AMPEG ROCKET BASS RB-115 (02) PDF MANUAL

AMPEG ROCKET BASS RB-115 (02) PDF SUMMARY:

What is included in the box?

Rocket Bass® RB-108, RB-110, RB-112, RB-115, or RB-210 Amplifier, Power Cable, Quick Start Guide.

What is the Rocket Bass Combo?

Designed from the ground up, with Ampeg’s industry standard tone and styling in mind, the all-new Rocket Bass combos feature the legacy Ampeg preamp and tone stack circuits with the widest range of classic Ampeg tones any Ampeg combo has ever offered. The new SGT™ (Super Grit Technology) overdrive circuit gives you the warmth and grit of a monster SVT® stack, packed into a lightweight combo that you can easily carry to any practice or performance.

How can I get the most out of my new combo?

Fully read the Owner’s Manual, as well as the Important Safety Instructions included with the Rocket Bass series amp, before you begin playing.

What are the Rocket Bass Series Features?

• Superior Tone
• Legacy Ampeg preamp and tonestack circuits
• New SGT overdrive circuit
• Perfectly-matched Lavoce® custom speakers*
• Pro-Grade Flexibility
• Super lightweight construction
• Integrated DIs, effects loops, extension speaker outs*
• Aux in / headphone outs
• Iconic Styling
• Ampeg’s iconic black diamond vinyl
• Impact-resistant metal corners
• Rugged, braced enclosures

What are some features that are only available on select models?

New SGT overdrive circuit, Perfectly-matched Lavoce® custom speakers*, Integrated DIs, effects loops, extension speaker outs*

What is the function of the -15 dB INPUT?

The attenuation of this 1/4” input is suited for use with basses that have active electronics or high-output pickups. Connect here using a shielded instrument cable.

What is the function of the 0 dB INPUT?

The signal output from a passive instrument may be connected to this 1/4” input. Connect here using a shielded instrument cable.

What is the function of the SGT LED?

This LED illuminates amber when the SGT overdrive circuit is on.

What is the function of the SGT ON/OFF?

Engage this switch to activate the SGT overdrive circuit. This allows for varying amounts of tube-like grit and distortion.

What is the function of the GRIT?

Use to adjust the amount of SGT “grit.” Turn the knob clockwise for a more overdriven sound (RB-110, RB-112, RB-115, RB-210).

What is the function of the LEVEL?

Use to control the overall level of the SGT overdrive circuit. Turn the knob clockwise to increase the SGT level. (RB-110, RB-112, RB-115, RB-210).

What is the function of the VOLUME?

Use to control the amplifier’s overall output level. It affects the preamp level fed to the Speaker and Phones outputs. Use it wisely and turn down when making connections, wearing headphones, or when trying something new. This control does not affect any signal coming into to the Aux Input (14).

What is the function of the ULTRA HI?

This switch, when engaged, enhances the amount of high frequency output with 5 dB boost at 8 kHz (RB-112, RB-115, RB-210).

What is the function of the ULTRA LO?

This switch, when engaged, enhances the amount of low-end output with a 1 dB boost at 40 Hz, and a 10 dB cut at 500 Hz (RB-112, RB-115, RB-210).

What is the function of the BASS?

Use to adjust the low frequency level of the amplifier. The low frequency output is flat at the center, “0” knob position. Rotate the control counter clockwise from 0 to reduce the bass frequencies—or clockwise from 0 to increase the bass frequencies. See the following pages for Technical Specifications.

What is the function of the MIDRANGE?

Use to adjust the midrange frequency level of the amplifier. The midrange frequency level is flat at the center “0” knob position. Rotate the control counter clockwise for a “contoured” sound (more distant, less midrange output), or clockwise for a sound that really cuts through (increased midrange). See the following pages for Technical Specifications.

What is the function of the TREBLE?

Use to adjust the high frequency level of the amplifier. The high frequency level is flat at the center “0” knob position. Rotate the control counter clockwise from 0 to reduce the treble frequencies—or clockwise from 0 to increase the treble frequencies. See the following pages for Technical Specifications.

What is the function of the PHONES?

Use this 1/8" TRS stereo output to connect your headphones. The output here is a mix of the line level signals reaching the amplifier, as well as any incoming audio from the Aux Input jack (14). Speaker output is muted when Phones are connected.

What is the function of the AUX INPUT?

The analog audio output from a line level source, such as an MP3 player or other music source, can be connected to this 1/8" input.

What is the function of the ON LED?

This LED illuminates blue when the amplifier’s power is on.

What is the function of the POWER SWITCH?

Press the top of this switch to turn on the overall system power, and press the bottom of the switch to turn it off.

What is the function of the Horn On/Off Switch?

Turns the high frequency horn on/off (RB-210 only).

What is the function of the EXT SPEAKER OUTPUT?

Optionally, use this 1/4" TS output jack to connect to an 8 Ω extension speaker cabinet. The internal speaker remains active when an extension speaker is connected.

What type of cable should I use for the EXT SPEAKER OUTPUT?

Use a non-shielded speaker cable with 1/4" TS ends to make the connections. Do not use shielded instrument cables as they may overheat.

What is the function of the SGT SWITCH?

Optionally, connect a 1/4" TS footswitch to this jack for remote on/off control of the SGT circuit (RB-112, RB-115, RB-210). NOTE: A footswitch may be purchased at your local Ampeg Dealer, or directly from shop.ampeg.com.

What is the function of the EFFECTS LOOP SEND?

Use a TS (unbalanced) cable from this 1/4" output to send a line level signal to an external effects processor. The output here is affected by all controls. Use the Effects Loop Return jack to feed the returned processed signals back into the power amplifier—see item 21 (RB-112, RB-115, RB-210).

What is the function of the EFFECTS LOOP RETURN?

Use a TS (unbalanced) cable into this 1/4" input to return the processed line level output of an external effects processor. The processor could be fed by signals from the Effects Loop Send—see item 20 (RB-112, RB-115, RB-210).

What is the function of the GROUND / LIFT SWITCH?

Toggle to Lift to disable the ground connection at the Balanced DI Output jack if grounding hum or noise is present – see item 23 (RB-110, RB-112, RB-115, RB-210).

What is the function of the BALANCED DI OUT?

Connect this post-EQ, Post-SGT, mic level, balanced XLR output to the balanced input of an external mixer or recorder. In this configuration, you do not need to mic the speaker cabinet in order to add it to the main mix or to record (RB-110, RB-112, RB-115, RB-210).

What are the RB-108 Technical Specifications?

FEATURE	SPECIFICATION	VALUE
Output Power Rating		30 Watts RMS @ 4 Ω 10% THD+N
Signal-to-Noise Ratio		80 dB (20 Hz–20 kHz unweighted)
Maximum Gain @ 1 kHz Input		45 dB
Input Impedance	Normal Input:	500k Ohms
	-15dB Pad Input:	75k Ohms
Tone Controls	Bass:	+18/–20 dB @ 40 Hz
	Mid:	+14/–10 dB @ 500 Hz
	Treble:	+16/–18 dB @ 4 kHz
Speaker Specs		1 x 8" speaker, 4 Ω
Maximum Operating Range		45° C ambient temperature, 93% relative humidity, up to 2000 m altitude
Power Requirements		100–240V ~ 50-60 Hz, 45W Max
Size (H x W x D)		17 x 16.2 x 12 inches 433 x 411 x 306 mm
Weight (Approximate)		23 lbs 10.45 kg

Are the RB-108 Technical Specifications subject to change?

Yes, all specifications are subject to change.

What are the RB-110 Technical Specifications?

FEATURE	SPECIFICATION	VALUE
Output Power Rating		50 Watts RMS @ 4 Ω 10% THD+N
Signal-to-Noise Ratio		84 dB (20 Hz–20 kHz unweighted)
Maximum Gain @ 1 kHz Input		48.5 dB
Input Impedance	Normal Input:	1Meg Ohms
	-15dB Pad Input:	75k Ohms
Tone Controls	Bass:	+14/–13 dB @ 40 Hz
	Mid:	+15/–9 dB @ 500 Hz
	Treble:	+12/–20 dB @ 4 kHz
Speaker Specs		1 x 10" speaker, 4 Ω
Maximum Operating Range		45° C ambient temperature, 93% relative humidity, up to 2000 m altitude
Power Requirements		100-240V ~ 50-60 Hz, 70W Max
Size (H x W x D)		19 x 16.2 x 13 inches 481 x 411 x 330 mm
Weight (Approximate)		22.5 lbs 10.20 kg

Are the RB-110 Technical Specifications subject to change?

Yes, all specifications are subject to change.

What are the RB-112 Technical Specifications?

FEATURE	SPECIFICATION	VALUE
Output Power Rating		100 Watts RMS @ 4 Ω 10% THD+N
Signal-to-Noise Ratio		80 dB (20 Hz–20 kHz unweighted)
Maximum Gain @ 1 kHz Input	Input:	48.5 dB
	Aux Input:	33 dB
	Effects Return:	29 dB
Input Impedance	Normal Input:	1Meg Ohms
	-15dB Pad Input:	75k Ohms
Tone Controls	Bass:	+14/–13 dB @ 40 Hz
	Mid:	+15/–9 dB @ 500 Hz
	Treble:	+12/–20 dB @ 4 kHz
Speaker Specs		1 x 12" custom Lavoce speaker, 4 Ω
Maximum Operating Range		45° C ambient temperature, 93% relative humidity, up to 2000 m altitude
Power Requirements		100–240V AC ~ 50-60 Hz, 150W Max
Size (H x W x D)		21.4 x 18.2 x 14.2 inches 543 x 462 x 360 mm
Weight (Approximate)		25.9 lbs 11.75 kg

Are the RB-112 Technical Specifications subject to change?

Yes, all specifications are subject to change.

What are the RB-115 Technical Specifications?

FEATURE	SPECIFICATION	VALUE
Output Power Rating		200 Watts RMS @ 4 Ω 0.5% THD+N (with external speaker)
		100 Watts RMS @ 8 Ω 0.5% THD+N
Signal-to-Noise Ratio		90 dB (20 Hz–20 kHz unweighted)
Maximum Gain @ 1 kHz Input	Input:	60 dB
	Aux Input:	39 dB
	Effects Return:	32 dB
Input Impedance	Normal Input:	1Meg Ohms
	-15dB Pad Input:	75k Ohms
Tone Controls	Bass:	+14/–9 dB @ 40 Hz
	Mid:	+15/–9 dB @ 500 Hz
	Treble:	+12/–24 dB @ 4 kHz
Speaker Specs		1 x 15" custom Lavoce speaker, 8 Ω
Maximum Operating Range		45° C ambient temperature, 93% relative humidity, up to 2000 m altitude
Power Requirements		100–240V ~ 50-60 Hz, 280W Max
Size (H x W x D)		22.4 x 20.2 x 13.94 inches 570 x 513 x 354 mm
Weight (Approximate)		33.4 lbs 15.45 kg

Are the RB-115 Technical Specifications subject to change?

Yes, all specifications are subject to change.

What are the RB-210 Technical Specifications?

FEATURE	SPECIFICATION	VALUE
Output Power Rating		500 Watts RMS @ 4 Ω 5% THD+N (with external speaker)
		250 Watts RMS @ 8 Ω 2% THD+N
Signal-to-Noise Ratio		91 dB (20 Hz–20 kHz unweighted)
Maximum Gain @ 1 kHz Input	Input:	73 dB
	Aux Input:	52 dB
	Effects Return:	36 dB
Input Impedance	Normal Input:	1Meg Ohms
	-15dB Pad Input:	75k Ohms
Tone Controls	Bass:	+14/–9 dB @ 40 Hz
	Mid:	+15/–9 dB @ 500 Hz
	Treble:	+12/–24 dB @ 4 kHz
Speaker Specs		2 x 10" custom Lavoce speakers, 16 Ω each (8 Ω in parallel)
		1 HF compression driver
Maximum Operating Range		45° C ambient temperature, 93% relative humidity, up to 2000 m altitude
Power Requirements		100–240V ~ 50-60 Hz, 600W Max
Size (H x W x D)		25.75 in x 20.2 in x 13.94 inches 654 x 513 x 354 mm
Weight (Approximate)		38 lbs 17.7 kg

Are the RB-210 Technical Specifications subject to change?

Yes, all specifications are subject to change.

How can I learn about the warranty coverage in my local market?

Visit WWW.AMPEG.COM. Please keep your sales receipt in a safe place.

Where can I register my product?

Visit WWW.AMPEG.COM.

Where can I contact Technical Support?

Visit WWW.AMPEG.COM or call 818-575-3600.

What is the website for Ampeg?

http://www.ampeg.com

What is the address of Yamaha Guitar Group, Inc.?

26580 Agoura Road, Calabasas, CA 91302-1921 USA