ANKO 43-243-303 (01) PDF Document

The package for the ANKO 43-243-303 Smart Watch includes:

– 1 Smart watch

– 1 2-pin charging cable

To activate and charge your ANKO 43-243-303 Smart Watch, follow these steps:

1. Before initial use, ensure the power source is working normally.

2. If the watch battery is low, connect the device to the charger. The device will automatically boot up.

3. Connect the magnetic USB charging cable to the charging points on the back of the watch and plug the other end into a normal DC port (5V/1A).

To turn on or off: Press and hold the home button for 3 seconds.

To wake the screen: Press the home button once. You can also turn your wrist towards you to wake the screen if the “Light up” function is enabled in the companion app.

1. Download and install the “GloryFit” APP on your mobile phone. You can search for “GloryFit” in your app store or scan the QR code in the user manual.

2. Turn on Bluetooth in your mobile phone’s settings.

3. Open the GloryFit APP and select the option to add a device.

4. Choose your device from the list that appears. The model name will appear as “KM43243303” in the app once connected.

You can navigate the ANKO 43-243-303 Smart Watch using the following swipe gestures from the main interface:

Slide up: View SMS information. (Requires enabling SMS & App notifications in the GloryFit app).

Slide down: Access the quick settings menu to turn voice on/off, adjust brightness, find your mobile, and access other settings.

Slide right: Open the main function menu. Click an icon to enter that function. To return, slide left or press the home button.

Slide left: View a sequence of shortcut widgets: Body temperature, Body Oxygen, Status (step count, distance, calories), Heart rate, Sleeping record, and Weather.

Home Button: When in a secondary interface, press the home button to return to the previous interface.

Changing the Watch Face:

There are 5 main dials available directly on the watch. To change the dial, press and hold the touch screen on the main interface until you feel a vibration, then select your preferred dial. More dials are available to choose from within the GloryFit app after the watch is paired with your phone.

Adjusting Screen Timeout:

The screen automatically turns off after 5 seconds of being idle. To adjust this duration, you need to set the “display timeout” in the GloryFit app on your phone.

The ANKO 43-243-303 Smart Watch includes the following health and fitness functions:

Training: Start a new sport recording with 24 available sports modes.

Status: Display the daily step count, distance traveled, and calorie status.

Heart Rate: Click to start measuring your heart rate.

BP (Blood Pressure): Click to start measuring your blood pressure.

Blood Oxygen: Click to start measuring your blood oxygen level.

Sleeping: Records the quality and time of your sleep. You need to wear the watch while sleeping for this function to work.

Body Temperature: Measures your body temperature.

The ANKO 43-243-303 Smart Watch offers 24 sports modes: Outdoor Running, Cycling, Skipping, Swimming, Badminton, Table tennis, Tennis, Alpinism, Walking, Basketball, Football, Baseball, Volleyball, Cricket, Rugby, Hockey, Dancing, Spinning bike, Yoga, Sit-ups, Indoor running, Gymnastics, Boating, and Jumping Jack.

Beyond health and fitness, the ANKO 43-243-303 Smart Watch offers these functions:

Music: When connected to your phone, you can control the music player to play/pause, and skip to the last or next song.

Message: The watch can synchronize and display incoming notifications from apps like Twitter, Facebook, WhatsApp, and Instagram. The last 5 messages can be stored on the watch. This feature can be turned ON or OFF in the GloryFit app.

Weather: Displays weather information and the temperature for the current day.

More: This interface includes a Stopwatch, Timer, and Find me function.

Setting: This menu allows you to Adjust Dial, change brightness, view Info (about the device), turn the device Off, or Rest (reset) it.

The ANKO 43-243-303 Smart Watch is water-resistant with an IP67 rating, which means it is rain-proof and splash-proof, and can withstand a sweaty workout. However, you should not swim with the watch. It is also recommended to remove the watch periodically to allow your skin to dry and breathe. If the strap gets wet, you should dry it thoroughly before putting it back on.

Screen Size: 1.69 inch

Battery Capacity: 170mAh

Input: DC 5V-1A

IP rating: IP67

Please observe the following safety instructions for your ANKO 43-243-303 Smart Watch:

General Use & Battery:

– The product contains a lithium battery. Do not open the product.

– Do not expose to heat, water, moisture, or direct sunlight.

– Only charge with the charging cable supplied with the product.

– This product is not a toy. Keep it out of reach of children and pets to avoid chewing and swallowing.

Environment & Operation:

– Product operating and storage temperature is from -5 degrees Celsius to 55 degrees Celsius. Extreme temperatures can affect function.

– Avoid exposing your device to very cold or very hot temperatures (below 0 °C or above 45 °C) as this can cause deformation and reduce charging capacity and life.

– Do not allow your device to get wet, as liquids can cause serious damage. Do not handle your device with wet hands.

Maintenance & Disposal:

– Never attempt to disassemble or reassemble the device. Repairs should only be performed by qualified personnel.

– Waste electrical products should not be disposed of with household waste; please recycle where facilities exist.

Accessories & Bluetooth:

– Using accessories other than those delivered with the product can cause abnormal functionality.

– Bluetooth operates within a range of about 10m (30 feet). The distance may vary depending on obstacles.

– Microwaves emitting from a Bluetooth device may affect the operation of electronic medical devices.

No, the ANKO 43-243-303 Smart Watch is not a medical-grade device. It is a fitness tracker and general wellness device used to log, track, or trend exercise activity. The included health features (heart rate monitor, deep sleep monitor, blood oxygen test, and blood pressure test) are for informational purposes only. They should not be used to diagnose or monitor any medical conditions. Please consult with your doctor regarding any health concerns or for diagnostic purposes.