AIWA BST-130 (01) PDF Document

The box for the AIWA BST-130 contains the following items:

• AIWA BST-130 Speaker

• Quick Guide

• Type-C Cable

The AIWA BST-130 features controls on the top and ports on the rear.

Top Controls:

• PLAY/PAUSE / SCAN & SEARCH FM STATION

• FM TUNE + / INCREASE VOL + / NEXT SONG

• FM TUNE – / DECREASE VOL – / PREV SONG

• MODE M / TWS

• LED + / LED LIGHTS

Rear Ports:

• ON/OFF switch

• AUX input

• DC 5V (USB-C) charging port

• TF CARD slot

• USB-MP3 port

To charge the AIWA BST-130, connect the supplied Type-C cable to the DC 5V port on the rear of the speaker. Connect the other end of the cable to a USB power source. A light will indicate that the device is charging. The light will turn off when the battery is fully charged.

To power the AIWA BST-130 on or off, use the ON/OFF switch located on the rear of the speaker. Slide the switch to the ON position to turn the speaker on, and slide it to the OFF position to turn it off.

Step 1. Turn on the AIWA BST-130. The LED light will start flashing, indicating it is ready for pairing.

Step 2. On your smartphone or other Bluetooth device, enable Bluetooth and search for available devices.

Step 3. Select “AIWA BST-130” from the list of devices. The LED light will become solid once the connection is successful.

The maximum Bluetooth connection distance is 10 meters.

To use the TWS function to connect two AIWA BST-130 speakers for stereo sound, follow these steps:

Step 1. Power on two AIWA BST-130 speakers.

Step 2. On one of the speakers, press and hold the MODE M / TWS button for 3 seconds. The speakers will then pair with each other.

Step 3. Once the two speakers are paired together, you can connect your Bluetooth device to the main speaker to play music in stereo.

Step 1. Insert a USB drive containing MP3 audio files into the USB-MP3 port on the back of the speaker.

Step 2. The speaker will automatically detect the USB drive, switch to USB-MP3 mode, and begin playing the music.

Step 1. Insert a TF card (microSD) into the TF CARD slot located on the rear of the speaker.

Step 2. The speaker will automatically switch to TF mode and start playing the audio files from the card.

To use the FM radio, first press the MODE M / TWS button repeatedly until you enter Radio Mode. To search for stations, press the PLAY/PAUSE button once to initiate an automatic scan. The speaker will find and save all available stations.

Music Control:

• Play/Pause: Press the PLAY/PAUSE button once.

• Next Song: Press the NEXT SONG (►►) button once.

• Previous Song: Press the PREV SONG (◄◄) button once.

Volume Adjustment:

• Increase Volume: Press and hold the INCREASE VOL (+) button.

• Decrease Volume: Press and hold the DECREASE VOL (-) button.

When the speaker is connected to your phone via Bluetooth, you can manage calls using the PLAY/PAUSE button:

• Answer an incoming call: Press the PLAY/PAUSE button once.

• End a call: Press the PLAY/PAUSE button once.

• Reject an incoming call: Press and hold the PLAY/PAUSE button for 3 seconds.

To change the lighting effect, press the LED + / LED LIGHTS button on the top of the speaker. Pressing the button will cycle through the 12 available lighting effects.

Step 1. Plug one end of a 3.5mm audio cable into the AUX port on the rear of the speaker.

Step 2. Plug the other end of the cable into the headphone jack of your audio source (e.g., smartphone, MP3 player).

Step 3. The speaker should automatically switch to AUX mode. If not, press the MODE M / TWS button to select it manually.

The AIWA BST-130 has the following features:

• 5W RMS Output Power

• Bluetooth connectivity up to 10 meters

• Play your MP3 files

• Hands-free calling

• Compatible with AUX IN

• True Wireless Stereo (TWS)

• Digital FM Radio

• Selectable ON/OFF RGB Lighting