XODO E4 (01) PDF MANUAL

XODO E4 (01) PDF SUMMARY:

What do I do before installing or using the Xodo Smart Home Kit?

Read the user manual and keep it for future reference.

---

How do I download and install the Xodo Smart App?

The app can be found by searching “Xodo Smart” by Contixo Inc. in the App Store (for IOS) or Google Play Store (for Android).

---

How do I register and login to the Xodo Smart App?

1. Register an account by entering an email address and setting up a profile, or log in with an existing account.
2. Configure the WiFi by choosing a network and providing password credentials. The app supports 2.4 GHz WiFi networks (5 GHz network is not compatible).
3. Additional members can be added later in the Family Settings to allow others to control smart products.

---

How do I add devices manually?

1. Power on the device and confirm the indicator light is blinking rapidly (Hold the reset button for 5 seconds).
2. Once confirmed that the smart device is ready, press the “Confirm indicator rapidly blink” button.
3. Continue on to the next step.
   • Pressing the “Help” button will offer some troubleshooting guidelines to follow.

---

What do I do if the light bulb is not flashing?

Try turning the light bulb on and off three times, then leave it on.

---

How do I connect the smart device to a WiFi network?

1. If the proper network is not listed, select the “Change Network” link to see a list of available networks.
2. Enter the password next to the lock icon.
3. Press Confirm to continue.

---

What does the connecting screen show?

The connecting screen will appear and usually register within approximately a 30% range. The device found will checkmark green, then initializing device will complete. After connecting process completes it will continue on toward the next screen.

---

What do I do after the smart device is added and communicating on the same network?

• Rename the smart device by clicking on the pencil icon.
• Specify the location.
• Press the Completed button at the bottom of the screen to continue to the next step.

---

How do I control the lighting in White Mode?

• Brightness controls the brightness.
• Color Temp allows the light to take different moods.

---

How do I control the lighting in Color Mode?

• Saturation will give more brilliance to the lighting.
• Bright will allow control over light intensity.

---

What is Scene Mode for?

Scene Mode allows additional controls for preset lighting. Each light mode will provide different lighting effects to choose from.

---

How do I add schedules for the smart light?

• Program times to turn the bulb on or off.
• Set the recurrence of the schedule.

---

How do I configure the “Left Time”?

1. Click “Left Time”.
2. Select the switch that needs to be set.
3. First configure the hours (left).
4. Next configure minutes (right).
5. Click “OK” to save the settings.

---

How do I configure the light bulb settings?

Different features can be adjusted from the menu button on the upper right-hand button “ ” on the APP.

1. Device Name can be changed as desired.
2. Device Location can set the location in your home.
3. Check Device Network allows checking the network connection status.
4. Add Members to be able to control the device in the Share Device setting.
5. Create Group to control other smart devices at the same time.
6. Device Information provide network configuration information.
7. Add to Home Screen allows adding the power strip to the home screen of the smartphone.
8. Firmware Information allows to check software or install updates to the device.
9. Remove device will remove the smart strip from the Xodo Smart app and remove pairing. This is necessary if pairing with a new device.
10. Restore Factory Setting allows to reset the Surge Protector to factory setting.

---

How do I install the Smart WiFi Camera?

1. Rotate the base counterclockwise and take it out.
2. Take the base out and put it where you want to install it.
3. Install the base.
4. Mount the camera on the base and turn it clockwise.

---

How do I add the camera manually?

Select IP Camera to continue.

---

How do I manually detect devices?

1. Power on the device and confirm you hear the “Didi” sound.
2. Once you confirm the smart device is ready, press the “next step” button.
3. Continue on to the next step.
   • Pressing the “Help” button will offer some troubleshooting guidelines to follow.

---

How do I connect the smart device to a WiFi network?

1. If the proper network is not listed on this page, select the “Change Network” link to see a list of available networks.
2. Enter the password next to the lock icon.
3. Press “Confirm” to continue.

---

How do I scan with the camera screens?

1. The pairing process will ask to use the doorbell to scan a QR barcode on the screen.
2. Press “Continue” to begin.
3. The QR barcode will appear on the screen.
4. Hold the doorbell camera in front of the QR barcode until a beep is heard.
5. Press the “Heard the beep” button to continue.
   • Pressing “Heard nothing at all” will provide some trouble shooting steps to help get the doorbell to scan the QR barcode.

---

What does the “Connecting” screen show?

After you hear the beep and continue on, the “Connecting” screen will appear. It will usually register within by approximately 30% range. The Device found will checkmark green, then Initializing device will complete. After connecting process completes it will continue on toward the next screen.

---

What do I do after the smart device is added and communicating on the same network?

• Rename the smart device by clicking on the pencil icon.
• Specify the location.
• Press the “Completed” button at the bottom of the screen to continue to next step.

---

What are the camera home screen controls?

1. Press the “Screenshot” button to take a snapshot.
2. Press the “Speak” button to communicate with people next to the smart doorbell.
3. Press the “Record” button to record video.
4. “Playback” will access stored video from the memory card.
5. Press the “Alarm” button to switch on/off the Motion detection alarm function.
6. “Cloud storage” allows viewing of recorded video in cloud storage.

---

What settings can be adjusted from the menu button on the upper right-hand button on the APP?

1. Device Name can be changed as desired.
2. Add Members to be able to control the device in the Share Device setting.
3. Device Information provide network configuration information.
4. Use Echo provide the information about how to connect your device to Amazon Alexa.
5. Basic function settings can set below functions: Flip Screen: on/off; Talk Mode: One-Way Talk/ Two-Way Talk.
6. Motion detection on/off switch control if the motion sensor is on. Having the motion sensor on will alert the smart device each time there is movement.
7. Memory Card settings will display info regarding the removeable memory module.
8. Firmware Information allows to check software or install updates to device.
9. Remove device will remove the doorbell from the Xodo Smart app and remove pairing. This is necessary if pairing with a new device.

---

How do I add a plug manually?

Select Plug to continue.

---

How do I connect the smart device to a WiFi network?

1. If the proper network is not listed on this page, select the “Change Network” link to see a list of available networks.
2. Enter the password next to the lock icon.
3. Press “Confirm” to continue.

---

What does the “Connecting” screen show?

The “Connecting” screen will appear. It will usually register within by approximately 30% range. The Device found will checkmark green, then Initializing device will complete. After connecting process completes it will continue on toward the next screen.

---

What do I do once the smart device is added and communicating on the same network?

• Rename the smart device by clicking on the pencil icon.
• Specify the location.
• Press the Completed button at the bottom of screen to continue to next step.

---

What are the smart plug home screen controls?

1. Press the “OFF”/”ON” button to turn off/on the smart plug.
2. Press the “Countdown” button to set countdown on or off.
3. Press the “Schedule” button to set a schedule.

---

How does the Countdown function work?

1. Click “Countdown”.
2. Select the switch that needs to be set.
3. First configure the hours (left).
4. Next configure minutes (right).
5. Click “OK” to save the settings.

---

How does the Timer function work?

1. Click on “Alarm”.
2. Select the switch that needs to be set.
3. Click “Add Schedule”.
4. First configure the hours (left).
5. Next configure minutes (middle).
6. Select AM or PM on the right.
7. Click “Repeat” and choose the day of the week.
8. Click “Save” to save the settings.

---

What features can be adjusted from the menu button on the upper right-hand button on the APP?

1. Device Name can be changed as desired.
2. Device Location can set the location of the plug in your home.
3. Supported Third-Party Control provide the information about how to connect your device to Amazon Alexa and Google Assistant.
4. Add Members to be able to control the device in the Share Device setting.
5. Create Group to control other smart devices at the same time.
6. Device Information provide network configuration information.
7. Add to Home Screen allows to add the plug to the home screen of your smartphone.
8. Firmware Information allows to check software or install updates to device.
9. Remove device will remove the smart plug from the Xodo Smart app and remove pairing. This is necessary if pairing with a new device.
10. Restore Factory Setting allows to reset the Surge Protector to factory setting.

---

How can some devices set group control?

1. Click " " in the upper right corner.
2. Click “Create Group”.
3. The page displays all devices with the same model number and available to be added as a group. Select the device and click “Confirm”.

---

How do I add automation?

1. Click “Automation” on the “Smart” page.
2. Click “Add Automation“ or “+” to go to the smart configuration page.
3. Click “Add conditions” or “+” to select trigger condition.
4. Click “Valid Time Period” to set a valid time period for automation.
5. Click “Next” to go to the smart configuration page.
6. Enter the automation name and click “Confirm” to finish.
7. Click the switch in the lower left corner to select to execute or turn off the automation.

---

How do I configure a scene with “Trigger automation?”

1. Click “Scene” on the “Smart” page.
2. Click “Add Scenario“ or “+” to go to the smart settings page.
3. Click “Add action“ or “+” to add set automation or equipment.
4. Click “Save”.
5. Enter the automation name and click “Confirm” to finish.

---

How do I link a Xodo Smart account to Google Home Screen?

1. Open Google Play Store or Apple Store and download Google Home.
2. Open the Google Home app and click on Get Started.
3. Login with a Google Account or create a new account.
4. Use Location access to find devices on the same wifi network.
5. Permission is needed so Google Home can access device.
6. The app will search for devices to connect.
7. A YouTube video is available to help instruct how to use smart devices.
8. The app will show settings to add devices, setup routines, and adjust settings.
9. If the devices are already installed and setup through the Xodo app, the “Works with Google” setup option can be selected to continue.
10. Configure the home settings by adding address and name to a “Home” group.

---

What voice commands can I use to control my smart devices through Google Home?

Taking the bedroom light as an example:

1. Ok Google, turn on/off bedroom light.
2. Ok Google, set bedroom light to 50 percent.
3. Ok Google, brighten bedroom light.
4. Ok Google, dim bedroom light.
5. Ok Google, set bedroom light to red.

---

How do I link a Xodo Smart account to Alexa?

1. Download the free Alexa app from the Amazon Appstore, Google Play, or the Apple App Store.
2. Open the Alexa app to the home screen.
3. In the upper left-hand corner, open the menu.
4. Next, click on “Skills & Games”.
5. At the top of the app, search for “Smart Life”.
6. The Smart Life App will appear.
7. Click Settings.
8. Manage Smart Home Devices to verify Smart Life has been added.
9. You will be redirected to the account link page. Type in your Xodo Smart account and password, and select the country/region where your account belongs.
10. Tap “Link Now” to link your Xodo Smart account. The country/region, the account, and the password must match.