Post questions, comments, reviews or page errors in the comment box below.

Click here to download ACER H112 (01) PDF MANUAL


PDF Content Summary:

****** Page 1 ****** Acer Projector 1<520/1-4112/PH-X01 Series User's Guide ****** Page 2 ****** Copyright 0 2012. Acer Incorporated. All Rights Reserved. Acer Projector K520/H 112/PH-X01 Series User's Guide Original Issue: 03/2012 Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications. This company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims the implied warranties of merchantability or fitness for a particular purpose. Record the model number, serial number, purchase date and place of purchase information in the space provided below. The serial number and model number are recorded on the label affixed to your projector. All correspondence concern ing your unit should include the serial number, model number and purchase information. No part of this publication may be reproduced, stored in a retrieval system, or transm itted, in any form or by any means, electron ically, mechan ically, by photocopy, recording or otherwise, without the prior written permission of Acer Incorporated. Acer Projector K520/H112/PH-X01 Series Model number: Serial number: Date of purchase: Place of purchase: Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies' product names or trademarks are used herein for identification purposes only and belong to their respective companies. HDMITM, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. " ****** Page 3 ****** ili Information for your safety and comfort Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Turning the product off before cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. Caution for plug as disconnecting device Observe the following guidelines when connecting and disconnecting power to the external power supply unit: Install the power supply unit before connecting the power cord to the AC power outlet. Unplug the power cord before removing the power supply unit from the projector. If the system has multiple sources of power, disconnect power from the system by unplugging all power cords from the power supplies. Caution for Accessibility Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible. When you need to disconnect power to the equipment, be sure to unplug the power cord from the electrical outlet. Warnings! Do not use this product near water. Do not place this product on an unstable cart, stand or table. If the product falls, it could be seriously damaged Slots and openings are provided for ventilation to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should never be placed near or over a radiator or heat register, or in a built-in installation unless proper ventilation is provided. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind onto or into the product. ****** Page 4 ****** To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface. Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices. Using electrical power This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company. Do not allow anything to rest on the power cord. Do not locate this product where people will walk on the cord. If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating Do not overload a power outlet, strip or receptacle by plugging in too many devices. The overall system load must not exceed 80% of the branch circuit rating. If power strips are used, the load should not exceed 80% of the power strip's input rating. This product's AC adapter is equipped with a three-wire grounded plug. The plug only fits in a grounded power outlet. Make sure the power outlet is properly grounded before inserting the AC adapter plug. Do not insert the plug into a non-grounded power outlet. Contact your electrician for details. Warning! The grounding pin is a safety feature. Using a power outlet that is not properly grounded may result in electric shock and/or injury. Note: The grounding pin also provides good protection from unexpected noise produced by other nearby electrical devices that may interfere with the performance of this product. Use the product only with the supplied power supply cord set. If you need to replace the power cord set, make sure that the new power cord meets the following requirements: detachable type, UL listed/CSA certified, VDE approved or its equivalent, 4.5 meters (15 feet) maximum length. ****** Page 5 ****** Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel Unplug this product from the wall outlet and refer servicing to qualified service personnel when: the power cord or plug is damaged, cut or frayed liquid was spilled into the product the product was exposed to rain or water the product has been dropped or the case has been damaged the product exhibits a distinct change in performance, indicating a need for service the product does not operate normally after following the operating instructions Note: Adjust only those controls that are covered by the operating instructions, since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal condition. Warning! For safety reasons, do not use non-compliant parts when adding or changing components. Consult your reseller for purchase options. Your device and its enhancements may contain small parts. Keep them out of the reach of small children. Additional safety information Do not look into the projector's lens when the light is on. The bright may hurt your eyes. Turn on the projector first and then signal sources Do not place the product in following environments: Space that is poorly ventilated or confined. At least 50cm clearance from walls and free flow of air around the projector is necessary. Locations where temperatures may become excessively high, such as inside of a car with all windows rolled up. Locations where excessive humidity, dust, or cigarette smoke may contaminate optical components, shorten ing the life span and darkening the image. Locations near fire alarms. Locations with an ambient temperature above 40 00104 OF. Locations where the altitudes are higher than 10000 feet. Unplug immediately if there is something wrong with your projector. Do not operate if smoke, strange noise or odor comes out of your projector. It ****** Page 6 ****** might cause fire or electric shock. In this case, unplug immediately and contact your dealer. Do not keep using this product to break or drop it. In this case contact your dealer for inspection. Do not face the projector lens to the sun. It can lead to fire. When switching the projector off, suggest to ensure the projector completes its cooling cycle before disconnecting power. Do not frequently turn off the main power abruptly or unplug the projector during operation. The best way is to wait for the fan to turn off before turning main power off. Do not touch air outlet grille and bottom plate which becomes hot. Clean the air filter frequently if have. The temperature inside may rise and cause damage when the filter/ventilation slots clogged with dirt or dust. Do not look into the air outlet grille when projector is operating. It may hurt your eyes. Always open the lens shutter or remove the lens cap when the projector is on. Do not block the projector lens with any object when the projector is under operation as this could cause the object to become heated and deformed or even cause a fire. Do not attempt to disassemble this projector. There are dangerous high voltages inside which may hurt you. Refer servicing only to suitable qualified professional service personnel. Do not stand the projector on end vertically. It may cause the projector to fall over, causing injury or damage. Caution for Listening To protect your hearing, follow these instructions. Increase the volume gradually until you can hear clearly and comfortably. Do not increase the volume level after your ears have adjusted. Do not listen to music at high volumes for extended periods. Do not increase the volume to block out noisy surroundings. Decrease the volume if you can't hear people speaking near you. ****** Page 7 ****** Vli Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle. For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit acer-group.com/public/Sustainability/sustainability01.htm ****** Page 8 ****** VIII First things first Usage Notes Turn off the product before cleaning Use a soft cloth moistened with mild detergent to clean the display housing. Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Don't: Block the slots and openings on the unit provided for ventilation. Use abrasive cleaners, waxes or solvents to clean the unit. Use under the following conditions: In extremely hot, cold or humid environments. In areas susceptible to excessive dust and dirt Near any appliance that generates a strong magnetic field. Place In direct sunlight. Precautions Follow all warnings, precautions and maintenance as recommended in this user's guide to maximize the life of your unit. Warning: Do not look into the projector's lens when the light is on. The bright may hurt your eyes. To reduce the risk of fire or electric shock, do not expose th is product to rain or moisture. Please do not open or disassemble the product as th is may cause electric shock. When switch ing the projector off, please ensure the projector completes its cooling cycle before disconnecting power. Turn on the projector first and then the signal sources. Do not use lens cap when projector is in operation. ****** Page 9 ****** Information for your safety and comfort First things first Usage Notes Precautions Introduction Product Features Package Overview Projector Overview Projector Outlook Control Panel Remote Control Layout Getting Started Connecting the Projector Turning the Projector On/Off Turning on the Projector Turning the projector off Adjusting the Projected Image Adjusting the Height of Projected Image How to optimize image size and distance How to get a preferred image size by adjusting distance and zoom User Controls Installation menu Acer Empowering Technology Onscreen Display (OSD) Menus Color Image Setting Management Audio Language Appendices iii viii VIII VIII 1 1 2 3 3 4 5 7 7 8 8 9 10 10 11 13 15 15 16 17 18 20 22 25 25 26 27 28 ****** Page 10 ****** Troubleshooting LED & Alarm Definition Listing Ceiling Mount Installation Specifications Compatibility modes Regulations and safety notices 28 32 33 36 38 42 ****** Page 11 ****** 1 Introduction Product Features This product is a single-chip DLP@ projector. Outstanding features include: DLP@ technology 1024 x 768 XGA resolution 4:3/16:9 aspect ratio supported Versatile display modes (Bright, Presentation, Standard,Video, Picture, Game, Education, User) enable optimum performance in any situation NTSC/PAL/SECAM compatible and HDTV (480i/p, 576i/p, 720p, 1080i/p) supported Compact size projector facilitates business purposes and home entertainment. Acer EcoProjeciton Technology delivers Intelligent power management approach and physical efficiency improvement Empowering Key reveals Acer Empowering Technology utilities (Acer eView, eTimer, e3D, ePower Management) for easy adjustment of settings Equipped with HDMITM connection supporting HDCP Advanced digital keystone correction delivers optimum presentations Multi-language on screen display (OSD) menus Environmental light source and longer life by Laser/LED solution. Microsoft@ Windows 2000, XP, Vista Windows 7, Macintosh@ OS compliant ****** Page 12 ****** 2 Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if any thing is missing. Projector with lens cap Power cord Quick start guide VGA cable 0 Carrying case 2 x Battery Composite video cable ooo öööö 0000 0000 Remote control User's Guide ****** Page 13 ****** 3 Projector Overview Projector Outlook Front / upper side 6 7 8 345 2 2 3 4 Description Lens cap Tilt adjusting wheels Zoom Lens Focus ring 2 LO 9 3 5 6 7 8 4 6 7 8 9 10 Description Zoom lever Remote control receivers Control panel Power button Rear side 1 5 6 ebi 10 Description RS232 connector 7 o o AUDI out 8 Description 1 2 3 4 5 Composite video input connector S-Video input connector PC analog signal/HDTV/component video input connector HDMI connector USB ctrl connector Audio input connector Audio output connector Power socket KensingtonTM lock port ****** Page 14 ****** 4 Control Panel 4 10- 9 2 3 LAMP TEMP MENU 8 SOURCE escriptlon 5 7 1 2 3 4 5 6 7 8 9 con d) anncoo aaocoo aaccoo au ceca un RESYNC 1 Ion 6 9 10 I I POWER LAMP TEMP RESYNC SOURCE MENU Empowering key Remote control receiver Keystone Four directional select keys Power button and Power Indicator LED. See the contents in "Turning the Projector On/Off" section. Lamp Indicator LED Temp Indicator LED Automatically synchronizes the projector to the input source. Changes the active source. Press "MENU " to launch the Onscreen display (OSD) menu, back to the previous step for the OSD menu operation or exit the OSD menu. Unique Acer functions: eView, eTimer, e3D and ePower Management. Receives signals from remote control Adjusts the image to compensate for distortion caused by tilting the projector (± 40 degrees). Use the keys to select items or make adjustments to your selection. ****** Page 15 ****** Remote Control Layout 1 2 4 7 9 11 13 15 16 17 19 21 5 ASPECT FREEZE HIOE POWER VOL 200M CDI PAGE 3 5 6 8 10 • 12 14 18 20 22 RESYNC SOURCE zoom MENU lö'oöl VGA % s.V10E0i 23 —LPP @ 0-1—24 26 25 27 29 31 con 28 30 acer un Ion Model No-A-38051 Rating : DC sV 60mAMAX. VZ JBLOO.OOI escri tion 2 3 4 5 6 7 8 9 Infrared tran sm itter POWER HIDE FREEZE ASPECT RATIO SOURCE RESYNC ZOOM Bac Sends signals to the projector. Re er tot e "Turning t e ProJectorO O " section. Momentarily turns off the video. Press HIDE" to hide the image, press again to display the image. To pause the screen image. To ooset e eslre aspect ratio Auto/4:3/16:9 Press "SOURCE" to c oose rom RGB, Component, S-VI eo, Composite, HDTV and HDMITM sources. Automatically synchronizes the projector to the input source. Zoomst e projector Isp ay In or out. No unction. ****** Page 16 ****** 6 10 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 con un Ion Backlight Enter Four Irecüona select keys KEYSTONE MENU MOUSE Le Right Click Empowering VOLUME PAGE oo prev Next P ay/Pause Stop VGA S-VIDEO COMPONENT VIDEO SD/USB A USB B HDMITM/DVI LANIWiFl KeyPad ey escri tion " to trigger backlight mode Press Continue to light 3 sec then disappear if no action. Continue to light if action and keep 3 sec finally. No unction. Use up, own, e t, rig t uttons to se ect Items or ma e adjustments to your selection. A Justst e mage to compensate or Istortlon cause y tilting the projector (± 40 degrees). Press " MENU" to launch the Onscreen display (OSD) menu, back to the previous step for the OSD menu operation or exit the OSD menu. Confirm your selection of items. Le -Ing t-c uttons are ont e e tan rig t, respectively; the center button works as a mu Itidirectional pointer stick. To enable this function, an USB cable must be connected to projector from your PC. Unique Acer unctions: eVlew, eTimer, e3D, ePower Management. Increases/ ecreasest e vo ume. For computer mo eon y. Use t IS utton to se ectt e next or previous page. This function is only available when connected to a computer via a USB cable. No unction. No function. No unction. No unction. Press "VGA" to ange source tot e VGA connector. T IS connector supports analog RGB, YPbPr (480p/576p/720p/ 1080i), YCbCr (480iß76i) and RGBsync. To change source to S-Video. No function. To change source to COMPOSITE VID EO. No function. No function. Press HDMITM/DVI'I to change source to HDMITM. No function. Press "0-9" to input a password in the "Security". ****** Page 17 ****** 7 Getting Started Connecting the Projector S-Video Output Video Output VGA 4 3 VUOEO 5 WSub 8 6 RS232 RS232 DVD player, Set-top Box, HDTV receiver Description Power cord 1 2 RS232 cable Composite video cable 3 S-Video cable 4 VGA cable 5 USB cable 6 HDMI 10 9 7 O 11 Audio Output Description Audio cable jack/jack 7 VGA to component/HDTV adapter 8 3 RCA component cable 9 10 HDMI cable Audio cable Jack/RCA 11 Note: To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible with the projector. ****** Page 18 ****** 8 Turning the Projector On/Off Turning on the Projector 1 2 3 4 Remove the lens cap.(lllustration #1) Ensure that the power cord and signal cable are securely connected. The Power indicator LED will flash red Turn on the projector by pressing " Power" button on the control panel, and the Power indicator LED will turn blue.(lllustration #2) Turn on your source (computer, notebook, video player ,etc.). The projector will detect your source automatically. If the screen displays JJ Lock" and "Source" icons, it means the projector is locked onto a specific source type and there is no such type of input signal detected. If the screen displays "No Signal", please make sure the signal cables are securely connected. If you connect to multiple sources at the same time, use the "Source " button on either control panel or the remote control or direct source key on the remote control to switch between inputs. Q) 2 Power button 1 Lens cap ****** Page 19 ****** 9 Turning the projector off 1 2 To turn the projector off, press the power button. This message appears: " Please press the power button again to complete the shutdown process. " Press the power button again. It is now safe to unplug the power cord Warning indicators: " Projector Overheated. Will automatically turn off soon. " This onscreen message indicates that the projector has overheated. The projector will automatically shut down. Contact your local dealer or service center. "Fan failed. Will automatically turn off soon." This onscreen message indicates that the fan has failed. The projector will automatically shut down. Contact your local dealer or service center. Note: Whenever the projector automatically shuts down, contact your local reseller or service center. ****** Page 20 ****** 10 Adjusting the Projected Image Adjusting the Height of Projected Image The projector is equipped with tilt adjusting wheels for adjusting the height of image. To raise/lower the image: Use Tilt adjusting wheels to fine-tune the display angle. 1 1 1 'iü'lllillilijl' Tilt adjusting wheel ****** Page 21 ****** 11 How to optimize image size and distance Consult the table below to find the optimal image sizes achievable when the projector is positioned at a desired distance from the screen. Example: If the projector is 2.5 m from the screen, good image quality is possible for image sizes between 57" and 63" Note: Remind as below figure, the space of 111 cm height is required when located at 2.5 m distance. Min screen size Height: 111 cm Form base to top of image Height: I OOcm 2.5 m Desired Distance Figure: Fixed distance with different zoom and screen size. ****** Page 22 ****** 12 Desired Distance (m) 2 2.5 3 3.5 4 4.5 5 6 7 8 9 10 Screen size (Min zoom) Top From base Screen size (Max zoom) Diagonal Diagonal to top of (inch) W (cm)x H (cm) (inch) W (cm)x H (cm) 23 46 57 69 80 92 103 114 137 160 183 206 229 47 x 35 93 x 70 116 x 87 140 x 105 163 x 122 186 x 140 209 x 157 233 x 174 279 x 209 326 x 244 372 x 279 419 x 314 465 x 349 image (cm) 40 80 100 120 140 160 181 201 241 281 321 361 401 25 50 63 76 88 101 114 126 151 177 202 227 252 51 x 38 103 x 77 128 x 96 154 x 115 179k 135 205 x 154 231 x 173 256 x 192 308 x 231 359 x 269 410 x 308 462 x 346 513 x 385 Top From base to top of image (cm) 88 133 155 177 199 221 265 310 354 398 442 Zoom Ratio: 1. lx

****** Page 23 ****** 13 How to get a preferred image size by adjusting distance and zoom Height Form base to top of image 2.4 m 2.6 m Desired Distance The table below shows how to achieve a desired image size by adjusting either the position or the zoom ring. For example: to obtain an image size of 60″ set the projector at a distance 2.4 m and 2.6 m from the screen and adjust the zoom level accordingly.

****** Page 24 ****** 14 Screen size Distance (m) Diagonal (inch) 30 40 50 60 70 80 90 100 120 150 180 200 250 300 W (cm) x H (cm) 61 x 46 81 x 61 102 x 76 122 x 91 142 x 107 163 x 122 183 x 137 203 x 152 244 x 183 305 x 229 366 x 274 406 x 305 508 x 381 610 x 457 Max zoom 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 4.8 5.9 7.1 7.9 9.9 11.9 Min zoom 1.3 2.2 2.6 3.5 3.9 4.4 5.2 6.6 7.9 8.7 10.9 Top (cm) From base to top of mage 53 70 88 105 123 140 158 175 210 263 315 351 438 526 Zoom Ratio: 1. lx

****** Page 25 ****** 15 User Controls Installation menu The installation menu provides an onscreen display (OSD) for projector installation and maintenance. Use the OSD only when the message ” No signal input” is displayed on the screen. The menu options include settings and adjustments for screen size and distance, focus, keystone correction and more . 1 2 3 4 5 Turn on the projector by pressing “Power” button on the control pad Press the “MENU” button on the control pad to launch the OSD for projector installation and maintenance. Installation Projection Mode Manual keystone Language Reset Select Entor English Press E Yit The background pattern acts as a guide to adjusting the calibration and alignment settings, such as screen size and distance, focus and more . The Installation menu includes the following options: •Projection Mode •Manual Keystone settings •Language settings •Reset to factory default function Use the up and down arrow keys to select an option, the left and right arrow keys to adjust selected option settings, and the right arrow key to enter a submenu for feature setting. The new settings will be saved automatically upon exiting the menu. Push the menu button anytime to exit the menu and return to the Acer welcome screen.

****** Page 26 ****** 16 Acer Empowering Technology Acer Empowering Key provide four Acer unique functions, they are ” Acer eView Management” , “Acer eTimer Management” , “Acer ePower Management” and i’ Acer e3D Management respectively. key to launch the Onscreen display main menu to modify its Press function. When the Empowering Menu is displayed, use the key to select the main menu. Acer eView Management e mpowering Menu Acer eView Management Educaor, Acer eTimer Management e mpowering Menu Acer eTirner Management Alarm O Minutes Middle e C5GCD Acer ePower Management e mpowering Menu Acer ePower Management Hlgn Altltune Acer e3D Management e mpowering Menu Acer e3D Management ” Acer eView Management” is for display mode selection. Please refer to Onscreen Display Menus section for more detail. ” Acer eTimer Management” provides the reminding function for presentation time control. Please refer to Onscreen Display Menus section for more detail ” Acer ePower Management” provides user one shortcut to save the projector life. Please refer to Onscreen Display section for more detail. ” Acer e3D Management” provides the 3D functions. Please refer to Onscreen Display Menus section for more detail. Invert 31) Invert

****** Page 27 ****** 17 Onscreen Display (OSD) Menus The projector has multilingual OSD that allow you to make image adjustments and change a variety of settings. Using the OSD menus To open the OSD menu, press “MENU” on the remote control or control panel. When the OSD is displayed, use the A v keys to select any item in the main menu. After selecting the desired main menu item, press to enter submenu for feature setting. Use the keys to select the desired item and adjust the settings by using the keys. Select the next item to be adjusted in the submenu and adjust as described above. Press “MENU on the remote control or control panel, the screen will return to the main menu. To exit OSD, press “MENU” on the remote control or control panel again. The OSD menu will close and the projector will automatically save the new settings. Main menu J J Color espla;r Mode wa Color Brightness Ctnrast Sduraficr. Cdor Temperaure Dynamic Slack Gamma See Sub menu Video so : : : 50 c Enter Setting No press

****** Page 28 ****** 18 Color Display Mode Wall color Brig htness Contrast Saturation Tint Color There are many factory presets optimized for various types of m ages. Bright: For brightness optim ization. Presentation: For meeting presentation. Standard: For common environment. Video: For playing video in a bright environment. Picture: For graphic picture. Game: For game content. Education: For education environment. User: Memorize user’s settings. Use this function to choose a proper color according to the wall. There are several choices, including white, light yellow, light blue, pink, dark green. It will compensate the color deviation due to the wall color to show the correct image tone. Adjust the brightness of the image. Press to darken image. Press to lighten the image. “Contrast” controls the difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount of black and wh ite in the image. Press < to decrease the contrast. Press to increase the contrast. Adjusts a video image from black and white to fully saturated color. Press < to decrease the amount of color in the image. Press to increase the amount of color in the image. Adjusts the color balance of red and green. Press to increase the amount of green in the image. Press to increase the amount of red in the image. ****** Page 29 ****** Dynamic Black Color Temperature Color Gamma Gamma 19 Choose "On " to automatically optimize the display of dark movie scenes enabling them to be shown in incredible detail. Mode Use this function to choose CTI (6500K), CT2 (Native CT), CT3 (7500K), User mode. R Gain Adjusts the red gain for color temperature optimization. G Gain Adjusts the green gain for color temperature optimization. B Gain Adjusts the blue gain for color temperature optimization. Gamma Effects the representation of dark scenery. With greater gamma value, dark scenery looks brighter. Note: "Saturation" and "Tint" functions are not supported under computer mode or HDMI mode. ****** Page 30 ****** 20 Image Projection Aspect Ratio 16:9 Manual Keystone H. Position (Horizontal position) V. Position (Vertical position) Frequency Image Aspect Reic MMAA Tin-g;jrg HEM Ferr Front-Desktop • The factory defau It setting. Rear-Desktop When you select this function, the projector reverses the image so you can project from beh ind a translucent screen. Rear-Ceiling • When you select th is function, the projector reverses and inverts the image at same time. You can project from behind a translucent screen with ceiling mounted projection. Front-Ceiling • When you select this function, the projector inverts the image for ceiling-mounted projection. Use this function to choose your desired aspect ratio. Auto: Keep the image with original width-higth ratio and maxi mize the image to fit native horizontal or vertical pixels. 4:3: The image will be scaled to fit the screen and displayed using a 4:3 ratio. 16:9: The image will be scaled to fit the width of the screen and the height adjusted to display the image using a 16:10 ratio. Adjust image distortion caused by tilting projection. (±40 degrees) The Manual Keystone funcion is unavailable under Auto Keystone setting to “On ” . Press to move the image left. Press to to move the image right. Press < to move the image down. Press to move the image up. " Frequency" changes the projector's refresh rate to match the frequency of your computer's graphics card. If you can see a vertical flickering bar in the projected image, use th is function to make the necessary adjustments. ****** Page 31 ****** Tracking Sharpeness 21 Synchron izes the signal tim ing of the projector with the graphics card. If you experience an unstable or flickering image, use this function to correct it. Adjusts the sharpness of the image. Press < to decrease the sharpness. Press to increase the sharpness. HDMI Color Range Adjust the color range of the HDMI image data to correct color display error. Auto: Automatically adjust by information from player. Limited Range: Prosess the input image as limited color range data. Full Range: Prosess the input image as full color range data. HDMI Scan Info Adjust the overscan ratio of the HDMI image on screen. Auto: Automatically adjust by information from player. Underscan: Always no overscan on HDMI image. Overscan: Always keep overscan on HDMI image. Note: "H. Position "V. Position "Frequency" and "Tracking" functions are not supported under HDMI or Video mode. Note: "Sharpness" functions is not supported under HDMI and Computer mode. Note: "HDMI Color Range" and "HDMI Scan Info" functions are only supported under HDMI mode. ****** Page 32 ****** 22 Setting Menu Location Startup Screen Screen Capture Screen Capture gttoeti Please Wait Closed Caption Setting Ptesg Choose the menu location on the display screen. Use this function to select your desired startup screen. If you change the setting, the changes will take effect when you exit the OSD menu. • Acer: The defau It startup screen of your Acer projector. • User: Use memorize picture from " Screen Capture" function. Use this function to custom ize the startup screen. To capture the image that you want to use as the startup screen, follow the instructions below. Notice: Before proceeding with the following steps, make sure that the Keystone" is set to the defau It value 0 and the aspect ratio is set to 4:3. For details, refer to the " Image" section. • • • • • • Change the "Startup Screen " from the default setting "Acer" to " User" Press "Screen Capture" to customize the startup screen. A dialog box appears to confirm the action. Choose "Yes" to use the current image as your customized startup screen. The capture range is the red rectangular area. Choose " No" to cancel the screen capture and exit the onscreen display (OSD) A message appears, stating that the screen capture is in progress. When the screen capture is finished, the message disappears and the original display is shown. The customized startup screen, as shown below, takes effect when there is a new input signal or when you restart the projector. Selects a preferred closed captioning mode from CCI, CC2, CC3, CC4, (CCI displays captions in the primary language in your area). Select "Off" to turn off the caption ing feature. This function is only available when a composite video or S-Video input signal is selected and its system format is NTSC. Set your screen aspect ratio to 4:3. This function is not available when the aspect ratio is ” 16:9″ or “Auto” . Note: This screen capture function is lim ited by 4:3 aspect ratio on ly. Note: For XGA models, to get best quality for you desired image, suggest end-user set PC resolution to 1024 x 768 before you use this function. Note: For WXGA models, to get best quality for you desired image, suggest end-user set PC resolution to 1280 x 800 before you use th is function.

****** Page 33 ****** Reset Security set Password 23 Press the button and choose “Yes” to return the parameters on all menus to the factory default settings. Security This projector provides a useful security function for the adm inistrator to manage usage of the projector . Press to change the ” Security” setting. If the security function is enabled, your must enter the “Administrator Password” first before changing the security settings. Select “On ” to enable the security function. The user has to enter a password to operate the projector. Please refer to the “User Password” section for details. If “Off” is selected, then the user can turn on the projector without password. Timeout(Min.) Once “Security” is activated to “On ” , the administrator can set timeout function. Press < or to select the timeout interval. The range is from 10 minute to 990 minutes. When the time is up, the projector will prompt the user to enter the password again. The factory default setting of "Timeout(Min.)" is "Off". Once the security function is enabled, the projector will request user to enter password when switch on the projector . Both " User Password" and "Administrator Password" can be accepted for this dialogue. User password Press to setup or change the " User Password". Press number keys to set your password on the remote control and press "MENU" to confirm. Press Aspect Ratio” and try different settings. If possible, reposition the projector so that it is centered on the screen. Press the “Keystone ” on the OSD or the remote control until the sides are vertical. Select “Image –> Projection” on the OSD and adjust the projection direction. Problems with the Projector Condition The projector stops responding to all controls Solution If possible, turn off the projector, then unplug the power cord and wait at least 30 seconds before reconnecting power.

****** Page 41 ****** OSD Messages Condition Message 31 Message Reminder Fan Fail – the system fan is not working Fan Fail Will automatically turn off soon Projector Overheated – the projector has exceeded its recommended operating temperature and must be allowed to cool down before it may be used. Projector Overheated, Will automatically turn off soon

****** Page 42 ****** 32 LED & Alarm Definition Listing LED Messages Message Power Plug Standby Power button ON Lamp retry Cool ing state Power button OFF: Cooling completed; Standby Mode Firmware Down load Thermistor error (T2700C) (Laser light source over temperature), OSD shows “Projector Overheated Fan lock error OSD shows red “Fan Fail, Will automatically turn off soon” Lamp error (Lamp, ballast) Phosphor Wheel error Lamp_LED Red Flash ON to OFF IOOms ON ON 0.5 second H(ON), 0.5 second L(OFF) flashing Temp_LED Red Flash ON to OFF IOOms ON ON 0.5 second H(On), 0.5 second L(Off) flash ing Power LED Red Flash ON to OFF IOOms ON 0.5 second H(ON), 0.5 second L(OFF) flashing ON ON Power LED Blue ON 0.5 second H(On), 0.5 second L(Off) flashing ON ON ON ON

****** Page 43 ****** 33 Ceiling Mount Installation If you wish to install the projector using a ceiling mount, please refer to the steps below: 1 2 Drill four holes into a solid, structurally sound part of the ceiling, and secure the mount base. Note: Screws are not included. Please obtain the appropriate screws for your type of ceiling. Secure the ceiling rod using the appropriate type of four-cylinder screws. Short Rod Screw Type A 50 mm length / 8 mm diameter a o o Ceiling Mount Base – Attach to ceiling Long Rod Extension Rod Long Cylinder Cap Allen Key • For tightening/looseni Tightening Screw Medium Rod

****** Page 44 ****** 34 3 Use the appropriate number of screws for the projector size to attach the projector to the ceiling mount bracket. Smaller Washer Large Washer Projector Bracket Supports projector and allows – for adjustments To Screw Type B Spacer – For heat dissipation 4 Note: It is recommended that you keep a reasonable space between the bracket and the projector to allow for proper heat distribution. Use two washers for extra support, if deemed necessary. Attach the ceiling bracket to the ceiling rod. O 0 Screw Type A 50 mm length /8 mm diameter Large cylinder cap Allen Key – For tightening/loosening Tightening Screw

****** Page 45 ****** 5 35 Adjust the angle and positioning as necessary. O Tightening Screw Allen Key 360′ Allen Key Tightening Screw Note: The appropriate type of screw and washer for each model is listed in the table below. 3 mm diameter screws are enclosed in the screw pack. Models K520/H 112/PH-X01 Screw Type B Washer Type Diameter (mm) 3 o Length (mm) 25 110.00 mm Large Small SCREW SPEC. M3 x 25 mm 0′ 55.00 mm

****** Page 46 ****** 36 Specifications The specifications listed below are subject to change without notice. For final specs, please refer to Acer’s published marketing specifications. Projection system Resolution Computer compatibility Video compatibility Aspect ratio Displayable colors Projection lens Projection screen size (diagonal) Projection distance Throw ratio Horizontal scan rate Vertical refresh scan rate Keystone correction Weight Dimensions (W x D x H) Power supply Power consumption Operating temperature 1/0 connectors DLP@ XGA (1024 x 768) IBM PC and compatibles, Apple Macintosh, iMac and VESA standards: SXGA, XGA, SVGA, VGA, WXGA NTSC (3.58/4.43), PAL (B/D/G/H/I/M/N), SECAM (B/D/G/ K/KI/L), HDTV (720p, 1080i, 1080p), EDTV (480p, 576p), SDTV (480i, 576i) Auto, 4:3, 16:9 1.07 billion colors F = 2.41 -2.55, f – 21.79 mm 23.99 mm, 1:1.1 Manual Zoom and Manual Focus 27″ (70 cm) 300″ (762 cm) 3.9′ (1.2 m) 39.0′ (11.9 m) m (1.95 2.15:1) 30k- 100 kHz 50 – 120 Hz +/- 40 degrees 3.95 Kg (8.71 lbs) 321 mm x 231 mm x 87 mm (12.64″ x 9.09″ x 3.43″) AC 100 – 240 V, 50-60 Hz Normal mode: 197 W +1- 10% @ 110 Vac (Bright mode @ full power) ECO mode: 158 @ 110 Vac (Video mode @ eco power) Standby < 0.5 W 50C to 350C / 4 IOF to 950F Power socket xl RS232 xl Composite input xl S-Video xl VGA input xl HDMI xl USB xl: for firmware upgrade Audio input xl Audio output x 1 ****** Page 47 ****** Standard package contents 37 AC power cord xl VGA cable xl Composite video cable xl Remote control xl Battery x 2 (for remote control) User's Gu ide (CD-ROM) xl (for projector function) Qu ick start guide xl Carrying case xl * Design and specifications are subject to change without notice. ****** Page 48 ****** 38 Compatibility modes A. VGA Analog 1 VGA Analog – PC Signal Modes VGA SVGA XGA SXGA QuadVGA UXGA PowerBook G4 PowerBook G4 PowerBook G4 PowerBook G4 PowerBook G4 PowerBook G4 i Mac DV (G3) Resolution 640×480 640×480 640×480 640×480 640×480 800×600 800×600 800×600 800×600 800×600 800×600 1024×768 1024×768 1024×768 1024×768 1024×768 1152×864 1152×864 1 152×864 1280×1024 1280×1024 1280K 1024 1280×1024 1280×960 1280×960 1600K 1200 640×480 640×480 800×600 1024×768 1152×870 1280×960 1024×768 V.Frequency [Hz] 60 72 75 85 119.51 56 60 72 75 85 119.85 60 70 75 85 119.804 70 75 85 60 72 75 85 60 75 60 60 66.6 (67) 60 60 75 75 75 H.Frequency [KHz] 31.5 37.9 37.5 43.3 61.0 35.1 37.9 48.1 46.9 53.7 77.20 48.4 56.5 60.0 68.7 98.80 63.8 67.5 77.1 64.0 77 .o 80.0 91.1 60.0 75.2 75.0 31.4 34.9 37.9 48.4 68.7 75.0 60.0 ****** Page 49 ****** 2 3 1 VGA Analog – Extended Wide timing Modes WXGA WSXGA+ VGA Analog Modes 480i 576i 480p 576p 720p nop 1080i 1080i 1080p 1080p 1080p Resolution 1280×768 1280×768 1280×768 1280×720 1280×800 1440×900 1680×1050 1366×768 V.Frequency [Hz] 1920×1080-RB 1920×1080-ElA 1024×600 x (Red uced Blanking Timing 1366×768 Component Signal 60 75 85 60 60 60 60 60 60 60 60 60 60 B. HDMI Digital HDMI PC Signal Modes VGA Resolution 720×576 720×480 720×576 1280×720 1280×720 1920×1080 1920×1080 1920K 1080 1920×1080 1920K 1080 Resolution 640×480 640×480 640×480 640×480 640×480 V.Frequency [Hz] 59.94(29.97) 50(25) 59.94 50 60 50 60 (30) 50 (25) 23.97/24 60 50 V.Frequency [Hz] 60 72 75 85 119.51 39 H.Frequency [KHz] 47.8 60.3 68.6 44.8 49.6 59.9 65.3 47.7 66.60 66.60 37.3 66.6 47.7 H.Frequency [KHz] 15.7 15.6 31.5 31.3 45.0 37.5 33.8 28.1 27.0 67.5 56.3 H.Frequency [KHzJ 31.5 37.9 37.5 43.3 61.61 ****** Page 50 ****** 40 2 SVGA XGA SXGA QuadVGA PowerBook G4 PowerBook G4 PowerBook G4 PowerBook G4 PowerBook G4 PowerBook G4 i Mac DV (G3) 800×600 800×600 800×600 800×600 800×600 800×600 1024×768 1024×768 1024×768 1024×768 1152×864 1152×864 1280×1024 1280K 1024 1280×1024 1280×1024 1280×960 640×480 640×480 800×600 1024×768 1152×870 1280×960 1024×768 HDMI Extended Wide timing Modes WXGA WSXGA+ Resolution 1280×768 1280×768 1280×768 1280×720 1280×800 1440×900 1680×1050 1366×768 1024×600 56 60 72 75 85 119.85 60 70 75 1 19.804 75 85 60 72 75 85 75 60 66.6 (67) 60 60 75 75 75 V.Frequency [Hz] 60 75 85 60 60 60 60 60 60 37.9 46.9 77.20 48.4 56.5 60.0 98.80 67.5 64.0 77.0 80.0 91.1 75.2 31.4 34.9 37.9 48.4 68.7 75.0 60.0 H.Frequency [KHz] 47.8 60.3 68.6 44.8 49.6 59.9 65.3 47.7 37.3 ****** Page 51 ****** 3 HDMI Video Signal Modes 480i 576i 480p 576p 720p 720p 1080i 1080i 1080p Grap IC source monitor range limits Resolution 720×480(1440×480) 720×576(1440×576) 720×480 720×576 1280×720 1280×720 1920×1080 1920×1080 1920×1080 Horizontal scan rate: Vertical scan rate: Max. pixel rate V.Frequency [Hzl 59.94 (29.97) 50 (25) 59.94 50 60 50 60 (30) 50 (25) 23.97/24 30k-100kHz 50-120Hz 165MHz 41 H.Frequency [KHz] 15.7 15.6 31.5 31.3 45.0 37.5 33.8 28.1 27.0 ****** Page 52 ****** 42 Regulations and safety notices FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the device and receiver. Connect the device into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/television technician for help Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. Notice: Peripheral devices Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached to this equipment. Operation with non-certified peripherals is likely to result in interference to radio and TV reception. Caution Changes or modifications not expressly approved by the manufacturer could void the user's authority, which is granted by the Federal Communications Commission, to operate this device. Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Notice: Canadian users This Class B digital apparatus complies with Canadian ICES-003. ****** Page 53 ****** 43 Remarque Ilintention des utilisateurs canadiens Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada. Declaration of Conformity for EU countries Acer hereby declares that this projector series is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Compliant with Russian regulatory certification ME61 UA.TR 002 Radio device regulatory notice Note: The regulatory information below is for models with wireless LAN and/or Bluetooth only. General This product complies with the radio frequency and safety standards of any country or region in which it has been approved for wireless use. Depending on configurations, this product may or may not contain wireless radio devices (such as wireless LAN and/or Bluetooth modules). Canada — Low-power license-exempt radio communication devices (RSS-210) a b Common information Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. Operation in 2.4 GHz band To prevent radio interference to the licensed service, this device is intended to be operated indoors and installation outdoors is subject to licensing. List of applicable countries Th is device must be used in strict accordance with the regu lations and constraints in the country of use. For further information, please contact the local office in the country of use. Please see ec.europa.eu/enterprise/rtte/implem.htm for the latest country list. ****** Page 54 ****** Laser regulation CLASS 1 LASER PRCH)UCT Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007. IEC 60825-1:2007 Important ! Laser Precautions This projector is a Class 1 laser device that conforms with IEC 60825-1:2007. This projector has built-in laser module. Disassembly or modification is very dangerous and should never be attempted Any operation or adjustment not specifically instructed by the user's guide creates the risk of hazardous laser radiation exposure. ****** Page 55 ****** Acer Incorporated 8F, 88, Sec. 1. Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan Declaration of Conformity we, Acer Incorporated 8F, 88, Sec. I, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan Contact Person: Mr. RU Jan, Acer Italy s.r.l Via Lepetit, 40, 20020 Lainate (MI) Italy Tel: +39-02-939-921, Fax: +39-02 9399-2913, acer.it Hereby declare that: Product: Trade Name: Model Number: Machine Type: Projector Acer CNX1114 K520/H112/PH-X01 Is compliant with the essential requirements and other relevant provisions of the following EC directives, and that all thc necessary steps have taken and are in force to assure that production units of the same product will continue comply with the requirements. EMC Directive 2004/108/EC as attested by conformity with the following harmonized standards: EN55022, AS/NZS CISPR22, Class B EN55024 EN61000-3-2 Class A EN61000-3-3 Low Voltage Directive 2006/95/EC as attested by conformity with thc following harmonized standard: – EN60950-1 RoHS Directive 2002/95/EC on the Restriction of thc Use of certain Hazardous Substances in Electrical and Electronic Equipment – The maximum concentration values of the restricted substances by weight in homogenous material are: Lead Mer 0.1% Hexavalent Chromium O. I % Polybrominated Biphenyls (PBB's) POI brominated Di hen I Ethers BDE's Cadmium 0.1% 0.01% Directive 2009/125/EC with regard to establishing a framework for the setting of ccodcsign requirements for encrky-rclated product. ****** Page 56 ****** Acer Incorporated 8F, 88, Sec. 1. Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan The standards listed below are applied to the product if built with WLAN module or wireless keyboard and mouse. ceo R&TTE Directive 1999/5/EC as attested by conformity with the following harmonizæd standard: • Article 3.1(a) Health and Safety . EN60950-l – EN62311 e Article 3.10) EMC EN301 489-1 -r EN301 489-17 Article 3.2 Spectrum Usages EN300 328 -. EN301 893 (Applicable to 5GIlz high performance RLAN). Year to begin affixing CE marking 2012. r. anager Regulation Center, Acer Inc. Mar. 30 2012 ate ****** Page 57 ****** acer Acer America Corporation 333 West San Carlos St., San Jose CA 951 10, U. S. A. Tel : 254-298-4000 Fax 254-298-4147 acer.com Federal Communications Commission Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The following local Manufacturer / Importer is responsible for this declaration: Product: Model Number: Machine Type: Name of Responsible Party: Addrcss of R(sponsible Party: Contact Person: Phone No.: Fax No.: DLP Projector CNXI 114 Acer America Corporation 333 West San Carlos St. San Jose, CA 95110 Acer Representative 254-298-4000 254-298-4147


FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE – USER MANUAL

OWNER GUIDE – OWNER MANUAL

REFERENCE GUIDE – REFERENCE MANUAL

INSTRUCTION GUIDE – INSTRUCTION MANUAL

ACER H112 (01) PDF MANUAL

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.