Post questions, comments, reviews or page errors in the comment box below.

Click here to download 100 PERCENT MPUW1801 (01) PDF MANUAL

PDF Content Summary:

****** Page 1 ****** In the Box ooo PERCENT HOMEOLINK Toggle Wi-Fi Socket Model: MPUWI 801 PRODUCT GUIDE CAUTIO I. Read the instructions. All uses guidelines must be read before start device. 2. Keep the instructions for future use. 3. Attention, use and security guidelines must be respected. 4. The device must not be used near water or be put in contact with moisture. 5, Make sure has no liquid is spilled on device and device openings. 6. Move device carefully, avoid shocks. 7. Do not block the breakdown of the device outputs. 84 Do not place the device near from a heat source (e.g. radiator). Do not expose it to the sun. 9. Plug the device as indicate on this information form. 10. This device has a connection with overload protection (security device). If the replacement of decision-making is required, please to experience or the device manufacturer technician for repairing. 11. For cleaning the device, please follow the recommendations of the notice. 12. The apparatus should be unplugged if a long period out of use. 13. Device shall be repaired by a qualified person when: a. device was exposes to the rain, bv device does not work correctly without notable exterior change, 14. The user shall not try to maintain device beyond that which is described in this information form. The guarantee would negate. 15. MAINS plug is used as the disconnect device and shall remain readily operable and easily accessible. 16. To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. Wi-Fi Socket QR Code Card Additional Warnings Pairing Button NOTE: This image is not the QR code for your product READ CAREFULLY AND KEEP THIS MANUAL Caution: Any changes or modifications not expressly approved could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1 ) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undersired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rulese These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver: • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radi0/TV technician for help. Getting Started This product works together with your iOS or Android mobile device and internet via Wi-Fi. Make sure your mobile device’s system software is up to date. Please also check that your Wi-Fi router is working properly and that the Wi-Fi network you are connected to is a 2.4 GHz channel with WPA/WPA2 encryption. The socket only vm on a 2i4GHz I’WF’ cmnectÅcos NOT a 5GHz annectkY1 24GHz ts the standard fcy most routers, 5GHz amnectons typecal?y have “5G” arpended to the end of the router’s netv.ork name, App Store Goo* Play Installing the App 1. Search HomeLink by 100 Percent on the Apple App Store (for iOS devices) or the Google Play Store (for Android devices). Accept any terms and conditions and install. 2. Launch the HomeLink app and select “Sign Up” if you do not already have an account. 3. Input an email address and a 6 – 20 character password. An activation email will be sent to your email account to complete the sign up process. Legal Information 90 Days Limited Warranty In unlikely event that this product is defective, or does not $*rform properly, you may within ninety (90) days from your original date of purchase return it to the authorized service center for repair or exchange. TO OBTAIN WARRANTY SERVICE: • Call the Customer Support number located below, go to our website portal to receive an SRO n umben • Provide proof of the date of purchase within the package (dated bill of sale). • Prepay all shipping costs to the authorized service center. and rernember to insure your return. • Include a return shipping address {no PO Boxes), a contact number, and the defective unit within the package. • the defect or reason you are returning the product. Your product will be repaired or replaced, at our option, for the sarne or similar model Of equal value if examination by the service center determines this product is defective. Products received damaged as a result of shipping will require you to file a claim with the carrier. The shipping address of the authorized service center is: Customer Service Dept. 36 CIO Southern Telecom 400 Kennedy Drive Sayreville NJ 08872 Should you have any questions or problems concerning this product. please contact our customer service department at: Customer Support: Phone: 107-768-8481 Monday- Friday BAM – IOPM (EST) A Click on-Product Support” Using the Socket To view the in-app user guide in the HomeLink app tap the A icon and select “User Guide” on the sidebar menu. The in-app user guide will explain how to use the app itself, whereas this user guide focuses on setting up the device and the HomeLink app. Setting Up the Socket 1. Plug the Wi-Fi socket into a wall outlet. Turn on the switch of your outlet if it has one. When powered on, it will beep twice. 2. Connect your mobile device to a Wi-Fi network. Connecting to the HomeLink App 1. Once connected to your Wi-Fi network, open the HomeLink app, select the “+” icon in the Socket section on the main page of the app. When ready, tap the “Start” button. 2. Input your Wi-Fi network’s password (if any) and tap the “Scan QR Code” section at the bottom of the screen and scan the QR code on the socket or on the QR code card. 3. Plug the socket in and long press the button on the Wi-Fi socket until a beep is heard to enter pairing mode. Tap the Pairing button on the screen and wait for the socket to pair. If successful, 1 long beep and 2 short beeps will be heard and the LED indicator will turn solid BLUE. Limited Warranty Warranty service not provided This warranty does not cover damage resulting frtYTi accident. misuse, abuse, improper installation or 0*ration, lack of reasonable care, and unauthorized modification.This warranty is voided in event any unauthorized person opens, alters or repairs this product. All products being returned to the authorized service center for repair must be suitably packaged. Limitation of Warranty: .THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TOTHIS PRODUCT. ALL OTHER WARRANTIES EXPRESS OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY DISCLAIMED NO VERBAL OR WRITTEN INFORMATION GIVEN BY AIT, INC. ITS AGENTS, OR EMPLOYEES SHALL CREATE A GUARANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY. • REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. AIT, INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. THIS DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY ARE GOVERNED BY THE LAWS OF THE STATE OF NEW YORK. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTIBIUTY OR FITNESS FOR A PARTICULAR m-JRPOSE ON THIS PRODUCT IS LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE. Sonte states do allow exclusion nor of incidental or consequential damages, or lirnatiorts on how long an implied warranty lasts so the above limitations on exclusions rnay not apply to you. This warranty gives you specific legal rights. and you also may have other rights that vary from state to state. Using the Socket (contd) Connecting to the HomeLink App (cont’d) Ifthe pairing attempt times out, 1 long beep and 3 short beeps will be heard and “Pairing Time Out” will be displayed in the app while the LED indicator continues to flash BLUE. To attempt to pair again, you will need to repeat the Connecting to the HomeLink App section. Connecting to Amazon Alexa 1 . After your device has been successfully paired to the socket, open the Alexa app and go to the “Skill” page, then search “HomeLink.” 2. Once found, press the details of the HomeLink skill page and select “Enable Skill.” 3. Fill in the username and password for your HomeLink account that you previously set up. After a successful login, go back to the Skill page and select “Discover Devices.” 4. When Alexa responds “Discovery Finished,” the socket will be recognized. You can use Alexa to turn the socket ON/OFF. ooo- PERCENT








Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.