Free English ANKO SLR-23306 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD ANKO SLR-23306 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the Assembly Instructions for the ANKO SLR-23306?
1) To charge, insert the supplied type C plug USB cable into the back of the mirror.
2) Only charge the mirror with the supplied USB cable.
How should I perform Cleaning & Maintenance on the ANKO SLR-23306?
1) Turn the appliance off before you start cleaning it.
2) Do not immerse the appliance in water. Clean the appliance surface with a dry cloth or with a cloth moistened with water.
3) Do not use any lubricant, detergent, polishing agents, alcohol, steel wool, abrasive cleansers, chemicals or corrosive liquids on this appliance.
What are the Eco-Friendly Tips for the disposal of the ANKO SLR-23306?
This appliance has a lithium battery. Batteries contain substances harmful to our environment, please do not dispose of the appliance containing batteries with the normal household waste, instead hand it over to an official recycling point.
What troubleshooting steps should I follow if the LED Light on my ANKO SLR-23306 is not bright enough or does not turn on?
| Problem | Possible Cause | Solution |
|---|---|---|
| LED Light is not bright enough or it does not turn on | The battery is running low or is out of power | Charge the appliance as guided |
What safety warnings should I be aware of before using the ANKO SLR-23306?
- Check the appliance before you use it, do not use the appliance if it has any crack, gap or any other damage.
- Make sure the mirror is not in a place or in a position where it can reflect sunlight. Reflected sunlight can cause fire.
- Do not attempt to repair, disassemble, or modify the appliance by yourself to avoid accidents.
- The light source of this mirror is not replaceable.
- Maximum 0.5kg loading is stored.
- For indoor use only.
What cautions should I take when using the ANKO SLR-23306?
- Avoid touching the mirror with sharp objects in order to prevent scratches that might affect the mirror usage.
- This appliance has a lithium battery. Do not place or store the appliance for long periods of time in a hot or humid environment. If you do not intend to use the appliance for a long time, store the appliance after is fully charged.
- This appliance contains battery and LED lights that are non-replaceable.
- Ensure charging adapter used is compatible with a 5VDC SELV 1A, 5W rating.
What are the specifications of the ANKO SLR-23306?
- Charging Voltage / Current: 5V — / 1000mA Max. 5W
- Type of Battery: Li-polymer 3.7V 2000mAh
- Ta: 25 °C
How do I charge the ANKO SLR-23306?
If the light ray is not bright enough, this appliance needs to be charged. Please use a USB type-C cable to charge. Charging the appliance takes about 5 hours, and it can be used continuously for up to 3 hours for the most bright status. The charging indicator (at back of the mirror) will be red while the mirror is charging and will change to green, when fully charged.
How do I turn on the ANKO SLR-23306 and adjust the light brightness?
Touch the dimmable ON/OFF touch switch to turn on the light. Hold the touch switch to adjust the light brightness.
How do I change the colour of the LED light on the ANKO SLR-23306?
Sequentially short touch the switch to change the colour of the LED. The colour can be cool white, warm white and natural white.
CLICK HERE TO DOWNLOAD ANKO SLR-23306 (01) PDF DOCUMENT