VIZIO M70-F3 (01) PDF MANUAL


Post questions, comments, reviews or page errors in the comment box below.

Your File is Ready … Download PDF

CLICK HERE TO DOWNLOAD VIZIO M70-F3 (01) PDF MANUAL


PDF Content Summary: FPO USER MANUAL Models: M55-F0,M65-F0, and M70-F3

Safety & Certification THANK YOU FOR CHOOSING VIZIO And congratulations on your new VIZIO TV. To get the most out of your new VIZIO product, read these instructions before using your product and retain them for future reference. Be sure to inspect the package contents to ensure there are no missing or damaged parts. PRODUCT REGISTRATION To purchase or inquire about accessories and installation services for your VIZIO product, visit our website at VIZIO.com or call toll free at (877) 698-4946. We recommend that you register your VIZIO product at VIZIO.com. EXTENDED WARRANTIES For peace of mind, and to protect your investment beyond the standard warranty, VIZIO offers on-site extended warranty service plans. These plans provide additional coverage during the standard warranty period. To purchase an extended warranty service plan, visit VIZIO.com. WHEN READING THIS MANUAL When you see this symbol, please read the accompanying important warning or notice. It is intended to alert you to the presence of important operating instructions. When you see this symbol, please read the accompanying helpful tip. IMPORTANT SAFETY INSTRUCTIONS Your TV is designed and manufactured to operate within defined design limits. Misuse may result in electric shock or fire. To prevent your TV from being damaged, the following instructions should be observed for the installation, use, and maintenance of your TV. Read the following safety instructions before operating your TV. Keep these instructions in a safe place for future reference. • To reduce the risk of electric shock or component damage, switch off the power before connecting other components to your TV. • Read these instructions. • Keep these instructions. • Heed all warnings. • Follow all instructions. • Do not use this apparatus near water. • Clean only with dry cloth. • Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. • Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. • Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. • Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. • Only use attachments/accessories specified by the manufacturer. • Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. • Unplug this apparatus during lightning storms or when unused for long periods of time. • Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. • Unplug the power cord before cleaning your TV. • When moving your TV from an area of low temperature to an area of high temperature, condensation may form in the housing. Wait before turning on your TV to avoid causing fire, electric shock, or component damage. • A distance of at least three feet should be maintained between your TV and any heat source, such as a radiator, heater, oven, amplifier etc. Do not install your TV close to smoke. Operating your TV close to smoke or moisture may cause fire or electric shock. • Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of your TV and to protect it from overheating, be sure these openings are not blocked or covered. Do not place your TV in a bookcase or cabinet unless proper ventilation is provided. • Never push any object into the slots and openings on your TV cabinet. Do not place any objects on the top of your TV. Doing so could short circuit parts causing a fire or electric shock. Never spill liquids on your TV. • Your TV should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company. • Do not apply pressure or throw objects at your TV. This may compromise the integrity of the TV. The manufacturer’s warranty does not cover user abuse or improper installations. • The power cord must be replaced when using different voltage than the voltage specified. For more information, contact your dealer. • When connected to a power outlet, power is always flowing into your TV. To totally disconnect power, unplug the power cord. • The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un-isolated, dangerous voltage within the inside of your TV that may be of sufficient magnitude to ii constitute a risk of electric shock to persons. • Do not overload power strips and extension cords. Overloading can result in fire or electric shock. • The wall socket should be installed near your TV and easily accessible. • Only power of the marked voltage can be used for your TV. Any other voltage than the specified voltage may cause fire or electric shock. • Do not touch the power cord during lightning. To avoid electric shock, avoid handling the power cord during electrical storms. • Unplug your TV during a lightning storm or when it will not be used for long period of time. This will protect your TV from damage due to power surges. • Do not attempt to repair or service your TV yourself. Opening or removing the back cover may expose you to high voltages, electric shock, and other hazards. If repair is required, contact your dealer and refer all servicing to qualified service personnel. • WARNING: Keep your TV away from moisture. Do not expose your TV to rain or moisture. If water penetrates into your TV, unplug the power cord and contact your dealer. Continuous use in this case may result in fire or electric shock. • Do not use your TV if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power cord and contact your dealer immediately. Do not try to repair your TV yourself. • Avoid using dropped or damaged appliances. If your TV is dropped and the housing is damaged, the internal components may function abnormally. Unplug the power cord immediately and contact your dealer for repair. Continued use of your TV may cause fire or electric shock. • Do not install your TV in an area with heavy dust or high humidity. Operating your TV in environments with heavy dust or high humidity may cause fire or electric shock. • Follow instructions for moving your TV. Ensure that the power cord and any other cables are unplugged before moving your TV. • To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. • When unplugging your TV, hold the AC/DC power adapter, not the cord. Pulling on the power cord may damage the wires inside the cord and cause fire or electric shock. When your TV will not be used for an extended period of time, unplug the power cord. • To reduce risk of electric shock, do not touch the connector with wet hands. • Insert batteries in accordance with instructions. Incorrect polarities may cause the batteries to leak which can damage the remote control or injure the operator. Do not expose batteries to excessive heat such as sunshine, fire or the like. • If any of the following occurs, contact the dealer: - The power cord fails or frays. - Liquid sprays or any object drops into your TV. - Your TV is exposed to rain or other moisture. - Your TV is dropped or damaged in any way. - The performance of your TV changes substantially. • This apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. • The mains plug or appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. • CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. • The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated DANGEROUS VOLTAGE within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electrical shock to persons. • WARNING: Exposure to loud sounds can damage your hearing causing hearing loss and tinnitus (ringing or buzzing in the ears). With continued exposure to loud noises, ears may become accustomed to the sound level, which may result in permanent damage to hearing without any noticeable discomfort. • Install the TV where it cannot be pulled, pushed or knocked over. • Do not allow children to hang onto the product. • Store the accessories (remote, batteries, etc.) in a location safely out of the reach of children. • The American Academy of Pediatrics discourages television viewing for children younger than two years of age. • WARNING: Never place a television set in an unstable location. A television set may fall, causing serious personal injury or death. • Many injuries, particularly to children, can be avoided by taking simple precautions such as: • Using cabinets or stands recommended by the manufacturer of the television set. • Only using furniture that can safely support the television set. • Ensuring the television set is not overhanging the edge of the supporting furniture. • Not placing the television set on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television set to a suitable support. • Not placing the television set on cloth or other materials that may be located between the television set and the supporting furniture. • Educating children about the dangers of climbing on furniture to reach the television set or its controls. • If your existing television set is being retained and relocated, the same considerations as above should be applied. • WARNING: To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. iii

TELEVISION ANTENNA CONNECTION PROTECTION If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges. Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of the grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements of the grounding electrode. Lightning Protection For added protection of the TV during a lightning storm or when it is left unattended or unused for long periods of time, unplug the TV from the wall outlet and disconnect the antenna or cable system. Power Lines Do not locate the antenna near overhead light or power circuits, or where it could fall into such power lines or circuits. Remember, the screen of the coaxial cable is intended to be connected to earth in the building installation. Ground Clamp Antenna Lead In Wire Antenna Discharge Unit (NEC Section 810-20) Grounding Conductors (NEC Section 810-21) Ground Clamps Power Service Grounding Electrode System Electric Service Equipment (NEC ART 250, part H)

iv

For DTS patents, see patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS Studio Sound II is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved. For DTS patents, see patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS TruVolume is a trademark of DTS, Inc. © DTS, Inc. All Rights Reserved.

Manufactured under license from Dolby Laboratories.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories.

v Table Of Contents

Table Of Contents Completing The First-Time Setup ...............................11 Using the On-Screen Menu .........................................12 Navigating the On-Screen Menu........................................................12 Changing the Input Source ................................................................12 Changing the Screen Aspect Ratio.....................................................13 Adjusting the Picture Settings............................................................14 Adjusting More Picture Settings .....................................................15 Adjusting the Color Temperature...................................................15 Adjusting the Picture Mode Edit Settings ......................................16 Saving a Custom Picture Mode.......................................................16 Locking/Unlocking a Custom Picture Mode...................................16 Deleting a Custom Picture Mode....................................................17 Resetting a Picture Mode................................................................17 Adjusting the Color Tuner Settings ................................................18 Adjusting the Audio Settings..............................................................21 Adjusting the network Settings..........................................................22 Setting Timers .....................................................................................24 Setting the Timer .............................................................................24 Setting the Auto Power Off Feature ...............................................24 Using the Blank Screen Feature .....................................................24 Setting Up Channels ...........................................................................25 Scanning for Channels ....................................................................25 Skipping Channels ...........................................................................25 Listening to Alternate Audio ..............................................................26 Changing the Analog Audio Language ...........................................26 Parental controls ................................................................................27 Using Parental Controls ..................................................................27 Enabling or Disabling Program Ratings .........................................27 Locking and Unlocking Channels....................................................27 Blocking and Unblocking Content by Rating .................................27 Setting Up Closed Captioning ............................................................28 Changing the Appearance of Digital Closed Captions ..................28 Renaming Devices on the Input Menu..............................................30 Changing the TV Settings ...................................................................31 Viewing System Information...........................................................31 Changing the On-Screen Menu Language .....................................31 Setting the Time and Local Settings ...............................................32 Adjusting the CEC Settings..............................................................32 Turning the Power Indicator On or Off..........................................32 Changing the Display Name............................................................33 Using the Reset & Admin Menu.........................................................34 Restoring the TV to Factory Default Settings.................................34 Using the Info Window .......................................................................36 What is SmartCast TVSM?..................................................................37 How to Launch SmartCast TV .........................................................37 SmartCast TV................................................................37 Playing USB Media .......................................................38 Displaying USB Media.........................................................................38 Preparing Your USB Drive to Play USB Media ...............................38 Removing the USB Drive from the TV ............................................38 Troubleshooting & Technical Support........................42 Specifications ...............................................................46 Regulatory Information ...............................................47 Limited Warranty .........................................................48 Legal Information.........................................................50

vi Getting to Know Your TV 1 FRONT PANEL Remote Sensor and Power Indicator When using the remote, aim it directly at this sensor. The power indicator flashes on when the TV turns on, then goes out after several seconds. To keep the power indicator on as long as the TV is on, see Turning the Power Indicator On or Off. 7

REAR PANEL USB - Connect a USB thumb drive to play photo, music, or video. Component - Connect a component. HDMI - Connect an HDMI device. Coaxial - Connect to a coaxial cable from cable, satellite, or antenna. HDMI - Connect an HDMI device. Optical Audio Out - Connect to an optical/SPDIF audio device, such as home audio receiver. Audio Out - Connect to an RCA device, such as sound bar. Ethernet - Connect an Ethernet cable to modem/ router. Power - Press to turn on the TV. Press and hold to turn the TV off. Volume - Press to increase or decrease the TV volume level. Input - Press to access the input menu. 1 .. Note: The image shown here is for illustrative purposes only and may be subject to change. The actual number of ports and their locations may vary, depending on the model. 8 8

1 WALL-MOUNTING THE TV To mount your TV on a wall, you will need a wall mount. Consult the information on this page to find the appropriate mount for your TV. Be sure the mount you choose is capable of supporting the weight of the TV. After you have determined that you have the correct mount for your TV, you can begin the installation. To install your TV on a wall: 1. Disconnect any cables connected to your TV. 2. Place the TV face-down on a clean, flat, stable surface. Be sure the surface is clear of debris that can scratch or damage the TV. 3. Remove the stands by loosening and removing the screws. 4. Attach your TV and wall mount to the wall, carefully following the instructions that came with your mount. Use only with a UL-listed wall mount bracket rated for the weight/load of this TV. Installing a TV on a wall requires lifting. To prevent injury or damage to the TV, ask someone to help you. M55-F0 M65-F0 M70-F3 Screw Size: M6 M6 M6 Hole Depth: 20 mm 20 mm 12mm Hole Pattern: 200 mm x 200 mm 400 mm x 200 mm 400mm x 400mm Weight w/o Stand: 35.02 lbs (15.9 kg) 51.98 lbs (23.58 kg) 57.63 lbs (26.14 kg) 9

1 USING THE REMOTE 1 2 3 1. Input - Change the currently displayed input Replacing the Batteries

4 5 6 7 8 9 2. Power - Turn Television on or off 3. App Launcher - Quickly launch the pictured app 4. Exit - Close the on-screen menu 5. Menu - Display the settings menu 6. Arrow - Navigate the on-screen menus 7. OK/Play/Pause - Select the highlighted menu option and play or pause content 8. Back - Go to the previous on-screen menu 9. Info - Display the info window 10. Volume Up/Down - Increase or decrease the loudness of the audio 11. Closed Caption - Open the closed caption menu 1. Find the notch on the back of the remote. Insert a coin and pry open the back cover. 2. Insert two batteries into the remote control. Make sure that the (+) and (-) symbols on the batteries match the (+) and (-) symbols inside the battery 10 11 12 13 14 12. V Button - Launch SmartCast TV/Return to SmartCast TV Home Screen 13. Pic - Cycle through the different picture setting modes 14. Channel Up/Down- Change the channel 15. Mute - Turn the audio on or off compartment. 3. Replace the battery cover. In many places batteries cannot be thrown away or discarded with household waste. Please ensure you properly dispose of your batteries consistent with the laws and/or regulations where you live. For more information please visit: 15 16 17 18 19 16. Last - Return to the channel last viewed 17. Number Pad - Manually enter a channel 18. Wide - Change the Television mode 19. Dash - Use with number pad to manually enter a digital sub-channel. (For example, 18-4 or 18-5) vizio.com/environment. WARNING: keep the remote control batteries away from children. It may cause choking and/or lead to a fire or chemical burn if mishandled. Do not dispose of batteries in fire. Replace only with batteries of the correct type. When needed, VIZIO recommends replacing the batteries that came with this remote with two, new Duracell ‘AAA’ alkaline batteries

10 Completing The First-Time Setup 2 The first time you turn on the TV, the on-screen instructions will guide you through each of the steps necessary to get your TV ready for use: Before you begin the first-time setup: • Your Television should be installed and the power cord should be connected to an electrical outlet. • If you have a wireless network, have the network password ready. • If you are connecting to your network with an Ethernet cable, connect it to the Ethernet port on the Television. 1. Choose your language. 2. Choose home use. 3. Choose your country. 4. Choose your Wi-Fi and enter the password. 5. Name your TV. 6. Scan for channels. 7. Accept the T&Cs and register your device. All set! 11 Using the On-Screen Menu 3

Your TV features an easy-to-use on-screen menu. To open the on-screen menu, press the Menu button on the remote. From this menu, you can: NAVIGATING THE ON-SCREEN MENU To open the on-screen menu, press the Menu button on the remote. CHANGING THE INPUT SOURCE External devices such as DVD players, Blu-ray Players, and video game consoles can be connected to your TV. To use one of these devices

• Adjust the Picture settings • Adjust the Audio settings • Adjust the Network settings • Set up the Timers • Adjust the Channel settings TV Settings Picture Audio Network Timers Channels Use the Arrow buttons to highlight a menu option, and press the OK button to select that option. with your TV, you must first change the input source using the Input menu. To change the input sources: 1. Press the Input button on the remote. The Input menu is displayed. 2. Use the Right/Left Arrow buttons or the Input button on the remote to highlight the input you wish to view and press OK. The CC • Set up Closed Captioning • Name and adjust Inputs • Adjust TV settings • View user manual Closed Captions Input Settings System User Manual selected input is displayed. Change Input Input Name

SMARTCAST HDMI-1 HDMI-2 COMP TV

HDMI-4 HDMI-3 While navigating the on-screen menu, you can press the Back button at any time to return to the previous menu screen. The Exit button will close the on screen menu. You can change the input names that appear on the Input menu to make your devices easy to recognize. See Renaming Devices on the Input Menu for more information. 12 3 CHANGING THE SCREEN ASPECT RATIO

The TV can display images in four different modes: Normal, Panoramic, Wide, and Zoom. Each mode displays the picture differently. Some programs have black bars on the top or sides of the picture so that the picture keeps its original shape. Examples include wide-screen movies and older television programs. To change the screen aspect ratio: 1. Press the Wide button on the remote. 2. Use the Arrow buttons to highlight the aspect ratio you wish to view and press OK. • Normal preserves the content’s original aspect ratio and size. • Panoramic stretches a 4:3 aspect ratio picture to the left and right edges of the screen. The center of the image is not stretched, but the sides of the image are extremely stretched. If you are watching widescreen (1.85:1 or 2.35:1) content with black bars on the top and bottom, the black bars will still appear on the top and bottom of the display image. • Wide stretches a 4:3 aspect ratio picture to the edges of the screen. Since the picture is being stretched, the display image may appear distorted—figures appear short and fat. If the program is already formatted for widescreen viewing (1.85:1 or 2.35:1), then black bars will appear on the top and bottom of the display image. • Zoom expands images evenly in all directions (33% taller and 33% wider) with black bars to fit the screen. A 720p image will fill a 1080p screen. Tip: The aspect ratio cannot be changed for Ultra HD content or HDR content. Normal Panoramic Wide Zoom Note: Aspect ratio settings may vary by Input source. 13

ADJUSTING THE PICTURE SETTINGS Your TV can be adjusted to suit your preferences and viewing conditions. If you save changes to the settings for a picture mode, an asterisk appears after its name (see Saving a Custom Picture 3. Use the Arrow buttons on the remote to highlight Picture Mode, then use the Left/Right Arrow buttons to change the picture mode: • Standard mode sets the picture settings to the Picture 3 4. To manually change each of the picture settings, use the Up/ Down Arrow buttons on the remote to highlight that picture setting, then use the Left/Right Arrow buttons to adjust the setting: • Auto Brightness Control - The auto brightness control detects the light levels in the room and automatically adjusts the backlight for the best picture. Select Off, Low, Medium, or Back Mode). To adjust the picture settings: 1. Press the Menu button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight Picture and press OK. The PICTURE menu is displayed. default settings. • Calibrated mode sets the picture settings to values ideal for watching TV in a brightly-lit room. • Calibrated Dark mode sets the picture settings to values ideal for watching TV in a dark room. • Vivid mode sets the picture settings to values that produce a brighter, more vivid picture. • Game mode reduces throughput delays and optimizes the picture settings for displaying game console output. Picture Mode Calibrated Auto Brightness Control Off Backlight 90 Brightness 50 Contrast 50 Color 50 Tint 0 Sharpness 20 More Picture Picture Mode Edit Color Calibration High. • Backlight - Adjusts the LED brightness to affect the overall brilliance of the picture. Backlight cannot be adjusted when starting from some picture modes. • Brightness - Adjusts the black level of the picture. When this setting is too low, the picture may be too dark to distinguish details. When this setting is too high, the picture may appear faded or washed out. • Contrast - Adjusts the white level of the picture. When this setting is too low, the picture may appear dark. When this setting is too high, the picture may appear faded or washed out. If the setting is too high or too low, detail may be difficult to distinguish in dark or bright areas of the picture. • Color - Adjusts the intensity of the picture colors. • Tint - Adjusts the hue of the picture. This setting is useful in adjusting the flesh tones in the picture. If flesh appears too orange, reduce the level of color before adjusting tint. • Sharpness - Adjusts the edge sharpness of picture elements.

• Computer mode optimizes the picture settings for displaying computer output. It can be used to sharpen non-HD (high definition) content; however, it will not produce detail that does not otherwise exist. 5. When you have finished adjusting the picture settings, press the Exit button on the remote. 14

3 Adjusting More Picture Settings • Game Low Latency - Select On to reduce video delay (lag) Adjusting the Color Temperature

To adjust more picture settings: 1. From the PICTURE menu, use the Arrow buttons to highlight More More Picture when gaming. • Film Mode - Optimizes the picture for watching film. Select Auto or Off. Back • Color Space - Select Color Space for the source. Video Adjusting the color temperature changes the white balance of the picture. To adjust the color temperature:

Picture, and then press OK. 2. Use the Arrow buttons to highlight the setting you wish to adjust, then press the Left/ Right Arrow buttons to change the setting: • Color Temperature - See Adjusting the Color Temperature. • Black Detail - Adjusts the average brightness of the picture to compensate for large areas of brightness. Select Off, Low, Medium, or High. Color Temperature Normal Black Detail Off Extreme Black Engine™ Low Clear Action Off Reduce Noise Game Low Latency Off Film Mode On Color Space Auto Gamma 2.2 sources uses YCbCr, but PC uses RGB. • Gamma - Set the shape of the Gamma curve. Use lower Gamma values for bright room conditions, and higher values when it’s dark. 3. When you have finished adjusting More Picture Settings, press the Exit button on the remote. 1. From the MORE PICTURE menu, use the Arrow buttons to highlight Color Temperature, and then press OK. 2. Use the Arrow buttons on the remote to highlight a color temperature preset and then press OK. • Normal is optimized for television viewing. • Cool produces a blue-hued picture. • Computer optimizes the picture for use as a Color Temperature Normal Cool Computer Back

• Xtreme Black Engine™ - Based on the content, dynamically adjusts and balances the brightness and the contrast ratio of the picture by locally adjusting backlight zones. • Clear Action - Reduces blur in scenes with fast action but limtis the range for the Backlight setting. • Reduce Noise - Reduce Signal Noise - Diminishes artifacts in the image caused by the digitizing of image motion content. Select Off, Low, Medium, or High. - Reduce Block Noise - Reduces pixelation and distortion for mpeg files. Select Off, Low, Medium, or High. PC monitor. 3. When you have finished adjusting the color temperature, press the Exit button on the remote. 15

Adjusting the Picture Mode Edit Settings Saving a Custom Picture Mode 3 Locking/Unlocking a Custom Picture Mode Picture Mode Edit Settings allow you to make precise adjustments to the picture and to create picture modes to save groups of picture settings. To adjust the Picture Mode Edit settings: Custom picture modes allow you to save a group of custom settings for various viewing conditions and video sources. • Changes made while on any preset picture mode will add an asterisk on the top right corner of the preset mode. • The custom picture mode is not automatically saved. Custom picture modes can be locked/unlocked with a unique PIN to prevent accidental changes to their settings. To lock all custom picture modes: 1. From the PICTURE MODE EDIT

1. From the PICTURE menu, use the Arrow buttons to highlight Picture Mode Edit, and then press OK. Picture Picture Mode Edit Back Back To save a custom picture mode: Save Picture Mode Back menu, use the Arrow buttons to highlight Lock Picture Mode, and then press OK. The System PIN code Back Change the PIN used for the System PIN. The PICTURE MODE EDIT menu is displayed. 2. Use the Arrow buttons to highlight the setting you wish to adjust, then press OK to change the setting: • Save Picture Mode - Save a custom picture mode. Picture Mode Calibrated Save Picture Mode Auto Brightness Control Off Lock Picture Mode Backlight 90 Reset Picture Mode - Calibrated Brightness 50 Contrast 50 Color 50 Tint 0 Sharpness 20 More Picture 1. From the PICTURE MODE EDIT menu, use the Arrow buttons to highlight Save Picture Mode, and then press OK. The SAVE PICTURE MODE menu is displayed. 2. Use either on-screen keyboard to enter a name for your custom picture mode. a b c d e f g h i j k l m n o p q r s t u v w x y z 0 1 2 3 4 5 6 7 8 9 .@# äêí Space LOCK PICTURE MODE menu is displayed. 2. Use the Number Pad on your remote to enter a unique 4-digit PIN. If a system PIN is set, then lock/unlock. If no system PIN is set, then you will be prompted to set a PIN. New PIN Confirm PIN Cancel Save • Lock Picture Mode - Prevent changes to custom picture modes. Choose between On or Off. • Reset Picture Mode - Standard† - Reset the picture Picture Mode Edit Color Calibration Picture Mode Edit Save Picture Mode Back 3. Highlight Save and press OK. 4. Press the Exit button to exit the menu screens. Save 3. Highlight Save and press OK. 4. Press the Exit button to exit the menu screens. To unlock all custom picture modes: Enter the 4-digit PIN using the numbers keys on the remote.

mode settings to factory default values. † Only available on customized preset modes. Lock Picture Mode On Reset Picture Mode - Standard* 1. From the PICTURE MODE EDIT menu, use the Arrow buttons to highlight Lock Picture Mode, and then press OK. The LOCK PICTURE MODE menu is displayed. 2. Use the Arrow buttons to select Off. 3. Use the Number Pad on your remote to enter your 4-digit PIN. 4. Make any desired changes to the picture modes. 5. Then turn ON Lock Picture Mode. 6. Press the Exit button to exit the menu screens. 16

3 Deleting a Custom Picture Mode Custom picture modes that are no longer needed can be deleted. Inputs assigned to a deleted custom picture mode become assigned to the Calibrated picture mode. To delete a custom picture mode: 1. From the PICTURE MODE EDIT menu, use the Arrow buttons to highlight

Delete Picture Mode, and then press OK. The DELETE PICTURE MODE window is displayed. To delete the user created Custom 1 picture mode, select the Delete button. Delete Cancel

2. Use the Left/Right Arrow buttons to highlight Delete and press OK. 3. Press the Exit button to exit the menu screens. Resetting a Picture Mode A preset picture mode that has been edited can be restored to the factory default settings.

To reset a customized preset picture mode: 1. From the PICTURE MODE EDIT menu, use the Arrow buttons to highlight Reset Picture Mode, and then press OK. The RESET PICTURE MODE window is displayed. Select Reset to restore Standard picture mode to factory defaults. Reset Cancel

2. Use the Left/Right Arrow buttons to highlight Reset and press OK. 3. Press the Exit button to exit the menu screens. 17

Adjusting the Color Tuner Settings 3 To turn color channels off and on: To adjust the 11 Point White Balance settings: The Color Tuner settings allow you to adjust the HSB color and 11 point white balance, turn color channels off for testing, and display color bar, flat, and ramp test patterns. The Color Tuner, 11 Point White Balance, and test patterns allow technicians to manually calibrate the TV. Calibration requires specialized training, an input with precisely set colors, and a specialized light meter. To adjust the HSB color settings: 1. From the COLOR CALIBRATION menu, use the Arrow buttons to highlight Color Tuner, and then press OK. The COLOR TUNER menu is displayed. Color Tuner Red Green Blue Cyan Magenta Yellow Hue 0 0 0 0 25 -14 Saturation -1 5 -4 0 -2 0 Brightness -24 0 -22 0 0 0 Offset 0 0 0 Gain 0 0 0 2. Use the Arrow buttons on the remote to highlight the Hue, Saturation, Brightness, Offset, or Gain of the color you wish to adjust. Press the OK button. 3. Use the Left/Right Arrow buttons to adjust the value. When you are finished press the OK button to save the setting. 4. When you have finished adjusting the color tuner settings, press the Exit button. 1. From the COLOR CALIBRATION menu, use the Arrow buttons to highlight Color Tuner, and then press OK. The COLOR TUNER menu is displayed. Color Tuner Red Green Blue Cyan Magenta Yellow Hue 0 0 0 0 25 -14 Saturation -1 5 -4 0 -2 0 Brightness -24 0 -22 0 0 0 Offset 0 0 0 Gain 0 0 0 2. Use the Arrow buttons on the remote to highlight Red, Green, or Blue. 3. Press the OK button to turn the color channel off or on. An X appears over a color channel that has been turned off. 4. Use the Arrow buttons to highlight another color channel to turn off or on. Only two color channels can be turned off at the same time. 5. When you have finished with the color channels, press the Exit button. 1. From the Color Tuner menu, use the Arrow buttons to highlight Color Tuner, and then press the Left/Right Arrow buttons until the 11 POINT WHITE BALANCE menu is displayed. 11 Point White Balance Gain Red Green Blue 5% 0 0 0 2. Use the Arrow buttons on the remote to highlight the Gain and Color values you wish to adjust. Press the OK button and use the Left/Right Arrow buttons to adjust the value. When you are finished, press the OK button to save the setting. 3. When you have finished, press the Exit button. 18 To show or hide the SMPTE Test Pattern: 3 To show or hide the Flat Test Pattern: To show or hide the Ramp Test Pattern: 1. From the Color Tuner menu, use the Arrow buttons to highlight Calibration Tests, and then press the Left/Right Arrow buttons until the SMPTE TEST PATTERN menu is displayed. SMPTE Test Pattern Off 2. Use the Arrow buttons on the remote to highlight Off. Use the Left/Right Arrow buttons to highlight On to show the SMPTE Pattern. —or— To hide the SMPTE Test Pattern, use the Left/Right Arrow buttons to highlight Off. 3. When you are finished, press the Exit button. 19 1. From the Color Tuner menu, use the Arrow buttons to highlight Calibration Tests, and then press the Left/Right Arrow buttons until the FLAT TEST PATTERN menu is displayed. Flat Test Pattern Off 2. Use the Arrow buttons on the remote to highlight Off. Use the Left/Right Arrow buttons to select the percentage brightness for the flat test pattern. Selecting a percentage immediately shows the flat pattern at that brightness. —or— To disable the Flat Test Pattern, use the Left/Right Arrow buttons to highlight Off. 3. When you are finished, press the Exit button. 1. From the Color Tuner menu, use the Arrow buttons to highlight Calibration Tests, and then press the Left/Right Arrow buttons until the RAMP TEST PATTERN menu is displayed. Ramp Test Pattern Off 2. Use the Arrow buttons on the remote to highlight Off. Use the Left/Right Arrow buttons to select the color for the ramp test pattern. Selecting a color immediately shows that color ramp. —or— To hide the Ramp Test Pattern, use the Left/Right Arrow buttons to highlight Off. 3. When you are finished, press the Exit button.

3 To show or hide the Uniformity Analyzer Test Pattern: 1. From the Color Tuner menu, use the Arrow buttons to highlight Calibration Test, and then press the Left/Right Arrow buttons until the UNIFORMITY ANALYZER TEST PATTERN menu is displayed. Uniformity Analyzer Test Pattern Off 2. Use the Arrow buttons on the remote to highlight Off. Use the Left/Right Arrow buttons to highlight On to show the Uniformity Analyzer Test Pattern. —or— To hide the Uniformity Analyzer Test Pattern, use the Left/ Right Arrow buttons to highlight Off. 3. When you are finished, press the Exit button. 20

3 ADJUSTING THE AUDIO SETTINGS • Balance - Adjusts the loudness of the audio output from the

To adjust the audio settings: Audio left and right speakers. • Lip Sync - Adjusts the synchronization between the display Back 1. Press the Menu button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight Audio and press OK. The AUDIO menu is displayed. 3. Use the Arrow buttons to highlight the setting you wish to adjust, then press Left/ Right Arrow buttons to change the setting: • Speakers - Turns the built-in speakers On or Off. Speakers Auto Volume Control Display On Surround Sound On Volume Leveling Off Balance 0 Lip Sync 0 Digital Audio Out Auto Analog Audio Out Fixed image and the accompanying audio track. • Digital Audio Out - Changes the type of processing for digital audio out and HDMI ARC output when connected to a home theater audio system. Select Auto, PCM, Dolby D or Bitstream. You must select Bitstream for audio with more than two channels (3.0, 5.0, or 5.1, for example). • Analog Audio Out - Sets the volume control properties for the RCA connector when connected to a home theater audio system. Select Variable if you are controlling the volume with the TV’s volume controls, or select Fixed if an external audio device (sound bar or AV receiver) will control the volume. 4. When you have finished adjusting the audio settings, press the

When the TV speakers are set to On, DTS signals cannot be passed through digital audio outputs. • Volume Control Display - Toggle between On or Off to hide or display the on-screen volume slider that appears when volume is adjusted. • Surround Sound - Surround sound uses DTS TruSurround™ to deliver an immersive surround sound experience from the TV’s internal speakers. TruSurround completes the entertainment experience by providing deep, rich bass and by delivering crisp details and clear, intelligible dialog. Select On or Off. • Volume Leveling - Volume leveling uses DTS TruVolume™ to maintain consistent volume levels during transitions between program content, AV formats, and input sources. Select On or Off. In a few cases, volume leveling may artificially suppress volume increases, making it difficult to hear dialog or flattening sudden noises. If this occurs, turn volume leveling off. Exit button on the remote. 21

3 ADJUSTING THE NETWORK SETTINGS Changing the Manual Setup Settings Finding MAC Addresses for Network Setup Your TV is Internet-ready, featuring both an Ethernet port and built-in high-speed Wireless-N. Advanced users can fine-tune the network settings using the Manual Setup feature. To change advanced network settings: The security settings on your router may require you to enter the TV’s MAC address in the router’s settings. To find the TV’s MAC address:

If your TV is connected to a network with an Ethernet 1. From the NETWORK menu, highlight Manual Setup and press Manual Setup 1. From the NETWORK menu, highlight Manual Setup and press OK. Back cable, you will not see the wireless network connection menu. You must unplug the Ethernet cable to set a wireless network connection. Connecting to a Wireless Network To connect to a wireless network whose network name (SSID) is being broadcast: 1. Press the Menu button on the OK. The MANUAL SETUP menu is displayed. 2. To change the settings manually, use the Arrow buttons on the remote to highlight DHCP and then use the Left/Right Arrow buttons to change the setting to Off. 3. Use the Arrow and OK buttons to DHCP Off IP Address __.__.__.__ Subnet Mask __.__.__.__ Default Gateway __.__.__.__ Pref. DNS Server __.__.__.__ Alt. DNS Server __.__.__.__ RJ45 MAC 0:0:0:0:0:0 Wireless MAC 0:0:0:0:0:0 The MANUAL SETUP menu is displayed. 2. Find the MAC address for the TV at the bottom of the list. The MAC addresses for the connections in use are displayed: • RJ45 MAC - The Ethernet or RJ45 MAC address may be needed to set up your network when you have connected the TV to your network when you have connected the TV to your network with an Ethernet (Cat 5) cable.

remote. The on-screen menu is Network Back adjust each setting: • Wireless MAC - The Wireless (WiFi) MAC address may be

displayed. 2. Use the Arrow buttons on the remote to highlight Network and press OK. The NETWORK menu is displayed. Wired Connection Disconnected Wireless Access Points • IP Address - The IP address assigned to the TV. • Subnet Mask - The subnet Exit 2D • Default Gateway - Your network’s default gateway address. needed to connect your TV to your network with WiFi. Save Cancel 3. If you do not see your wireless network displayed, highlight More Access Points and press OK. The WIRELESS ACCESS POINTS menu, which is a list of available wireless networks, is displayed. 4. Highlight the name of your wireless network (this is the network’s SSID) and press OK. 5. Using the on-screeen keyboard, enter your network’s password, then highlight Connect and press OK. 6. Press the Exit button on the remote. Manual Setup Hidden Network Test Connection Press OK to select your wireless access point. • Pref. DNS Server - Your preferred domain name server address. • Alt. DNS Server - Your alternate domain name server address. 4. Use the Arrow buttons on the remote to highlight Save and press OK. 5. Press the Exit button on the remote. 22

3 Connecting to a Hidden Network Testing Your Network Connection

To connect to a wireless network whose network name (SSID) is not being broadcast: 1. From the NETWORK menu, To test your network connection: 1. From the NETWORK menu, highlight Test Connection and press OK. 2. The TEST CONNECTION screen displays the connection method,

highlight Hidden Network and press OK. The ENTER ACCESS Enter Access Point Name Enter your access point name. This Back network name, signal strength, and download speed of your network connection.

POINT NAME screen is displayed. 2. Using the on-screen keyboard, enter your network’s name (SSID), then highlight Connect and press OK. 3. Using the on-screen keyboard, enter your network’s password, then highlight Connect and press OK. 4. Press the Exit button on the remote. is used to connect to an access point with a hidden SSID. a b c d e f g h i j k l m n o p q r s t u v w x y z 0 1 2 3 4 5 6 7 8 9 .@# äêí Space Connect 3. Press the Exit button on the remote. 23

3 SETTING TIMERS Setting the Auto Power Off Feature Using the Blank Screen Feature Setting the Timer When activated, the TV’s timer will turn the TV off after a set period of time. To help save energy, your TV is set by default to turn off after 10 minutes without a video or audio signal. This feature can be deactivated. To set the Auto Power Off feature: To help save LED life, your TV screen can turn on or off while audio is streaming. To use the Blank Screen feature: 1. From the TIMERS menu, use the Up/Down Arrow buttons on

1. Press the Menu button on the remote. The on-screen menu is Timers 1. From the TIMERS menu, use the Up/Down Arrow buttons on Back the remote to highlight Auto Power Off. the remote to highlight Blank Screen.

displayed. 2. Use the Arrow buttons on the remote to highlight Timers and press OK. The TIMERS menu is displayed. 3. Use the Left/Right Arrow buttons on the remote to highlight the period of time after which you want the TV to go to sleep: 30, 60, 90, 120, or 180 minutes. If you don’t want the sleep timer to activate, change the setting to Off. 4. When you have finished setting the sleep timer, press the Exit button on the remote. Sleep Timer Off Auto Power Off 10 Minutes Blank Screen 2. Use the Left/Right Arrow buttons on the remote to change whether the TV will turn off. If you don’t want the TV to turn off when there is no signal, change the setting to Off. Otherwise, select 10 minutes. 3. When you have finished setting the auto power off time, press the Exit button on the remote. 2. Press OK/Play to immediatly blank the screen. 3. To exit Blank Screen, press any key. 24

SETTING UP CHANNELS 3 Scanning for Channels Skipping Channels You can use the TV’s Channels menu to: • Find Channels The TV may need to scan for channels before it can display programs and their associated information. A channel scan is required for free over-the-air channels (using an antenna) and cable channels After a channel scan is completed, you may find that some channels are too weak to watch comfortably. There may also be some channels you do not want to view. You can remove these channels

• Select channels to skip • Analog Audio • Digital Audio Channels Find Channels Skip Channels from an out-of-the-wall connection (without a cable box). Moving Back the TV to an area with different channels requires the TV to scan for channels again. from the TV’s memory with the Skip Channel feature. Channels that have been removed with the Skip Channel feature can still be viewed if the channel • Set Parental Controls Analog Audio Stereo Digital Audio English Parental Controls To perform an Auto Channel Scan: 1. From the CHANNELS menu, highlight Find Channels, and press OK. The auto channel scan begins. 2. Wait until the channel scan is is entered using the Number Pad. If you wish to completely block a channel from being viewed, use the parental controls. See Locking and Unlocking Channels. To remove a channel:

100% complete. Highlight Done and press OK. 3. Press the Exit button on the remote. If the channel scan is cancelled, the channels that were already discovered are retained. A new channel scan will clear all channels. Find Channels Channels Found Digital Analog 45% Complete Cancel Back 1. From the CHANNELS menu, highlight Skip Channel, and press OK. The SKIP CHANNEL menu is displayed. 2. For each channel you wish to remove, use the Up/Down Arrow buttons on the remote to highlight the channel and press OK. A ✓ appears to the right of each channel you select. 3. When you have selected all of the channels you wish to remove, press the Exit button on the remote. Skip Channels 0 Test 0 1 Test 1 2 Test 2 3 Test 3 4 Test 4 Back 25

3 LISTENING TO ALTERNATE AUDIO To use the Digital Language feature:

Changing the Analog Audio Language Some analog over-the-air (free) and cable channels broadcast programs in more than one language. The TV’s Analog Audio feature allows you to listen to audio in an alternate language using Secondary Audio Programming (SAP). Not all programs are broadcast in SAP. The Analog Audio Language feature only works when the program being viewed is being broadcast with Secondary Audio Programming. To use the Analog Audio feature: 1. From the CHANNELS menu, highlight Digital Audio and press OK. The DIGITAL LANGUAGE menu is displayed. 2. Select your preferred language: English, Spanish/Video Description, French. Press OK. 3. Press the Exit button on the remote. Digital Audio English Spanish/ Video Description French Back

1. From the CHANNELS menu, highlight Analog Audio and press OK. The ANALOG AUDIO menu is displayed. 2. Select Stereo, SAP (secondary audio programming), or Mono. Press OK. 3. Press the Exit button on the remote. Analog Audio Stereo SAP Mono Back 26 3 PARENTAL CONTROLS Enabling or Disabling Program Ratings Blocking and Unblocking Content by Rating Using Parental Controls The TV’s parental controls allow you to prevent the TV from displaying certain channels or programs without a password. The PARENTAL CONTROLS menu only appears when: • You are using the tuner to receive your TV signals, such as when you are using an antenna for Over-the-Air signals or when connected to cable TV directly from the wall (no cable box). • You have a device connected using a composite video cable or a coaxial cable, such as a VCR, satellite or cable box, or DVR. Accessing the Parental Controls Menu To access the PARENTAL CONTROLS menu: 1. Press the Menu button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight Channels and press OK. The CHANNELS menu is displayed. 3. Use the Arrow buttons on the remote to highlight Parental Controls and press OK. 4. Enter your set System PIN. To set a custom parental passcode, see Setting a System PIN. To manage program content according to its rating, you must enable the Program Rating feature. To enable or disable the Program Rating feature: 1. From the PARENTAL CONTROLS menu, highlight Locks and press OK. The LOCKS menu is displayed. 2. Select On or Off and press OK. Locking and Unlocking Channels When a channel is locked, it will be inaccessible. Locking a channel is a good way to prevent children from viewing inappropriate material. To lock or unlock a channel: 1. From the PARENTAL CONTROLS menu, highlight Channel Locks and press OK. The CHANNEL LOCKS menu is displayed. 2. Highlight the channel you want to lock or unlock and press OK. 3. When a channel is locked, the Lock icon appears locked. The channel is not accessible unless the parental PIN is entered. 4. When a channel is unlocked, the Lock icon appears unlocked. The channel is accessible. A channel may sometimes broadcast programs that are meant for children, and at other times broadcast programs that are meant for mature audiences. You may not want to block the channel completely using a channel lock, but you may wish to block certain programs from being viewed. When this is the case, you can use the TV’s Rating Block feature to block content based on its rating. For a list of content ratings and their definitions, visit tvguidelines.org. To block or unblock content by its rating: 1. From the PARENTAL CONTROLS menu, highlight the content type you want to adjust and press OK: USA TV - USA television program broadcasts. USA Movie - USA movie broadcasts. Canadian English - Canadian English television program broadcasts. Canadian French - Canadian French television program broadcasts. 2. For each rating type you want to block or unblock, use the Up/Down and Left/Right Arrow buttons on the remote to highlight the rating type and press OK. 3. When the rating type is blocked, the Lock icon appears locked. Content with this rating and all higher ratings cannot be viewed. 4. When the rating type is unblocked, the Lock icon appears unlocked. Content with this rating and all lower ratings can be viewed. If you want to block all unrated content, highlight Block Unrated Shows and use the Arrow buttons on the remote to select On. 5. When you are finished adjusting the rating level blocks, press the Exit button on the remote. 27 SETTING UP CLOSED CAPTIONING Your TV can display closed captions for programs that include them. Closed captions display a transcription of a program’s dialogue. If the program you are viewing is not being broadcast with closed captions, the TV will not display them. The Closed Captions menu does not appear when an HDMI input is selected. Changing the Appearance of Digital Closed Captions Digital closed captions can be displayed according to your preference. See the diagram on the next page for an explanation of the parts of the closed caption area. To change the appearance of digital closed captions: 1. From the CLOSED CAPTIONS menu, use the Arrow buttons to highlight Digital Style and press OK. 2. Use the Left/Right Arrow 3 • Background Color - Change the color of the background directly behind the text. • Background Opacity - Change the transparency of the background directly behind the text. • Window Color - Change the color of the closed captioning box. • Window Opacity - Change the opacity of the closed captioning box. 4. When you are satisfied with the appearance of the closed captions, press the Exit button on the remote.

buttons on the remote to select Digital Style Back

To activate or deactivate closed captions: 1. Press the Menu button on the Custom. The DIGITAL STYLE menu appears as shown. 3. Use the Up/Down Arrow Text Style As Broadcast Test Size Large Text Color Blue

remote. The on-screen menu is displayed. Closed Captions Back buttons on the remote to Text Opacity As Broadcast Text Edges As Broadcast

2. Use the Arrow buttons on the remote to highlight Closed Captions and press OK. The CLOSED CAPTIONS menu is displayed. 3. Use the Arrow buttons on the remote to highlight Closed Captions and then use the Left/ Right Arrow buttons to select On or Off. 4. Use the Arrow buttons on the remote to highlight either Closed Captions Off Analog Closed Captions CC1 Digital Closed Captions CS1 Digital Style highlight the setting you wish to change, then use the Left/Right Arrow buttons to change the setting: • Caption Style - Choose As Broadcast to keep default settings or Custom to manually change each setting. • Text Style - Change the font used for the closed captioning text. Text Edges Color As Broadcast Background Color As Broadcast Background Opacity As Broadcast Window Color As Broadcast Window Opacity As Broadcast

Analog or Digital Closed Captions. 5. Use the Left/Right Arrow buttons on the remote to select the caption channel you wish to display, then press Exit. • Text Size - Make the text larger or smaller. • Text Color - Change the color of the text. • Text Opacity - Change the transparency of the text. • Text Edges - Change the effects at the edges of the text, such as raising the edges or adding drop shadows. • Text Edges Color - Change the color of the text edge effects. 28

3 Typical choices include:

• Opaque background, transparent window—Only a strip of background appears behind the text, expanding as the text appears. This is the typical "As Broadcast" mode. • Opaque background and window in the same color—When text appears, the entire line fills with color at once. In the example below, the closed caption text is green, the background is black, and the window is red. Text Background

CLOSED CAPTION TEXT SAMPLE 29 Window CLOSED CAPTIONS SCREEN LAYOUT

3 RENAMING DEVICES ON THE INPUT MENU

You can rename the inputs to make them easier to recognize on the INPUT menu. For example, if you have a DVD player connected to the Component input, you can rename that input to display “DVD Player.” See Changing the Input Source. To change the name of an input: 1. Press the Menu button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight Input Settings and press OK. The INPUT SETTINGS menu is displayed. 3. Highlight the input device that you want to rename and press OK. 4. To use a preset input name: a. Highlight the Input Port row and press OK. b. Highlight the input name you want to use and press OK. —or— To enter a custom name: a. Enter your custom label using the on-screen keyboard. b. Highlight OK and press OK. c. The Input Name changes to show the custom name that you created. 5. When you have finished naming your input, press the Exit button on the remote. Input Port Name Input Back HDMI-1 DVD My DVD Picture Size Picture Position Enter a custom name for HDMI-1. 30 Input Name Custom Name 3 CHANGING THE TV SETTINGS Viewing System Information Changing the On-Screen Menu Language

Using the SYSTEM menu, you can: • Check for updates • View system information System Check for Updates To view technical data and status information about your TV and network connection: Back 1. Press the Menu button on the remote. The on-screen menu is displayed. Your TV can display the on-screen menu in different languages. To change the on-screen menu language: 1. Press the Menu button on the

• Change the on-screen menu language • Set time zone and local settings • Adjust the CEC settings • Adjust when the power indicator is illuminated • Adjust to preserve Aspect Ratio or fill the screen • Name TV • Check for updates and download available updates • Adjust accessibility settings • Reset the TV settings & set up administrative controls System Information Menu Language English Time & Local Settings CEC Power Mode Quick Start Aspect Ratio Normal TV Name Office TV Mobile Devices Accessibility Reset and Admin 2. Use the Arrow buttons on the remote to highlight System and press OK. The SYSTEM menu is displayed. 3. Highlight System Information and press OK. 4. Use the Up/Down Arrow buttons to scroll through the system information. 5. When you are finished reviewing the system information, press the Exit button on the remote. remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight System and press OK. The SYSTEM menu is displayed. 3. Use the Arrow buttons on the remote to highlight Menu Language and press OK. The MENU LANGUAGE menu is displayed. 4. Highlight your preferred language (English, Español, or Français) and press OK. 5. Press the Exit button on the remote. Menu Language English Español FranÇais Select the menu language. Back 31

3 Setting the Time and Local Settings Adjusting the CEC Settings Turning the Power Indicator On or Off To ensure the correct time is displayed when you press the Info button, set the TV’s time zone: 1. Press the Menu button on the The CEC function on your TV enables you to control devices connected to HDMI (ARC) input with the included remote, without any programming. Using CEC, your VIZIO TV remote can control: The Power Indicator on the front of your TV normally does not glow when the TV is on. You can change this setting if you prefer the light to be on.

remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight System and press OK. The SYSTEM menu is displayed. 3. Use the Arrow buttons on the remote to highlight Time & Local Settings and press OK. The menu headed by the local date and time is displayed. 4. Highlight Time Zone and press OK. The TIME ZONE menu is displayed. Time and Local Settings v June 11, 2015 11:48AM Time Zone Pacific (-8) Daylight Savings Time Auto Time Format Country USA • Power On/Off Back • Volume • Mute Not all HDMI devices support CEC. See your device’s user manual for details. To enable, disable, or adjust CEC settings: 1. Set up your audio device and connect it to the HDMI-1(HDMI Arc) input on the TV 2. On your audio device, select the HDMI ARC input. 3. Press the Menu button on the remote. The on-screen menu is displayed. To turn the Power Indicator Light On or Off: 1. Press the Menu button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight System and press OK. The SYSTEM menu is displayed. 3. Use the Arrow buttons on the remote to highlight RESET & ADMIN and press OK. The RESET & ADMIN menu is displayed. 4. Highlight Power Indicator and press OK. 5. Use the Up/Down Arrow buttons to select On or Off, then press OK.

5. Highlight your time zone and press OK. 6. Highlight Daylight Saving Time and press OK. The DAYLIGHT SAVING TIME menu is displayed. Choose On if it is currently Daylight Savings Time, Off if it is Standard Time, or Auto to have the system automatically detect Daylight Savings Settings. 7. Press the Exit button on the remote. 4. Use the Arrow buttons on the remote to highlight System and press OK. The SYSTEM menu is displayed. 5. Use the Arrow buttons on the remote to highlight CEC and press OK. The CEC menu is displayed. 6. Highligh CEC and press OK. Select a setting and then press OK. • CEC - To use CEC, you must select Enable. • Device Discovery - To determain if your device is connected and supports CEC, select Device Discovery and then press OK. 7. Press the Exit button on the remote. 32

3 Changing the Display Name Naming your TV helps differentiate it from other cast devices you may have in your home. To view your TV name: 1. Press the Menu button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight System and press OK. The SYSTEM menu is displayed. 3. Use the Arrow buttons on the remote to highlight TV Name and press OK. The Display Name is displayed. 4. Enter your custom name using the on-screen keyboard. 5. Press the Exit button on the remote. Display Name Back Living Room Family Room a b c d e f g h i j k l m n o p q r s t u v w x y z 0 1 2 3 4 5 6 7 8 9 .@# äêí Space OK Cancel 33

3 ACCESSIBILITY SETTINGS USING THE RESET & ADMIN MENU Restoring the TV to Factory Default Settings VIZIO is committed to providing intuitive, user-friendly products. Your new VIZIO TV offers several accessibility features that can help you get the most out of it. To access the ACCESSIBILITY menu: You can use the TV’s RESET & ADMIN menu to restore the TV to its factory default settings as well as access other system settings. Using the RESET & ADMIN, you can: • Reset the TV to factory All of the on-screen menu settings can be reset to the factory defaults. If you restore the TV to the factory default settings, all changes you have made to the settings will be lost!

1. Press the Menu button on the remote control. 2. Use the Arrow and OK buttons Accessibility Back settings • Force the system to power off and on Reset & Admin Reset to Factory Defaults Soft Power Cycle This includes any wireless or picture settings. Back To restore the TV to its factory default settings:

to navigate and select System 🡪 Accessibility. 3. Talk Back - Turn Text-to-Speech Talk Back On or Off. Text-to-Speech Talk Back enables your TV to speak all settings changes and adjustments using the remote in English. 4. Speech Rate* - Adjusts the rate in which Text-to-Speech is spoken. Select Slow, Normal (Default), or Fast. 5. Zoom Mode - Enlarges a section of the screen by approximately 200%. To access the Closed Caption** menu: Talk Back Off Speech Rate Normal Zoom mode Off • Create a system pin code to lock content and picture settings • Enable or disable program offers and suggestions • Enable or disable anonymous debug data for system performance. • Start or stop the Store Demo Mode Power Indicator On System PIN Code USB Power Always On Viewing Data On VIZIO Privacy Policy Store Demo 1. Press the Menu button on the remote. The on-screen menu is displayed. 2. Use the Arrow buttons on the remote to highlight System and press OK. The SYSTEM menu is displayed. 3. Highlight Reset & Admin and press OK. The RESET & ADMIN menu is displayed. 4. Highlight Reset to Factory Defaults and press OK. If you have changed the set system PIN, enter it now. The TV displays, “Select Reset to restore all TV settings to factory defaults and clear all account information.” 5. Highlight Reset and press OK. 6. Wait for the TV to turn off. The TV will turn back on shortly afterward and the Setup App will begin.

• Press the Menu button on the remote control. • Use the Arrow and OK buttons to navigate and select Closed Captions. To access the Video Description** menu: • Press the Menu button on the remote control. • Use the Arrow and OK buttons to navigate and select Settings 🡪 Channel 🡪 Digital Audio 🡪 Spanish/ Video Description. 34

SET SYSTEM PIN You can set a System Pin to use: 1. Picture mode lock 2. Parental controls 3. Reset to TV to factory default setting The first time you select System PIN code, you will enter a PIN. The next time you open System PIN code you can reset your PIN code. System PIN code Back Change the PIN used for the System PIN. New PIN Confirm PIN Cancel Enter the 4-digit PIN using the numbers keys on the remote. 3 ABOUT VIEWING DATA Video ACR collects data related to publicly available content displayed on your television/display, such as the identity of your broadcast, cable, or satellite television provider, and the televi- sion programs and commercials viewed (including time, date, channel, and whether you view them live or at a later time). We also collect unique identifiers about this TV, including the IP ad- dress. This data is collectively referred to as “Viewing Data.” For more information about Viewing Data and how VIZIO protects its customers’ privacy, please consult our privacy policy at vizio.com/privacy. When ACR collection is turned on, we may share Viewing Data with authorized data partners including analytics companies, media companies and advertisers. VIZIO and its authorized data partners use Viewing Data to generate summary analysis and reports of how users engage with content on their TVs and other devices. VIZIO Viewing Data is sometimes enhanced with house- hold demographic data and data about digital actions (e.g. digital purchases and other consumer behavior taken by devices asso- ciated with the IP Address we collect). Viewing Data also enables our authorized data partners to deliver advertising relevant to your profile that you might find useful, both on the VIZIO TV/ display and other devices sharing your IP Address. Viewing Data is also used to help content publishers, broadcasters or content distribution services create or recommend more relevant enter- tainment based on summary insights, as well as helps us improve the design of our products, software and services. You can easily turn this feature On or Off in the RESET & ADMIN menu. If you have trouble enabling or disabling Viewing Data, please contact VIZIO customer service by emailing techsupport@ vizio.com or calling (855) 472-8817. For more information, see vizio.com/viewingdata and review VIZIO’s privacy policy at vizio.com/privacy 35

3 USING THE INFO WINDOW The Info Window can be displayed by pressing the Info button on the remote: • Press the Info button one time to display the TV name, current input, picture mode, network name, and time. Current Input Network Name Picture Mode

TV Name Living Room HDMI-1 Wide HomeNetwork 5:00 pm Time 36 INFO WINDOW

SmartCast TV 4

What is SmartCast TVSM? SmartCast TV lets you discover, stream, and control your content like never before. Access top apps like Netflix more easily, using the included remote to browse and launch content directly from the big screen. SmartCast TV makes finding something to watch more fun - discover new shows including movies in 4K UHD and Dolby Vision HDR. Plus, you can quickly set up and adjust settings right on the TV using the included remote control. What can you do with SmartCast TV: • Browse and launch top tier apps directly from the big screen using the included remote. • Stream content directly from the home screen with a single button press. • Stream high quality entertainment in Full HD. • Initiate a stream with the included IR remote, pause with mobile app, continue controlling with voice via Google Home. How to Launch SmartCast TV To launch and begin streaming with SmartCast TV: • Press the V-Logo button ( ) on your remote -OR- • Select SmartCast from the list of inputs. 1 2 4 3 5 1. Marquee Content Carousel 2. Discover - New or popular content across multiple apps, including 4k HDR content 3. Streaming Apps 4. Quick Access to Popular Apps 5. V-Key - Lauch SmartCast TV with one click 37

Playing USB Media 4

Displaying USB Media Connect a USB thumb drive to your TV to play videos. Preparing Your USB Drive to Play USB Media To TV USB media, you must first save your videos onto a USB thumb drive: • The USB thumb drive must be formatted as FAT32. • Files on the USB thumb drive must end in a supported file extension ( .mp4 only). • The player is not designed to play media from external hard drives, MP3 players, cameras, or smartphones. Displaying USB Media To display your USB media: 1. Connect your USB thumb drive to the USB port on the side of the TV. 2. The TV will recognize the USB stick and begin playing conent on its own. -OR Select USB from the bottom streaming icons on the SmartCast Homepage. You can display your photos in Fullscreen. Select the photo, press OK, then highlight Fullscreen and press OK. Removing the USB Drive from the TV To safely remove your USB drive from the TV: 1. Turn off the TV. 2. Disconnect your USB thumb drive from the USB port on the side of the TV. Do not remove the USB thumb drive while the TV is on. Doing so may damage the drive.

Note: The image shown here is for illustrative purposes only and may be subject to change. The actual number of ports and their locations may vary, depending on the model. 38

Connected Sources displays connected USB devices. Current Folder Playback Controls Use to control audio playback. Highlight Play/ Back Button Highlight this button and press OK to return to the previous screen. VIZIO Music USB1: MyFlashDrive My Music Now Playing Information displays song title, album title, and artist name. Progress Bar displays the duration of the current ly-playing song. The blue bar will lengthen as the song progresses. Fab Apple Dream On The Answer Is Yes By Ana Banana 5:50 8:46 MyFlashDrive\Audio\root\My Music Track Album Artist Duration # Starry Summer Summer Mix JCheesy 2:42 1 2 Downspin JCheesy 6:20 Summer Mix 3 Mango Dream Ana Banana 8:46 Beach Mix Crystal Waters The Dash 4:21 4 Beach Mix Smooth Waves Rio Steve 7:58 5 Breezy Mix 4 Album Art If included on the USB thumb drive and associated with your music, the album art will display here.

Pause, Previous, or Next and press OK. Toggle Music/Photos Sort by Album/Artist/ Track Sort: View: Browse Photos Artist A-Z All Page 1 of 1 Folder Contents/ Playlist This area displays the contents of the currently selected folder. You can browse files and folders using the Arrow and OK buttons on the remote.

Toggle between viewing all content and only viewing folders. MUSIC PLAYER Page Information If your USB thumb drive has more files than can be displayed on a single screen, the page information is displayed here. 39

Connected Sources displays connected USB devices. Current Folder Back Button Highlight this button and press OK to return to the previous screen. VIZIO Video USB1: MyFlashDrive My Videos 4 MyFlashDrive\Video\root\My Videos # File Date Duration 1 Family Vacation - California - 00:23:43 2 26th Birthday Party - 00:38:18 3 Japan 2017 - 00:41:08 4 Aby’s Graduation - 00:05:32 Folder Contents/ Playlist This area displays

Sort by Date or File Name Sort: View: Date New-Old Folders Page 1 of 1 the contents of the currently selected folder. You can browse among files using the Arrow and OK buttons on the remote.

View All or View Folders VIDEO PLAYER Page Information If your USB thumb drive has more files than can be displayed on a single screen, the page information is displayed here. 40

Connected Sources Back Button Highlight this button and press OK to return to the previous screen. VIZIO Back Button Highlight and press OK to return to left column. Current Folder TVs the folder path. 4 Folder Contents This area displays the contents of the currently selected folder. You can browse files and folders using the Arrow and OK buttons on the remote.

displays connected USB devices. Current Folder Start Fullscreen Slideshow Sort by Date or File Name View Thumbnails/Folders USB1: Sort: View: Photo VIZIO_2GB\Photo\root A.jpg root B.jpg C.jpg Start Slideshow Name A-Z Thumbnails Adjust Slideshow Settings Settings D.jpg E.jpg F.jpg

Browse Music View Music Files File Name: D 1920x1080 Resolution: 1920x1080 Size: 1607270KB Photo Information displays the name, resolution, and file size of the selected photo. G.jpg H.jpg I.jpg Page 1 of 1 Page Information If your USB thumb drive has more files than can be displayed on a single screen, the page information is displayed here. PHOTO VIEWER 41

Troubleshooting & Technical Support A Do You Have Questions? Find Answers At SUPPORT.VIZIO.COM Find help with: • New Product Setup • Connecting Your Devices • Technical Problems • Product Updates • And More Live Chat Support Available You can also contact our award-winning support team at: Phone: (877) 698-4946 (TOLL-FREE) 42 A Take A Moment To Register Your Product At VIZIO.COM/PRODUCT-REGISTRATION Why Register? Customized Support Get assistance quickly with your information on-hand. News & Offers Take advantage of the latest news and special offers from VIZIO. Safety & Satisfaction Stay up to date with important product updates and notifications. REGISTER YOUR VIZIO PRODUCT NOW 43

HELP TOPICS The remote is not responding. There is no sound. A The image quality is not good. • Make sure the batteries are properly inserted matching the - and + symbols. • Replace the batteries with fresh ones. The TV displays “No Signal.” • Press INPUT button on the remote control to select a different input source. • If you are using cable TV or antenna connected directly to the TV, scan for channels. See Scanning for Channels. There is no power. • Ensure the TV is plugged into a working electrical outlet. • Ensure the power cable is securely attached to the TV. • Press the Power/Standby button on the remote or on the back of the TV to turn the TV on. The power is on, but there is no image on the screen. • Ensure all cables are securely attached to the TV. • Ensure all devices are connected correctly. Devices differ; see your device’s user manual for details. • Adjust Brightness, Contrast, or Backlight. See Adjusting the Picture Settings. • Press the INPUT button on the remote to select a different input source. • Press Volume Up on the remote control. • Press the MUTE button on the remote to ensure mute is off. • Check the audio settings. See Adjusting the Audio Settings. • Check the audio connections of external devices (Blu-ray player, game console, cable/satellite box) that are connected to the TV. • If you are using an antenna, the signal strength of the channel may be low. Ensure your antenna is connected securely to the TV and move the antenna around the room or close to a window for the best signal. The sound is flat or dialog is not audible. • Turn off Volume Leveling. See Adjusting the Audio Settings. The colors on the TV don’t look right. • Adjust the Color and Tint settings in the Picture menu. See Adjusting the Picture Settings. • Select a pre-set picture mode. See Adjusting the Picture Settings. VIZIO recommends selecting Calibrated. • Check all cables to ensure they are securely attached. The buttons on the remote aren’t working. • Ensure you are only pressing one button at a time. • Point the remote directly at the TV when pressing a button. • Replace the remote batteries with new ones. See Replacing the Batteries. • For the best image quality, view high-definition programs using digital sources. Connect your devices with HDMI cables. • If you are using an antenna, the signal strength of the channel may be low. Ensure your antenna is connected securely to the TV and move the antenna around the room or close to a window for the best signal. The picture is distorted. • Move the TV away from electrical appliances, cars, and fluorescent lights. • Ensure all cables are securely attached. The display image does not cover the entire screen. • If you are using TV, AV, or Component with 480i input, press the button on the remote to change the screen mode. The TV has pixels (dots) that are always dark. • Your HD TV is precision-manufactured using an extremely high level of technology. However, sometimes pixels may not display correctly. These types of occurrences are inherent to this type of product and do not constitute a defective product. 44 I see “noise” or static on the screen. • When your TV’s digital capabilities exceed a digital broadcast signal, the signal is up-converted (improved) to match your TV’s display capabilities. This up-converting can sometimes cause irregularities in the image. • If you are using an antenna, the signal strength of the channel may be low. Ensure your antenna is connected securely to the TV and move the antenna around the room or close to a window for the best signal. When I change input source, the display image changes size. • The TV remembers the viewing mode on each input source. If the viewing mode on the new input source differs from the one on the input source you switch from, the difference may be noticeable. • See Changing the Screen Aspect Ratio. How do I download the VIZIO SmartCast™ App? • Make sure your phone or tablet is connected to a Wi-Fi network. Open a browser on your phone or tablet. Navigate to vizio.com/smartcastapp and follow the on-screen instructions to download the VIZIO SmartCast™ App. How do I change the Inputs? • Make sure the VIZIO SmartCast™ App is installed on your phone or tablet. Open the VIZIO SmartCast™ App. Tap on the Device list and select your TV. Tap on the Input key and select the Input of your choice. • Press the Input button on the back of the Display to cycle through the Inputs. • Press the Input button on the basic remote to cycle through the Inputs. How do I connect to my Wi-Fi network? • On your IR remote, press the Menu button then go to Network🡪 Select your Wi-Fi name🡪 Enter password. • Open the VIZIO SmartCast™ App on your phone or tablet. Tap on the device list and select your Display. Tap on the Settings icon🡪 Network 🡪 Wireless Access Points. Select your Wi-Fi network from the list, enter the Wi-Fi password, and tap Connect. A How do I stream apps like Netflix and Youtube to my VIZIO SmartCast™ Display? • Download and open a Chromecast-enabled apps on your mobile device, such as like Netflix or Youtube. Then tap the Cast button. How do I exit Demo Mode • Press and hold the Input button on the back of the Display to exit the demo mode. How do I watch Cable/Antenna TV channels? • If you subscribe to cable or satellite, simply connect an HDMI cable (not included) to the receiver. • If you use external antennas to watch local broadcast channels, a TV tuner is required and is sold separately by third parties. 45

Specifications B M55-F0 M65-F0 M70-F3 Size 55” 65” 70” Viewable Area 54.5” 64.5” 69.5” MOUNTING

Dimensions w/ Stand 48.47“ x 30.30“ x 9.32“ (123.11 cm x 76.97 cm x 23.68 cm) Dimensions w/o Stand 48.47“ x 27.90“ x 2.39“ (123.11 cm x 70.87 cm x 6.08 cm) 57.00“ x 35.24“ x 10.92“ (144.78 cm x 89.51 cm x 27.74 cm) 57.00“ x 32.67“ x 2.39“ (144.78 cm x 82.99 cm x 6.08 cm) 61.15” x 38.10” x 12.22” (155.32 cm x 96.77 cm x 31.04 cm) 61.15” x 35.35” x 2.39” (155.32 cm x 89.79 cm x 6.07 cm)

Weight w/ Stand 35.68 lb (16.20 kg) 52.86 lb (24.00 kg) 58.49 lb (26.53 kg) Weight w/o Stand 35.02 lb (15.9 kg) 51.98 lb (23.6 kg) 57.63 lb (26.14 kg) Mounting Screw Size M6 M6 M6 Hole Pattern 200 mm x 200 mm 400 mm x 200 mm 400 mm x 400 mm PICTURE QUALITY Maximum Resolution 3840 x 2160 (UHD) 3840 x 2160 (UHD) 3840 x 2160 (UHD) LCD Backlight Full Array LED Full Array LED Full Array LED Refresh Rate 240 Hz (effective refresh rate) 240 Hz (effective refresh rate) 120 Hz (effective refresh rate) Dynamic Contrast Ratio 20M:1 20M : 1 20M:1 INPUTS / OUTPUTS HDMI Inputs 4 4 4 Component Video Inputs 1 (Shared with composite) 1 (Shared with composite) 1 (Shared with composite) Ethernet Input 1 1 1 RF Atenna Input 1 1 1 USB 1 1 1 Audio Output HDMI ARC, RCA, Digital Optical HDMI ARC, RCA, Digital Optical HDMI ARC, RCA, Digital Optical OTHER Remote Control Model XRT136 XRT136 XRT136 Power Consumption 165W 102.8W 173W Standby Power <0.5W <0.5W <0.5W Voltage 120V 120V 120V OSD Language English, French, Spanish English, French, Spanish English, French, Spanish

Certification UL, cUL, FCC Class B, BETS-7/ICES-003 Class B, IC, HDMI (CEC, ARC) Dolby Audio UL, cUL, FCC Class B, BETS-7/ICES-003 Class B, IC, HDMI (CEC, ARC) Dolby Audio UL, cUL, FCC Class B, BETS-7/ICES-003 Class B, IC, HDMI (CEC, ARC) Dolby Audio

46 Regulatory Information C

FCC Class B Radio Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Notice The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the re sponsibilities of the user to correct such interference. FCC Warning Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user’s authority to operate this equipment. Caution Always use an AC/DC power adapter that is properly grounded. Use the AC cords listed below for each area. Canada Notice for License-Exempt Radio Apparatus This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device operates on a no-protection no-interference basis. Should the user seek to obtain protection from other radio services operating in the same TV bands, a radio license is required. Please consult Industry Canada’s document CPC-2-1-28, Optional Licensing for Low-Power Radio Apparatus in the TV Bands, for details. Cet appareil est conforme aux CNR exempts de licence d’Industrie Canada. . Son fonctionnement est sujet aux deux conditions suivantes: 1. le dispositif ne doit pas produire de brouillage préjudiciable, et 2. ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable Cet appareil fonctionne sur une base sans protection et sans interférence. Dans le cas où l’utilisateur cherche à obtenir de la protection des autres services de radio fonctionnant sur les mêmes bandes TV, aucune license est requise. Veuillez consulter le document CPC-2-1-28 d’Industrie Canada, License optionnelle pour les appareils radio de faible puissance, pour plus de détails. Industry Canada Class B emission compliance statement This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Declaración de México: La operación de este equipo está sujeta a las siguientes dos condiciones: 1. es posible que este equipo o dispositivo no cause interferencia perjudicial y 2. este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada. 47

Limited Warranty D

UNITED STATES AND CANADA BY USING YOUR VIZIO PRODUCT YOU AGREE TO BE BOUND BY ALL THE TERMS OF THIS WARRANTY. BEFORE USING YOUR VIZIO PRODUCT, PLEASE READ THIS WARRANTY CAREFULLY. IF YOU DO NOT AGREE TO THE TERMS OF THIS WARRANTY, DO NOT USE THE VIZIO PRODUCT AND, WITHIN THIRTY (30) DAYS OF THE DATE OF PURCHASE, RETURN IT FOR A REFUND TO THE AUTHORIZED RETAILER WHERE YOU PURCHASED IT. This warranty contains a binding arbitration agreement and a class action waiver for United States residents. If you live in the United States, the binding arbitration agreement and class action waiver affect your rights under this warranty. Please read the text under the section titled “Binding Arbitration Agreement; Class Action Waiver (U.S. Residents Only)” carefully. How Long This Warranty Lasts For non-commercial use, VIZIO warrants the product on the terms set forth below for one (1) year from the date of original purchase. For commercial use, VIZIO warrants this product on the terms set forth below for ninety (90) days from the date of original purchase. What This Warranty Covers VIZIO warrants the product against defects in materials and workmanship when the product is used normally in accordance with VIZIO’s user guides and manuals. Except where restricted by law, this warranty applies only to the original purchaser of a new product. The purchase must have been made from an authorized retailer in the United States (including Puerto Rico) or Canada. The product must also be located in the country where it was purchased at the time of warranty service. Zero Bright Pixel Defect Guarantee (Displays Only) Your product may qualify for a warranty against “zero bright pixel” defects for the duration of the warranty on select new product purchases. To determine if this guarantee applies to your product, refer to the model’s product information page at vizio.com, look for the “zero bright pixel” guarantee on the box, or contact VIZIO Technical Support at the email address or telephone number below. How to Get Service Before obtaining warranty service, you may visit vizio.com for additional help and troubleshooting. To obtain warranty service, contact VIZIO Technical Support via email at TechSupport@VIZIO.com or via phone at 877 MY VIZIO (877-698-4946). Your Obligations Before Service You must obtain pre-authorization before sending your product to a VIZIO service center. You may be required to supply a purchase receipt (or copy) to show that the product is within the warranty period. When you return a product to a VIZIO service center, you must ship the product in its original packaging or in packaging that affords an equal degree of protection. VIZIO Technical Support will provide instructions for packing and shipping the product to the VIZIO service center. ALL USER DATA AND DOWNLOADED APPLICATIONS STORED ON A PRODUCT WILL BE DELETED IN THE COURSE OF SOME IN-HOME AND ALL SHIP-IN WARRANTY SERVICE. If this occurs, your product will be restored to its original state. You will be responsible for restoring all applicable user data and downloaded applications. Recovery and reinstallation of user data and downloaded applications is not covered under this warranty. In order to protect your personal information, VIZIO recommends that you always clear all personal information from the product before it is serviced, regardless of the servicer. VIZIO’s Responsibilities If VIZIO determines that a product is covered by this warranty, VIZIO will (at its option) repair or replace it, or refund the purchase price to you. There will be no charge for parts or labor during the warranty period. Replacement parts may be new or recertified at VIZIO’s option and sole discretion. Replacement parts and VIZIO’s labor are warranted for the remaining portion of the original warranty or for ninety (90) days from warranty service, whichever is longer. Types of Service TVs that are 32 inches or larger will usually be serviced in-home. In-home service requires complete and easy access to the product and does not include de-installation or re-installation of the product. In-home service is subject to availability. VIZIO will provide other service options when in home service is not available. All other VIZIO products must be sent to a VIZIO service center to obtain warranty service. VIZIO is not responsible for transportation costs to the service center, but VIZIO will cover return shipping to the customer. What This Warranty Does Not Cover This warranty does not cover: (a) cosmetic damage; (b) normal wear and tear; (c) improper operation; (d) improper voltage supply or power surges; (e) signal issues; (f) damage from shipping; (g) acts of God; (h) customer misuse, modifications or adjustments; (i) installation, set-up, or repairs attempted by anyone other than by a VIZIO authorized service center; (j) products with unreadable or removed serial numbers; (k) products requiring routine maintenance; or (l) products sold “AS IS”, “CLEARANCE”, “FACTORY RECERTIFIED”, or by a non-authorized reseller. What to Do If You Are Not Satisfied With Service If you feel VIZIO has not met its obligations under this warranty, you may attempt to resolve the issue informally with VIZIO. If you are unable to resolve the issue informally and wish to file a formal claim against VIZIO, and if you are a resident of the United States, you must submit your claim to binding arbitration according to the procedures described below, unless an exception applies. Submitting a claim to binding arbitration means that you do not have the right to have your claim heard by a judge or jury. Instead your claim will be heard by a neutral arbitrator. Binding Arbitration Agreement; Class Action Waiver (U.S. Residents Only) UNLESS YOU HAVE BROUGHT AN ELIGIBLE CLAIM IN SMALL CLAIMS COURT OR HAVE OPTED OUT AS DESCRIBED BELOW, ANY CONTROVERSY OR CLAIM RELATING IN ANY WAY TO YOUR VIZIO PRODUCT, INCLUDING ANY CONTROVERSY OR CLAIM ARISING OUT OF OR RELATING TO THIS WARRANTY, A BREACH OF THIS WARRANTY, OR THE VIZIO PRODUCT’S SALE, CONDITION OR PERFORMANCE, WILL BE SETTLED BY BINDING ARBITRATION ADMINISTERED BY THE AMERICAN ARBITRATION ASSOCIATION AND CONDUCTED BY A SINGLE ARBITRATOR APPOINTED BY THE AMERICAN ARBITRATION ASSOCIATION, IN ACCORDANCE WITH ITS COMMERCIAL ARBITRATION RULES AND ITS SUPPLEMENTARY PROCEDURES FOR CONSUMER-RELATED DISPUTES. You may learn more about the American Arbitration Association and its rules for arbitration by visiting adr.org or by calling 800-778-7879. Since this warranty concerns a transaction in interstate or international commerce, the Federal Arbitration Act will apply. The filing fees to begin and carry out arbitration will be shared between you and VIZIO, but in no event will your fees ever exceed the amount allowable by the American Arbitration Association, at which point VIZIO will cover all additional administrative fees and expenses. VIZIO waives its right to recover attorneys’ fees in connection with any arbitration under this warranty. If you are the prevailing party in an arbitration to which 48

D the Supplementary Procedures for Consumer-Related Disputes applies, maximum extent not prohibited by law.

then you are entitled to recover attorneys’ fees as the arbitrator may determine. The dispute will be governed by the laws of the state or territory in which you resided at the time of your purchase (if in the United States). The place of arbitration will be Irvine, California, or your county of residence (if in the United States). The arbitrator will have no authority to award punitive or other damages not measured by the prevailing party’s actual damages, except as may be required by statute. The arbitrator will not award consequential damages, and any award will be limited to monetary damages and will include no equitable relief, injunction, or direction to any party other than the direction to pay a monetary amount. Judgment on the award rendered by the arbitrator will be binding and final, except for any right of appeal provided by the Federal Arbitration Act, and may be entered in any court having jurisdiction. Except as may be required by law, neither you nor VIZIO nor an arbitrator may disclose the existence, content, or results of any arbitration under this warranty without the prior written consent of you and VIZIO. ANY DISPUTE, WHETHER IN ARBITRATION, IN COURT, OR OTHERWISE, WILL BE CONDUCTED SOLELY ON AN INDIVIDUAL BASIS. VIZIO AND YOU AGREE THAT NO PARTY WILL HAVE THE RIGHT OR AUTHORITY FOR ANY DISPUTE TO BE ARBITRATED AS A CLASS ACTION, A PRIVATE ATTORNEY GENERAL ACTION, OR IN ANY OTHER PROCEEDING IN WHICH EITHER PARTY ACTS OR PROPOSES TO ACT IN A REPRESENTATIVE CAPACITY. NO ARBITRATION OR PROCEEDING WILL BE JOINED, CONSOLIDATED, OR COMBINED WITH ANOTHER ARBITRATION OR PROCEEDING WITHOUT THE PRIOR WRITTEN CONSENT OF ALL PARTIES TO ANY SUCH ARBITRATION OR PROCEEDING. Exceptions to Binding Arbitration Agreement and Class Action Waiver IF YOU DO NOT WISH TO BE BOUND BY THE BINDING ARBITRATION AGREEMENT AND CLASS ACTION WAIVER, THEN: (1) you must notify VIZIO in writing within sixty (60) days of the date that you purchased the product; (2) your written notification must be mailed to VIZIO at 39 Tesla, Irvine, CA 92618, Attn: Legal Department; and (3) your written notification must include (a) your name, (b) your address, (c) the date you purchased the product, and (d) a clear statement that you wish to opt out of the binding arbitration agreement and class action waiver. In addition, you may pursue a claim in small claims court in your county of residence (if in the United States) or in Orange County, California. In such case the provisions of the section titled “Binding Arbitration Agreement; Class Action Waiver (U.S. Residents)” will not apply. Exclusions and Limitations TO THE GREATEST EXTENT PERMITTED BY APPLICABLE LAW, THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE DESCRIBED ABOVE. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WILL BE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE. SOME STATES AND PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. VIZIO WILL NOT BE RESPONSIBLE FOR LOSS OF USE, LOSS OF INFORMATION OR DATA, COMMERCIAL LOSS, LOST REVENUE OR LOST PROFITS, OR OTHER INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES, EVEN IF VIZIO HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND EVEN IF THE REMEDY FAILS OF ITS ESSENTIAL PURPOSE. SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. IN LIEU OF ANY OTHER REMEDY FOR ANY AND ALL LOSSES AND DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER (INCLUDING VIZIO’S NEGLIGENCE, ALLEGED DAMAGE, OR DEFECTIVE GOODS, NO MATTER WHETHER SUCH DEFECTS ARE DISCOVERABLE OR LATENT), VIZIO MAY, AT ITS SOLE AND EXCLUSIVE OPTION AND IN ITS DISCRETION, REPAIR OR REPLACE YOUR PRODUCT, OR REFUND ITS PURCHASE PRICE. AS NOTED, SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. How the Law Applies This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state and province to province. This warranty applies to the greatest extent permitted by applicable law. General No employee or agent of VIZIO may modify this warranty. If any term of this warranty, other than the class action waiver, is found to be unenforceable, that term will be severed from this warranty and all other terms will remain in effect. If the class action waiver is found to be unenforceable, then the entire section titled “Binding Arbitration Agreement; Class Action Waiver (U.S. Residents Only)” will not apply. This warranty applies to the Changes to Warranty This warranty may change without notice, but any change will not affect your original warranty. Check vizio.com for the most current version. 49

Legal Information D

Software Licenses All software is provided subject to a software license agreement(s) and you agree that you will be bound by such license agreement(s) in addition to these terms. Your use of this product is subject to VIZIO’s privacy policy, which may be updated from time to time, and is available to view at vizio.com/privacy. Export Regulations Customer acknowledges that the VIZIO products, which include technology and software, are subject to customs and export control laws in the United States (“US”). The products may also be subject to the customs and export control laws and regulations of the country in which the products are manufactured and/or received. Internet Connectivity Network conditions, environmental and other factors may negatively affect connectivity and the resulting video quality, if any. The applications and content of the applications pictured herein or described in accompanying documentation may only be available in certain countries or languages, may require additional fees or subscription charges, and may be subject to future updates, modifications or discontinuation without notice. VIZIO has no control over third party applications or content and assumes no responsibility for the availability or interruption of such applications or content. Additional third party terms, conditions and restrictions apply. A Google account is required to download applications from the Google Play store. A MyVIZIO account is required to access certain features of the VIZIO SmartCast™ App. Information in this User Manual is subject to change without notice. To review the most updated version of this User Manual and the associated Quick Start Guide, go to vizio.com. © 2017 VIZIO, Inc. All Right Reserved. This User Manual may not be copied in whole or in part without the written permission of VIZIO, Inc. VIZIO, Inc. has made reasonable efforts to ensure the accuracy of the information provided herein. All product specifications, functionality, features, configurations, performance, design and other product information described herein are subject to change without notice. VIZIO, Inc. is not responsible for typographical, technical, or descriptive errors. VIZIO, the VIZIO logo, the V logo, and other terms and phrases are trademarks or registered trademarks of VIZIO, Inc. HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC. For DTS patents, see patents.dts.com. Manufactured under license from DTS, Inc. DTS, the Symbol, DTS and the Symbol together, and DTS Studio Sound II are registered trademarks and/or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved. Dolby, Dolby Audio, Dolby Vision, and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license from Dolby Laboratories. Confidential unpublished work. Copyright © 2013- 2015 Dolby Laboratories. All rights reserved. © 2017 Google Inc. All rights reserved. Google Cast is a trademark of Google Inc. Other names of companies, products, and services used in this User Manual may be trademarks, trade names or service marks of others and VIZIO, Inc. disclaims any interest in trademarks, trade names or service marks other than its own. Mention of non-VIZIO products is for informational purposes only. Caution: Avoid exposing a drive to magnetic fields. Security devices with magnetic fields may include airport walk-through devices and security wands. Airport conveyor belts or similar security devices that check carry-on luggage generally use X-rays and should not cause magnetic damage to drives. If you are traveling internationally, check the customs regulations for device use for each country you will visit, and check the power cord and adapter requirements for each location in which you plan to use the display as voltage, frequency and plug configurations may vary. Warning: To reduce risk of electric shock, fire or damage to your device or other property, do not attempt to power the device with a voltage converter kit sold for appliances. Battery Disposal Caution: This product may be shipped with batteries. Do not dispose of batteries in a fire or with ordinary household waste. Batteries may explode and can cause damage. Replace batteries only with the same or equivalent type of battery recommended by VIZIO. The disposal of batteries may be regulated by your state. Please always check with your state to determine the how to properly dispose of your batteries. Product Recycling The disposal and recycling of consumer electronic products may be regulated by your state. Always properly dispose of your VIZIO products in accordance with local laws and regulations. VIZIO supports the proper recycling of our products. For information on how to properly recycle your VIZIO products and to learn more about consumer electronics recycling laws, please go to vizio.com/environment or call (800) 374-3473. Packaging Disposal VIZIO encourages the recycling of the packaging used for this product. Please break-down all boxes and recycle eligible materials according to local laws and regulations. For more information please go to vizio. com/environment or call (800) 374-3473.t. For information on the accessibility features of this product and other VIZIO products please visit: vizio.com/smartcast_tablet_accessibility or Email: Accessibility@vizio.com | Phone: 1-877-698-4746 50

© 2018 VIZIO INC. ALL RIGHTS RESERVED. 180228AD


FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE - USER MANUAL

OWNER GUIDE - OWNER MANUAL

REFERENCE GUIDE - REFERENCE MANUAL

INSTRUCTION GUIDE - INSTRUCTION MANUAL

Leave a Reply