ANKO EBS5-223439 (01) PDF Document

The package for the ANKO EBS5-223439 includes:

> Bluetooth® RGB Speaker

> USB A to USB C Charging Cable

> User Manual

The function overview for the ANKO EBS5-223439 is as follows:

1. Hand Strap

2. RGB Light Display

3. Power ON/OFF, Play/Pause, Answer/hang up call button

4. Switch Bluetooth Mode/TF Mode/AUX Mode button

5. RGB Light Switch Button

6. MIC (Microphone)

7. Volume Up/Next Song button

8. Volume Down/Previous Song button

9. TF Card Slot

10. USB-C Charging Port

11. Charging Indicator

12. AUX-IN Port

> Press and hold the ON/OFF button to turn the speaker on. The RGB lights will light up and the LED will flash.

> Press the button to answer or hang up a phone call.

> Short press the button to play or pause music.

Click the ‘M’ button to switch between Bluetooth Mode, TF Mode, and AUX Mode. No matter which mode you switch to, you will hear a prompt tone to indicate the mode change, followed by music if available.

> Once the speaker is powered on, it will automatically enter Bluetooth mode.

> On your media device, search for “anko43421350” in the Bluetooth menu and connect to it.

> Once the speaker is successfully paired and connected, you will hear a prompt tone.

> If the TF Mode or AUX Mode is disconnected, the speaker will automatically reconnect to the last paired Bluetooth device.

Short press the RGB light button to change the RGB light color. There are 5 different light modes. Pressing the button for the sixth time will turn off the RGB lights.

Use a 3.5mm audio cable (not included) to connect your device through the AUX IN port. You will hear a prompt tone. You can then choose music from your media device to play through the speaker.

Insert a TF card into the TF card slot. The speaker will automatically start playing music from the TF card. The speaker supports playback of WAV and MP3 audio formats, with a maximum supported card size of 64GB.

> To pair both speakers in TWS mode, power both speakers on. Then, long-press the volume up and volume down buttons simultaneously on one of the speakers.

> After the speakers have successfully paired with each other, you can search for “anko43421350” on your source device (e.g., smartphone) and connect.

> Once paired, all actions performed on one speaker are automatically applied to the other. This includes switching songs, adjusting volume, play/pause, and powering off. You can also control the volume and track selection from your source device.

Disconnect pairing:

Long press the Volume Up and Volume Down buttons at the same time on either of the speakers to disconnect them. The remaining Bluetooth-connected speaker will keep working, and the disconnected speaker will go into standby mode.

Re-connection after disconnection:

Long press the Volume Up and Volume Down buttons on the disconnected speaker to re-enter TWS pairing. It will automatically re-connect to the other speaker. Both speakers should be in Bluetooth mode for this to work.

The ANKO EBS5-223439 speaker is powered by a rechargeable Lithium battery. Use the provided USB-C cable for charging. Plug the USB-C end into the device’s charging port and the other USB-A end into a PC USB port, wall charger, or another 5V charging device. The LED indicator will display red while charging and will turn off when the battery is fully charged.

> Operating environment

Temperature: -5 °C to 45 °C

> Storage environment

Temperature: -20 °C to 60 °C