AIWA BSTU-750 (01) PDF Document

The AIWA BSTU-750 package contains the following items:

• Multimedia Home Speaker unit

• Remote control

• Power cord

• RCA audio cable

• Quick guide

To connect the AIWA BSTU-750 to the mains power:

1. Plug the power cord into the AC IN port located on the back of the speaker.

2. Plug the other end of the power cord into a wall power outlet.

To power the speaker on, press the power button once. The display will light up.

To put the speaker in standby mode (power off), press the power button again. The display will then show the clock.

To set the time on your AIWA BSTU-750, the unit must be turned off and in standby mode (showing the clock).

1. Press and hold the “SCAN” button for 2 seconds. The hour digits on the display will begin to flash.

2. Turn the rotary knob to set the correct hour.

3. Press the “SCAN” button again. The minute digits will begin to flash.

4. Turn the rotary knob to set the correct minutes.

5. Press the “SCAN” button one more time to save the time setting.

To mute the sound, press the MUTE button on the remote control once. To unmute the sound, press the MUTE button again.

You can change the function or input mode by repeatedly pressing the function mode button on the speaker panel. Alternatively, you can use the dedicated buttons on the remote control (HDMI ARC, BT, OPT, AUX, USB) to select your desired source.

Please note that to access USB mode, you must first insert a USB drive.

To adjust the volume, you can either turn the large rotary knob on the front panel of the speaker or use the volume up and down buttons on the remote control.

You can adjust the bass and treble using either the speaker panel or the remote control.

1. Press the BASS or TREBLE button on the front panel to access the corresponding menu.

2. The current level will be shown on the display.

3. Rotate the volume knob to adjust the value up or down.

4. The display will return to normal after a few seconds, and your setting will be saved.

To use the FM radio feature:

1. Switch to FM mode.

2. To automatically scan for and save available radio stations, press and hold the SCAN button.

3. To scroll through the saved preset stations, press the previous or next track buttons on the speaker panel or the remote control.

To connect a device like a smartphone via Bluetooth:

1. Select the Bluetooth (BT) mode on the speaker. The display will show a flashing Bluetooth icon.

2. On your smartphone or other device, turn on Bluetooth and search for available devices.

3. Select “AIWA BSTU-750” from the list of devices to pair.

4. Once connected, the Bluetooth icon on the speaker’s display will stop flashing and remain solid.

The speaker will automatically connect with a previously paired device when in range and in BT mode.

To use the HDMI Audio Return Channel (ARC) feature:

1. Connect an HDMI cable from your TV’s port labeled “HDMI ARC” to the “ARC” port on the back of the AIWA BSTU-750.

2. Set the speaker’s input mode to ARC.

3. On your TV, ensure that the audio output settings are configured to use HDMI ARC.

When playing music in either Bluetooth or USB mode, you can use the play/pause, next track, and previous track buttons located on the front panel of the speaker or on the remote control to manage playback.

While playing music in USB mode, you can change the play mode by pressing the ‘repeat’ button on the remote control. This allows you to cycle through options such as repeat one track or repeat all tracks.

To connect a device using the optical input:

1. Connect one end of an optical audio cable to the optical audio output of your external device (e.g., TV, game console).

2. Connect the other end of the cable to the “OPT IN” port on the back of the speaker.

3. Switch the speaker’s input mode to OPTICAL.

To connect a device using the AUX input:

1. Connect an RCA audio cable from the audio output of your external device to the “L” and “R” AUX IN ports on the back of the speaker.

2. Switch the speaker’s input mode to AUX.