIR II powered on, press and hold the Menu Button for approximately 3 seconds to access the menu. Press the Plus or Minus Button to navigate to the “TIMER” setting. Press the Menu Button to select it, then use the Plus or Minus Button to adjust the auto-shutoff timer (between 5-15 minutes). Press the Menu Button again to confirm your selection, or hold the Menu Button to exit the menu.
How do I adjust the audio beep volume on the ARIZER AIR II?
With the ARIZER AIR II powered on, press and hold the Menu Button for approximately 3 seconds to access the menu. Press the Plus or Minus Button to navigate to the “VOLUME” setting. Press the Menu Button to select it, then use the Plus or Minus Button to adjust the audio beep volume (Low, Medium, High, or Off). Press the Menu Button again to confirm your selection, or hold the Menu Button to exit the menu.
How do I adjust the display brightness on the ARIZER AIR II?
With the ARIZER AIR II powered on, press and hold the Menu Button for approximately 3 seconds to access the menu. Press the Plus or Minus Button to navigate to the “BRIGHT” setting. Press the Menu Button to select it, then use the Plus or Minus Button to adjust the display brightness (Low, Medium, or High). Press the Menu Button again to confirm your selection, or hold the Menu Button to exit the menu.
How do I adjust the power-on delay on the ARIZER AIR II?
With the ARIZER AIR II powered on, press and hold the Menu Button for approximately 3 seconds to access the menu. Press the Plus or Minus Button to navigate to the “START” setting. Press the Menu Button to select it, then use the Plus or Minus Button to adjust the power-on delay (4, 6, or 8 seconds). Press the Menu Button again to confirm your selection, or hold the Menu Button to exit the menu.
How do I clean the ARIZER AIR II?
Clean the ARIZER AIR II regularly for optimum performance. The glass aroma tubes can be cleaned by soaking them in isopropyl alcohol. For the heater, power on the ARIZER AIR II and set the temperature to maximum (220°C / 428°F) for 15 minutes to burn off any residue. If further cleaning is needed, use a cotton swab with a small amount of isopropyl alcohol and wipe the inside of the heating chamber while the unit is off and cooled. Ensure the heater is completely dry before turning the ARIZER AIR II on again.
What do the ARIZER AIR II display indicators mean?
The display of the ARIZER AIR II shows several indicators:
Actual Temp: Displays the current temperature of the heater.
Set Temp: Displays the temperature you have set.
Countdown: The power-on countdown timer.
Session Timer: Displays the remaining time before auto-shutoff.
Battery Indicator: Displays the current battery charge level.
What should I do if the ARIZER AIR II is not working as expected?
If your ARIZER AIR II is not working as expected, try the following troubleshooting steps:
1. Ensure the battery is fully charged. Low battery can affect performance.
2. Power off and restart the ARIZER AIR II.
3. Check the temperature settings to ensure they are at your desired level.
4. Clean the glass aroma tubes and heating chamber to remove any residue that might be affecting airflow or heating.
5. If the problem persists, try replacing the battery with a known good one.
CLICK HERE TO DOWNLOAD ARIZER AIR II (01) PDF DOCUMENT