Free English ANKO EB400885 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD ANKO EB400885 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What are the parts of the ANKO EB400885 Plasma Ball USB Car Charger?
The ANKO EB400885 Plasma Ball USB Car Charger consists of the following parts:
• Plasma Ball
• USB-C Output port
• USB-A Output port
What are the technical specifications for the ANKO EB400885?
| Model | EB400885 |
| Input | DC 12-24V-2A MAX |
| Output USB-C | 5V 3.1A (15.5W MAX) |
| Output USB-A | 5V 3.1A (15.5W MAX) |
| Output USB-C + USB-A | 5V 3.1A (15.5W MAX) |
| Dimensions | 146.98 x 45 x 45mm |
How do I operate the ANKO EB400885 car charger?
To operate the ANKO EB400885 car charger, follow these steps:
Connect power: Plug the car charger into your car’s socket.
Charging: Connect one end of a charging cable to your device’s charging port and the other end to either the USB-C or USB-A port on the charger.
What safety precautions should I take when using the ANKO EB400885?
Please follow all safety instructions to avoid damage caused by improper use:
• Use this device solely for its intended purpose.
• Keep the appliance away from all hot surfaces and naked flames.
• Always put the appliance on a level, stable, clean, dry surface.
• Protect the appliance from extreme heat and cold, dust, direct sunlight, humidity, and drops or jets of water.
• Do not immerse the appliance in water or in other liquids.
• Do not open the housing under any circumstances.
• Do not introduce any objects into the interior of the housing.
• Do not hold the ball to pull or twist the charger out of the car socket, as it may lead to an air leak or damage to the ball.
• To prevent fire or electric shock, keep the device away from liquids and moisture.
• Do not operate this car charger with a damaged plug.
• This car charger is not intended for use by children. Adult supervision is always required when children are present.
• Should the device malfunction due to electrostatic discharge or a short power surge, disconnect it.
What should I do in an emergency while using the ANKO EB400885?
In case of emergency, discontinue use immediately. For example:
• If you see smoke coming from the unit.
• If the unit has a changed shape.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
CLICK HERE TO DOWNLOAD ANKO EB400885 (01) PDF DOCUMENT