FREE ENGLISH ADVANTECH PCLD-8712 (01) PDF USER GUIDE
FREE ENGLISH ADVANTECH PCLD-8712 (01) PDF USER MANUAL
FREE ENGLISH ADVANTECH PCLD-8712 (01) PDF OWNER GUIDE
FREE ENGLISH ADVANTECH PCLD-8712 (01) PDF OWNER MANUAL
FREE ENGLISH ADVANTECH PCLD-8712 (01) PDF REFERENCE GUIDE
FREE ENGLISH ADVANTECH PCLD-8712 (01) PDF INSTRUCTION GUIDE
FREE ENGLISH ADVANTECH PCLD-8712 (01) PDF REFERENCE MANUAL
FREE ENGLISH ADVANTECH PCLD-8712 (01) PDF INSTRUCTION MANUAL
FREE ENGLISH ADVANTECH PCLD-8712 (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD ADVANTECH PCLD-8712 (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the features of the PCLD-8712 Screw-terminal Board?
Low-cost screw-terminal board for the PCI-1712/1732 with 68-pin SCSI-II connector.
Reserved space for signal-conditioning circuits such as low-pass filter, voltage attenuator and current shunt.
Industrial-grade screw-clamp terminal blocks for heavy-duty and reliable connections.
DIN-rail mounting case for easy mounting.
Dimensions: 169 mm (W) x 112mm (L) x 51mm (H) (6.7″ x 4.4″ x 2.0″)
What is the board layout of the PCLD-8712?
CN1: 68-pin SCSI-II connector for connection with the PCI-1712
CN2: 20-pin connector for digital I/O
What is the pin assignment for the CN2 digital I/O connector?
| CN | |||
|---|---|---|---|
| DIO 0 | 1 | 2 | DIO 1 |
| DIO 2 | 3 | 4 | DIO 3 |
| DIO 4 | 5 | 6 | DIO 5 |
| DIO 6 | 7 | 8 | DIO 7 |
| DIO 8 | 9 | 10 | DIO 9 |
| DIO 10 | 11 | 12 | DIO 11 |
| DIO 12 | 13 | 14 | DIO 13 |
| DIO 14 | 15 | 16 | DIO 15 |
| DGND | 17 | 18 | DGND |
| +5 V | 19 | 20 | +12 V |
How do I configure a straight-through single-ended connection (factory setting)?
This configuration applies to channels n = 0, 1, 2,…..,15. Use the following component values:
RAn = 0 Ω (short)
RBn = none
Cn = none
How do I configure a 1.6 kHz (3dB) low pass filter for single-ended connections?
Use the following component values:
RAn = 10 kΩ
RBn = none
Cn = 0.01 µF
How do I configure a 10:1 voltage attenuator for single-ended connections?
Use the following component values:
RAn = 9 kΩ
RBn = 1 kΩ
Cn = none
How do I configure a 4 ~ 20 mA to 1 ~ 5 VDC signal converter for single-ended connections?
Use the following component values:
RAn = 0 Ω (short)
RBn = 250 Ω (0.1% precision resistor)
Cn = none
How do I configure a straight-through differential connection (factory setting)?
This configuration applies to channels n = 0, 2, 4,…..,14. Use the following component values:
RAn = 0 Ω (short)
RAn+1 = 0 Ω (short)
RDn = none
CDn = none
How do I configure a 1.6 kHz (3dB) low pass filter for differential connections?
Use the following component values:
RAn = 5 kΩ
RAn+1 = 5 kΩ
RDn = none
CDn = 0.01 µF
How do I configure a 10:1 voltage attenuator for differential connections?
Use the following component values:
RAn = 4.5 kΩ
RAn+1 = 4.5 kΩ
RDn = 1 kΩ
Cn = none
Attenuation Formula: Attenuation = RDn / (RAn + RAn+1 + RDn)
CLICK HERE TO DOWNLOAD ADVANTECH PCLD-8712 (01) PDF MANUAL