Post questions, comments, reviews or page errors in the comment box below.

Click here to download ACCESS LIGHTING 29010LEDDLP (01) PDF MANUAL

PDF Content Summary:

****** Page 1 ****** CERTIFICATION: cULus DRY access INSTALLATION INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS MESURES DE SECURITE A RESPECTURE Before assembling your ACCESS LIGHTING fixture, please make sure that you carefully read through this instruction sheet. Save this instruction sheet and refer to it when additions to or changes in the fixture configuration are made. Lisez attentivement ce manuel d’instructions. Enregistrer cette feuille d’instructions et de sty référer lorsque les aiouts ou changements dans Ia configuration de montage sont faites. CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR. CONSULTER UN ELECTRICIEN QUALIFIE POUR VOUS ASSURER QUE LES CONDUCTEURS DE LA DERIVATION SONT ADEQUATS THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED. CE PRODUIT DOIT ETRE INSTALLE SELON LE CODE D’INSTALLATION PERTINENT, PAR UNE PERSONNE QUI CONNAIT BIEN LE PRODI-JIT ET SON FONCTIONNEMENT AINSI OUE LES RISQUES INHERE-NTS NOTE: The important safeguards and instructions that appear in this manual are not meant to cover all possible conditions and situations that may OCCUr. It must be understood that common sense, caution and care, are factors that can’t be built into any product. These factors must be supplied by the person(s) caring for and operating the fixture. Read all instructions Do not install this fixture in hazardous locations. Nfinstallez pas cet appareil dans des emplacements dangereux. Do not install any fixture assembly closer than 6 inches from any curtain or similar combustible material. Laisser une distance d’au moins 6 POUCes entre ce luminaire et Ia toute surface combustible. “WARNING Risk of Fire and Electric Shock.” “CAUTION: Risque d’ Incendie et de Choc Electriques.” GENERAL INFORMATION All electrical connections must be in accordance with all ordinances, Local and the U.S. National Electrical Codes (NEC). These fixtures are intended for mounting to a standard 4″ metal octagon outlet box. The box must be directly supported by the building structure and U.L. Recognized. COLLECTION I-Biza WHAT WE PROVIDE APPLICATION Pendant Fixture NO. 2901 OLEDDLP MODEL NO. 2901 OLEDDLP • Mounting bracket Mounting Hardware 2 x Glass Shades I x A19 E-26 LED Bulb WHAT YOU NEED • Screwdriver • Wire Cutters • Wiring Supplies as Specified by Electrical Code Recommended Dimmers for Supplied LED Bulb (ELV) LUTRON Skylark SELV-300P (MLV) COOPER Aspire 9530SW (TRIAC) LEGRAND Titan CD703-PW STEP BY STEP INSTRUCTIONS Before starting your installation disconnect the Power by turning off the Circuit Breaker or by removing the fuse at the fuse box. Just turning the light off at the light switch is not sufficient to prevent electrical shock.

****** Page 2 ****** CERTIFICATION: cULus DRY 1 1 NO. 2901 OLEDDLP ATTACH MOUNTING BRACKET AND MAKE WIRE CONNECTION If there is an existing fixture remove it. Expose the supply wires from the J-box. Attach the mounting bracket to the J-box with the supplied screws. Gently pull the supply wires through the hole in the mounting bracket. Connect the black supply wire to the black fixture wire. Secure with the supplied wire not. Connect the white supply wire to the white fixture wire. Secure with the supplied wire nut. Attach the green J-Box wire around green hexagonal head screw or connect it to the green supply grounding wire of the fixture. Secure all wires with electrical tape (not supplied). Tuck all wires carefully into the J-Box. ATTACH THE CANOPY Hold the canopy up to the mounting bracket and secure with the supplied screws. INSTALL GLASS SHADES AND INSERT THE BULB Align the outer and inner glass shade fittings onto the socket and secure with the supplied socket ring. Insert the bulb . DO NOT EXCEED THE MAXIMUM WATTAGE AS STATED ON THE WARNING LABEL RESTORE THE ELECTRICITY AND CHECK THE OPERATION OF YOUR NEW ACCESS LIGHTING FIXTURE Please ensure that the fitting is cool and CAUTION switched off before replacing the bulb. DO NOT use bulbs that might exceed the maximum wattage, stated on caution label VER: 20.01.1








Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.