FREE ENGLISH WINE ENTHUSIAST N’FINITY PRO L 237 03 67 04 (01) PDF USER GUIDE
FREE ENGLISH WINE ENTHUSIAST N’FINITY PRO L 237 03 67 04 (01) PDF USER MANUAL
FREE ENGLISH WINE ENTHUSIAST N’FINITY PRO L 237 03 67 04 (01) PDF OWNER GUIDE
FREE ENGLISH WINE ENTHUSIAST N’FINITY PRO L 237 03 67 04 (01) PDF OWNER MANUAL
FREE ENGLISH WINE ENTHUSIAST N’FINITY PRO L 237 03 67 04 (01) PDF REFERENCE GUIDE
FREE ENGLISH WINE ENTHUSIAST N’FINITY PRO L 237 03 67 04 (01) PDF INSTRUCTION GUIDE
FREE ENGLISH WINE ENTHUSIAST N’FINITY PRO L 237 03 67 04 (01) PDF REFERENCE MANUAL
FREE ENGLISH WINE ENTHUSIAST N’FINITY PRO L 237 03 67 04 (01) PDF INSTRUCTION MANUAL
FREE ENGLISH WINE ENTHUSIAST N’FINITY PRO L 237 03 67 04 (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD WINE ENTHUSIAST N’FINITY PRO L 237 03 67 04 (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
WINE ENTHUSIAST N’FINITY PRO L 237 03 67 04 (01) PDF SUMMARY:
What basic safety precautions should be taken when using this appliance?
Always exercise basic safety precautions, including reading all instructions before using the appliance. This appliance should not be used by individuals with reduced physical, sensory, or mental capabilities, or those lacking experience and knowledge, unless supervised or instructed by a responsible person. Children should be supervised to ensure they do not play with the appliance. The appliance should only be used for its intended purpose as described in the user manual. The wine cellar must be properly installed according to the installation instructions before use.
How should you unplug the wine cellar?
Never unplug the wine cellar by pulling on the power cord. Always grasp the plug firmly and pull straight out from the outlet.
When should you unplug the wine cellar?
Unplug the wine cellar before cleaning or making any repairs.
Who should perform service on the wine cellar?
If the product requires service, it is strongly recommended that a certified technician performs the service.
Can the supply cord be replaced?
No, the supply cord cannot be replaced. If the cord is damaged, the appliance should be scrapped.
Where can this appliance be installed?
This appliance is designed for free-standing installation or can be recessed into cabinetry.
What should you do with an old wine cellar that is not being used?
If an old wine cellar is not being used, remove the door and leave the shelves in place to reduce the possibility of danger to children.
Should you operate the wine cellar in the presence of explosive fumes?
No, do not operate the wine cellar in the presence of explosive fumes.
Can you store food in the wine cellar?
No, do not store foods in the wine cellar, as the interior temperature may not be cool enough to prevent spoilage or may cause bacteria growth.
What should you do before throwing away an old wine cellar?
Before throwing away an old wine cellar, take off the doors and leave the shelves in place so that children may not easily climb inside.
What electrical requirements are needed for the wine cellar?
Make sure there is a suitable power outlet (115 volts, 15 amps outlet) with proper grounding to power the wine cellar. Avoid the use of three-plug adapters or cutting off the third grounding in order to accommodate a two-plug outlet, as this is a dangerous practice that provides no effective grounding and may result in a shock hazard.
What are some limitations when installing the wine cellar?
Do not install the wine cellar in any location that is not properly insulated or heated, such as a garage, as it was not designed to operate in temperatures below 60° Fahrenheit. Select a suitable location for the wine cellar on a hard, even surface away from direct sunlight or heat sources like radiators or cooking appliances. Any floor unevenness should be corrected with the leveling legs located on the front and rear bottom corners of the wine cellar.
When should you avoid using an extension cord?
Avoid using an extension cord because of potential safety hazards under certain conditions. If it is necessary to use an extension cord, use only a 3-wire extension cord that has a 3-blade grounding plug and a 3-slot outlet that will accept the plug. The marked rating of the extension cord must be equal to or greater than the electrical rating of the appliance.
What should you do before connecting the wine cellar to a power source?
Before connecting the wine cellar to the power source, let it stand upright for approximately 24 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.
What should you do after plugging the unit into an electrical outlet?
Once the unit is plugged into an electrical outlet, let it run for at least 30 minutes to acclimate before making any adjustments.
What is the factory preset temperature of the wine cellar?
When the wine cellar is plugged in for the first time, the LED display will show the factory preset temperature of 50°F.
How do you set the temperature of the wine cellar?
To set the temperature, press the up or down arrow button to increase or decrease the temperature setting until the desired temperature is attained. It may take some time to reach the set temperature.
What tips should you follow to optimize loading of the wine cellar?
Remove tape from shelves once the unit is stable and ready for storage. Disperse the bottles evenly to avoid concentrating weight in one place and make sure that bottles do not touch the back of the cabinet or the step at the bottom. Do not group all bottles together at the top or bottom of the cabinet. Only pull out one rolling shelf at a time. Maximum weight capacity per shelf is 55 lbs. Each shelf is designed to hold one row of 11 to 13 bottles.
What should you do before reversing the door swing?
Before reversing the door swing, tape down the shelves to avoid movement during the process.
How do you reverse the door swing of the wine cellar?
- Pry up the hinge cover (1) and hinge cap (2) using a flat head screwdriver.
- Using a Phillips head screwdriver, loosen the hinge screws (3a) and remove the top hinge (4).
- Lift the door (5) off the bottom hinge and set it aside, being careful not to lose the washer (11) between the bottom hinge and the door.
- Remove lock hole cap (6) and screws (7) and (8) from the top of the door using a flat head screwdriver to pry up the lock cap.
- Using a Phillips head screwdriver, loosen screws (3b) to remove the hinge support rod (9) at the bottom of the door.
- Rotate the door 180° so that the top is now the bottom.
- Attach the bottom hinge support rod (9) to the bottom corner of the door and attach with screws (3b).
- Using a flat head screwdriver, pry off the bottom hinge cover (12).
- Using a Phillips head screwdriver, loosen and remove screws (3c) and (13) and bottom hinge (10).
- Move the bottom hinge (10) to the opposite side and re-insert all screws (3c) and (8).
- Clip the bottom hinge cover (12) back onto the bottom hinge (10).
- Place the washer (11) over the hinge support rod (9) and place the door back on the bottom hinge by aligning the hinge support rod (9) with the outer hinge hole on bottom hinge (10).
- Re-attach top hinge (4) using screws (3a).
- Insert lock cap (6), screws (7) and (8), and clip on hinge cap (2).
Do you need to alter the location of the handle for stainless steel doors?
No, stainless steel doors include a handle centered in the middle of the door, so there is no need to alter the location of the handle.
Do you need to alter the location of the door pull handles for glass doors?
No, glass doors include integrated door pull handles, so there is no need to alter the location of door pull handles.
How do you install the handle?
- Pull back the door seal behind handle location.
- Insert screws into pre-drilled screw holes.
- Attach the handle and tighten the screws.
- Press the door seal back into place.
What features are included on the operating panel of the wine cellar?
The operating panel includes features to operate and control the temperature. The features are:
- Power: Turns the Wine Cellar System ON and OFF
- Lighting: Turns the Interior Light ON and OFF
- Power & Lighting: Press Both Simultaneously to Lock or Unlock the Control Panel
- Temp Up & Down: Single Zone Only – Pressing together alters the Temperature Display to Fahrenheit or Celsius
- °C/°F: Dual Zone Only – Alters the Temperature Display to Fahrenheit or Celsius
- Display Window: Displays Temperature
- Temp. Up: Increases Set Temperature
- Temp. Down: Decreases Set Temperature
Where should the wine cellar be placed in terms of ambient temperature?
The wine cellar should be placed in a location where the ambient temperature is between 60-80° Fahrenheit. If the ambient temperature is above or below this range, the performance of the unit may be affected.
What does the temperature readout show?
The temperature readout shows the actual cellar temperature. It will temporarily show the set temperature while making adjustments, then revert back after 10 seconds.
How do you set the temperature for Dual Zone models?
- Make sure the power cord is connected to a properly grounded outlet.
- Turn the power ON.
- Use the Zone Select to select the Upper or Lower zone. The Upper zone must be set 4°F colder than the lower zone.
- Set the desired temperature by pushing the UP or DOWN button.
- Temperatures increase or decrease 1°F with each push of the UP or DOWN button.
How do you lock the control panel?
- Simultaneously press the Power and Lighting buttons.
- The control panel will beep (Dual & Single Zone) and the LOCK icon will illuminate (Dual Zone only).
- The control panel will ‘sleep’ after being left untouched for 10 seconds (Dual Zone only). Touch any button to wake it up before making adjustments.
How do you unlock the control panel?
- Touch the control panel to wake it up from sleep mode (Dual Zone only).
- Simultaneously press the Power and Lighting buttons.
- The control panel will beep (Dual & Single Zone) and the LOCK icon will darken (Dual Zone only).
How do you remove the rolling shelf?
- Remove all bottles.
- Pull out the shelf as far as possible.
- Hold one of the telescopic rails with one hand, with the other hand gently lift the front of the shelf from the front tab, then push backward to unlock from the rear hook.
- Repeat with the other side.
What are the recommended temperature ranges for serving different types of wine?
- Red Wines: 60-66°F
- White Wines: 45-52°F
- Sparkling Wines: 40-45°F
How do you operate the interior light?
Simply push the “Light” button to turn the light on, and push it again to turn it off.
How do you use the door lock?
Insert the key into the lock and turn counterclockwise to unlock the door. To lock the door, reverse the operation, making sure the metal pin is engaged completely, then remove the key.
What are some normal operating sounds you may hear?
Boiling water, gurgling sounds, or slight vibrations that are the result of the refrigerant circulating through the cooling coils, and the thermostat control will click when it cycles on and off.
What is the temperature control range for single zone and dual zone wine cellars?
- Single Zone: 50°F to 66°F
- Dual Zone: Upper Zone: 41°F to 54°F and Lower Zone: 54°F to 66°F
What should you do before cleaning the wine cellar?
To avoid electric shock, always unplug your wine cellar before cleaning.
How do you clean the wine cellar?
Prepare a cleaning solution of 3-4 tablespoons of baking soda mixed with warm water. Use a sponge or soft cloth dampened with the cleaning solution to wipe down the wine cellar. Rinse with clean warm water and dry with a soft cloth. Do not use harsh chemicals, abrasives, ammonia, chlorine bleach, concentrated detergents, solvents, or metal scouring pads.
How often should you clean the door gaskets?
Clean door gaskets every three months according to general cleaning instructions.
What should you do to maintain the door gaskets?
Keep gaskets clean and pliable to assure a proper seal. Apply petroleum jelly lightly on the hinge side of gaskets to keep them pliable and assure a good seal.
What should you do during power interruptions?
Remove the power cord from the AC outlet when a power outage occurs. When power has been restored, wait 3 to 5 minutes, then re-plug the power cord into the AC outlet.
What should you do before long vacations or absences?
For long vacations or absences, unplug the wine cellar and clean the wine cellar and door gaskets according to the “General cleaning” section. Leave doors open so air can circulate inside.
How should you move the wine cellar?
Always move the wine cellar vertically. Do not move it with the unit lying down, as possible damage to the sealed system could occur. After moving, wait for 24 hours before plugging in the wine cellar.
What should you check if the wine cellar does not operate?
Check if the wine cellar is plugged in and check if there is power in the AC outlet, by checking the circuit breaker.
What could be some reasons why wine appears too warm?
Frequent door openings, recently added wine needs time to reach the desired temperature, check gaskets for a proper seal, clean condenser coils, adjust the temperature control to a colder setting.
What should you do if the wine temperature is too cold?
If the temperature control setting is too cold, adjust to a warmer setting.
Why might the wine cellar run too frequently?
This may be normal to maintain a constant temperature during high-temperature and humid days. The doors may have been opened frequently or for an extended period of time, condenser coils may need to be cleaned, check the gasket for a proper seal, or check to see if the doors are completely closed.
Why might there be moisture build-up on the interior or exterior of the wine cellar?
This is normal during high humidity periods, could be due to prolonged or frequent door openings, or check door gaskets for a proper seal.
What should you do if the wine cellar door does not shut properly?
Level the wine cellar and check for blockages, e.g., wine bottles, shelves.
CLICK HERE TO DOWNLOAD WINE ENTHUSIAST N’FINITY PRO L 237 03 67 04 (01) PDF MANUAL