AFTERSHOKZ AEROPEX AS800 (01) PDF Document

To charge your AFTERSHOKZ AEROPEX AS800 headphones, connect them to the included magnetic induction charging cable. The LED indicator will turn red during charging and will turn blue when charging is complete.

The AFTERSHOKZ AEROPEX AS800 features a moisture detection alert. If moisture is detected on the charging port while it is plugged in, the headphones will vibrate and emit a beeping sound. If this occurs, disconnect the charging cable, dry the port, and then proceed with charging.

Follow these steps to pair your AFTERSHOKZ AEROPEX AS800 for the first time:

1. Start with the headphones powered off.

2. Enter pairing mode by pressing and holding the volume+ button until Audrey says “pairing” and the LED indicator flashes red and blue.

3. Open your device’s Bluetooth® menu and select “Aeropex by AfterShokz.” Audrey will say “connected” and the LED indicator will flash blue one time.

After your AFTERSHOKZ AEROPEX AS800 has been paired with a device, you can connect it by powering it on. To power on, press and hold the volume+ button for 2 seconds. Audrey will say “Welcome to AfterShokz”. The headphones will automatically connect to the last used device if it is in range.

The Multifunction Button on your AFTERSHOKZ AEROPEX AS800 controls various playback and call functions:

Play/pause music: Click once

Skip to next song: Double-click while music is playing

Skip to previous song: Triple-click while music is playing

Answer/end call: Click once

Answer call waiting and end current call: Press and hold for 2 seconds

Reject a call: Press and hold for 2 seconds

Activate voice assistant: Press and hold for 2 seconds

Redial last number: Double-click (when idle)

The Volume Up/Power (+) and Volume Down (-) buttons on your AFTERSHOKZ AEROPEX AS800 have the following functions:

Power on/off: Press and hold the volume+ button for 2 seconds

Mute: Press and hold both buttons for 2 seconds while on a call

Change EQ: Press and hold both buttons for 3 seconds while music is playing

Check battery status: Click the volume+ or volume- button while music is paused

Adjust volume: Click the volume+ or volume- button to adjust volume

To change the EQ settings on your AFTERSHOKZ AEROPEX AS800, press and hold both the volume+ and volume- buttons simultaneously for 3 seconds while music is playing. Audrey will announce the new EQ mode, such as “EQ changed”.

To check the battery status of your AFTERSHOKZ AEROPEX AS800, pause your music and click either the volume+ or volume- button. Audrey will announce the battery level with one of the following messages:

• Battery high

• Battery medium

• Battery low

• Charge me

Multipoint pairing allows your AFTERSHOKZ AEROPEX AS800 to connect to two devices at once. Follow these steps to enable it:

1. Start with your headphones powered off.

2. Press and hold the volume+ button until Audrey says “pairing” and the LED indicator flashes red and blue.

3. Press and hold the multifunction button and volume+ button for 3 seconds. Audrey will say “multipoint enabled.”

4. Pair the first device. Open your first device’s Bluetooth® menu and select “Aeropex by AfterShokz.” Audrey will say “connected.”

5. Turn your headphones off.

6. Re-enter pairing mode by pressing and holding the volume+ button until Audrey says “pairing” and the LED indicator flashes red and blue.

7. Pair the second device. Open your second device’s Bluetooth® menu and select “Aeropex by AfterShokz.” Audrey will say “connected.”

8. Turn your headphones off.

9. Turn your headphones on. Your headphones are now connected to both devices.

To disable multipoint pairing, press and hold the multifunction button and volume- button for 3 seconds during pairing mode. Audrey will say “multipoint disabled.”

If you encounter connection issues with your AFTERSHOKZ AEROPEX AS800, you can perform a reset. Follow these steps:

1. Start with the headphones powered off.

2. Enter pairing mode by pressing and holding the volume+ button until Audrey says “pairing” and the LED indicator flashes red and blue.

3. Press and hold the multifunction button, volume+ button and volume- button (all three buttons) simultaneously for 3-5 seconds, until you hear two beeps or feel vibrations.

4. Turn your headphones off. Your AFTERSHOKZ AEROPEX AS800 is now reset and will need to be re-paired with your device(s).

Use the provided earplugs with your AFTERSHOKZ AEROPEX AS800 headphones in environments where it is safe to block out ambient noise, such as on a train or airplane. Using the earplugs will enhance the audio experience.

To ensure the longevity of your AFTERSHOKZ AEROPEX AS800, please follow these storage and maintenance guidelines:

• Store the headphones in a cool and dry place. The working temperature should be 0~45°C(32~113°F).

• Working in a cold/hot environment, a highly humid area, or an area with extremely low air pressure may reduce battery life.

• Keep the product away from heat sources, direct sunlight, combustible gas or other liquids.

• Keeping the charging port dry before connecting to the charger will reduce the risk of damage.

• The headphones are water-resistant, but are NOT waterproof. Please DO NOT submerge the headphones in water.

• Clean the headphones with a soft dry cloth.

• Do not charge right after exercising, in case there’s sweat inside the charging port, which could lead to circuit burning while charging.

• After storage for a long period, please charge the headphones before using them again.