FREE ENGLISH ZOTOC ZBOX MAGNUS ONE (01) PDF DOCUMENT.
FREE ENGLISH ZOTOC ZBOX MAGNUS ONE (01) PDF USER GUIDE.
FREE ENGLISH ZOTOC ZBOX MAGNUS ONE (01) PDF USER MANUAL.
FREE ENGLISH ZOTOC ZBOX MAGNUS ONE (01) PDF OWNER GUIDE.
FREE ENGLISH ZOTOC ZBOX MAGNUS ONE (01) PDF OWNER MANUAL.
FREE ENGLISH ZOTOC ZBOX MAGNUS ONE (01) PDF REFERENCE GUIDE.
FREE ENGLISH ZOTOC ZBOX MAGNUS ONE (01) PDF INSTRUCTION GUIDE.
FREE ENGLISH ZOTOC ZBOX MAGNUS ONE (01) PDF REFERENCE MANUAL.
FREE ENGLISH ZOTOC ZBOX MAGNUS ONE (01) PDF INSTRUCTION MANUAL.
FREE ENGLISH ZOTOC ZBOX MAGNUS ONE (01) PDF OPERATING INSTRUCTIONS.
CLICK HERE TO DOWNLOAD ZOTOC ZBOX MAGNUS ONE (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What is included in the package contents?
The package contains the following items:
• 1 x ZOTAC ZBOX
• 1 x Power Cord
• 2 x Nylon Cable Tie (optional)
• 1 x Warranty Card
• 1 x Quick Start Guide
• 1 x USB flash drive with Windows drivers
• 2 x Antenna
How do I open the ZOTAC ZBOX case for customization?
1. Lay the ZOTAC ZBOX on a flat surface.
2. Locate the two thumb screws and remove them.
3. Press down on the arrow of the top cover and remove the top cover off the ZOTAC ZBOX in the direction of the arrow.
4. Push up and remove the two side covers.
How do I install an optional graphics card?
1. Remove the screw from the bracket.
2. Insert the graphics card into the available PCIe slot.
3. Install the screw to secure the graphics card.
4. Connect the power cable to the graphics card.
How do I install memory modules?
1. Lay the ZOTAC ZBOX on a flat surface with the right side upwards.
2. Gently push down on the memory retainer clips to the open position.
3. Insert a SO-DIMM memory module into the slot.
4. Gently push the SO-DIMM memory module down into the slot until the retainer clips lock into place.
How do I install an M.2 SSD module?
1. Remove the screw securing the hard disk bracket.
2. Remove the hard disk bracket.
3. Locate the M.2 SSD slot and remove the screw from the screw bolt.
4. Attach the screw to the M.2 SSD module.
5. Insert the M.2 SSD module into the slot at a 45-degree angle.
6. Gently press down on the M.2 SSD module, and install the screw.
How do I install a 2.5-inch hard disk or SSD?
1. Locate the 2.5-inch SATA hard disk/SSD and the hard disk bracket.
2. Install the hard disk/SSD to the hard disk bracket.
3. Insert the hard disk bracket into the SATA slot.
4. Reinstall the thumb screw.
How do I set up my ZOTAC ZBOX for use?
1. Connect antennas for WiFi.
2. Connect to home networks.
3. Connect USB 3.2 devices.
4. Connect USB 3.0 devices.
5. Connect HDMI displays.
6. Connect Thunderbolt devices.
7. Connect DP displays.
8. Connect power cable.
9. Turn on the system.
CLICK HERE TO DOWNLOAD ZOTOC ZBOX MAGNUS ONE (01) PDF DOCUMENT