Post questions, comments, reviews or page errors in the comment box below.

Click here to download ACER ED273 (02) PDF MANUAL

PDF Content Summary:

****** Page 1 ****** Acer LCD Monitor Quick Start Guide (QSG) Important safety instructions Please read the following instructions carefully. 1 2. 3. 4. 5. 6. To clean the LCD monitor screen: Be sure that your monitor is electrically rated to operate with theAC power available in your location. • Turn off the LCD monitor and unplug the power cord • Spray a non-solvent cleaning solution onto a rag and clean the screen gently. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage it. Do not apply pressure to the LCD screem Excessive pressure may cause permanent damage to the display. Do not remove the cover or attempt to service this unit yourself. An authorized technician should pelform servicing of any nature. Store the LCD monitor in a room with a temperature of -200 to 600C (-40 to 1400F). Storing the LCD monitor outside this range may result in permanent damage. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur: • Monitor-to-PC signal cable is frayed or damaged. • Liquid spills onto the LCD monitor or the monitor is exposed to raim • The LCD monitor or case is damaged. Package contents Audio cable LCD monitor Power cord (Optional) Attaching the monitor to the base VGA cable (Optional) DVI cable (Optional) HDMI cable (Optional) Quick start guide Adapter 1. Take out the monitor, stand and base from the package, put them on smooth surface. 2. Align the stand for the back cover portion of the monitor, insat the back cover, ensure that the monitor and.standconnection is stable, do not shake. 3. Align base and insert the base to stand, rotating hand screw until tightening, fix the base. Connecting Your Monitor to a Computer 1 Turn offyour monitor and unplug your computer’s power cord. 2. 2-1 Connect the video cable a. Make sure both the monitor and computer are switched off. b. Connect the VGA video cable to the computer. 2-2 DVI Cable (Optional, only Dual-I nput Model) a. Make sure both the monitor and computer are powered-OFF. b. Connect the DVI cable to the computer. 2-3 HDMI Cable (OptionaL only HDMI-lnput Model) a. Make sure both the monitor and computer are powered-OFF. b. Connect the HDMI cable to the computer. 3. Connect the Audio Cable. (Only Audio-lnput Model) (Optional) 4. Insert the monitor power cable into the power portat the backofthe monitor 5. Plug the power cords of your computer and your monitor into a nearby electrical outlet. External Controls Adapter No. 112 5 6 Icon ME-Nu AUTO AL”i’O Item Power button/ indicator Minus / plus OSD functions Description Turns the monitor on/off Blue indicates power on. Amber indicates standby/power saving mode. If the OSD is active, press the Minus or Plus button to toggle between the OSD options. Press to view the OSD. Press again to enter a selection in the OSD- If the OSD is active, press Auto to exit the OSD. Once the OSD is inactive, Auto adjust button / press Auto and the monitor will automatically optimize the display position, exit focus, and clock of your display. LCD Monitor Quick Setup Guide

****** Page 2 ****** Regulations and safety notices FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 1 5 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. • Increase the separation between the device and receiver. Connect the device into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/television technician for help. CE declaration of Conformity Hereby, Acer Inc., declares that this LCD monitor is in compliance with the essential requirements and other relevant provisions of EMC Directive 2014/30/EIJ, Low Voltage Directive 2014/35/EU, and RoHS Directive 2011/65/ EU and Directive 2009/125/EC with regard to establishing a framework for the setting of ecodesign requirements for energy-related product. Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with EMC regulations. Notice: Peripheral devices Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached to this equipment. Operation with non-certified peripherals is likely to result in interference to radio and reception. Caution Changes or modifications not expressly approved by the manufacturer could void the user authority, which is granted by the Federal Communications Commission, to operate this product. Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1 ) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Notice: Canadian users This Class B digital apparatus complies with Canadian ICES-003. Remarque l’intention des utilisateurs canadiens Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada. Disposal of Waste Equipment by Users in Private Household in the European Union This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product. In order to prevent damage to the monitor, do not lift the monitor by its base. LCD Monitor Quick Setup Guide








Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.