FREE ENGLISH ALARMTECH JB370 (01) PDF DOCUMENT.
FREE ENGLISH ALARMTECH JB370 (01) PDF USER GUIDE.
FREE ENGLISH ALARMTECH JB370 (01) PDF USER MANUAL.
FREE ENGLISH ALARMTECH JB370 (01) PDF OWNER GUIDE.
FREE ENGLISH ALARMTECH JB370 (01) PDF OWNER MANUAL.
FREE ENGLISH ALARMTECH JB370 (01) PDF REFERENCE GUIDE.
FREE ENGLISH ALARMTECH JB370 (01) PDF INSTRUCTION GUIDE.
FREE ENGLISH ALARMTECH JB370 (01) PDF REFERENCE MANUAL.
FREE ENGLISH ALARMTECH JB370 (01) PDF INSTRUCTION MANUAL.
FREE ENGLISH ALARMTECH JB370 (01) PDF OPERATING INSTRUCTIONS.
CLICK HERE TO DOWNLOAD ALARMTECH JB370 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What is the JB370 Junction box?
Junction box JB370 is a product which simplifies glass break products connections in alarm applications.
Each box is equipped with an opening protection switch.
How should the JB370 Junction box be mounted?
Plastic bottom housing should be attached to the surface by screws.
Housing construction allows to mount device directly on cable or through casing using attached accessories (housing got special areas to break out plastic).
During installation (screwing) don’t use too much excessive force (PCB or housing can be damaged).
Device is intended for indoor applications.
What is the operating principle of the JB370 Junction box?
JB370 Junction box is used for simple signal transmission between glass break detectors and user interface. The device has a 3 way terminal for communication with other JB370 boxes or interface unit IU370 and a 6 way connection terminal for communication with glass break detector. End of line 2.2k resistor operates when jumper is inserted.
What are the ordering details for the JB370?
| Type | E-nr | Description |
|---|---|---|
| JB370 | Junction box JB370 |
What are the technical specifications of the JB370?
| Tamper protection | Opening |
| Contact rating max. | 10 W, 48 V DC/AC |
| Tamper contact rating | 30 VDC / 50 mA |
| Housing material | plastic ABS |
| Colour | White |
| Dimensions (L x W x H) | 91 x 31 x 23 |
| Cable connection type | Standard wire max Ø2.5 mm |
| Surface mounting | SCREWS 3,5×19 |
| Terminal block type | 6 and 3 way screw terminal |
CLICK HERE TO DOWNLOAD ALARMTECH JB370 (01) PDF DOCUMENT