Free English VIXEN VXH2190SS (01) PDF Document. Free English VIXEN VXH2190SS (01) PDF User Guide. Free English VIXEN VXH2190SS (01) PDF User Manual. Free English VIXEN VXH2190SS (01) PDF Owner Guide. Free English VIXEN VXH2190SS (01) PDF Owner Manual. Free English VIXEN VXH2190SS (01) PDF Reference Guide. Free English VIXEN VXH2190SS (01) PDF Instruction Guide. Free English VIXEN VXH2190SS (01) PDF Reference Manual. Free English VIXEN VXH2190SS (01) PDF Instruction Manual. Free English VIXEN VXH2190SS (01) PDF Operating Instructions.
CLICK HERE TO DOWNLOAD VIXEN VXH2190SS (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What is included in the VIXEN VXH2190SS package?
The contents of the VIXEN VXH2190SS package are:
➤ Dual Trumpet Stainless Steel Horn (Chrome Color)
➤ 12V Solenoid with Pre-installed Compression Fitting for 3/8″ OD Hose
➤ 3/8″ OD Air Line
➤ Mounting Hardware
What is the voltage requirement for the VIXEN VXH2190SS horn?
The specific voltage requirement for the VIXEN VXH2190SS horn is 12 volt DC. Therefore, the installation must be done to a DC power source of 12 volts.
What safety precautions should I follow when installing and using the VIXEN VXH2190SS?
Please follow these safety instructions for your VIXEN VXH2190SS:
➤ Avoid dismantling this horn’s electrical elements.
➤ Avoid touching compressor components with your bare hands immediately after or during use.
➤ Avoid setting up any parts of the horn where there is a risk of falling off or risk of coming in contact with water.
➤ Avoid reaching out to touch or pick up any fallen or water submerged parts.
➤ Set the horn up for use only in areas with adequate ventilation.
➤ Avoid sounding the air horn when in close range to your ear(s) or the ear(s) of others.
➤ Make sure your battery ground is detached before getting your installation started.
➤ Employ equipment for eye protection during drill operations.
➤ Ensure that your air system has no pressure before starting the installation.
How should I mount the VIXEN VXH2190SS horn?
To mount your VIXEN VXH2190SS, follow these steps:
➤ Identify a suitable area for mounting, preferably an unobstructed sheet-metal surface like the frame or body of the vehicle so as to provide a firm platform which will help protect the horn from damage due to excessive shaking. Do not attach the horn to any plastic or other flexible material.
➤ Using the back bracket as a guide estimate and mark the positions for the holes, then perforate to size using a drill.
➤ Move the support bracket towards the trumpet’s opening until is tight, then mark the hole and drill.
➤ Use the provided mounting hardware to fasten the horn.
How do I perform the air line installation for the VIXEN VXH2190SS?
Follow these steps for the air line installation:
➤ On one side of the included 3/8″ OD air line, attach the compression nut and force the air line upon the male inlet fitting which is found on the electric solenoid valve.
➤ Pass the brass nut through the inlet fitting and fasten.
➤ Take the air line’s other side and place the compression nut of the air tank fitting on it. Force the air line onto the male fitting of the tank and then fasten the compression nut. WARNING: Avoid tying the brass nut too tight.
How do I complete the electrical connections for the VIXEN VXH2190SS horn?
To wire your VIXEN VXH2190SS, please follow these electrical connection instructions:
➤ Wire one of the solenoid valve’s leads to the positive (+) terminal of the battery or alternator. WARNING: We highly recommend that you use a 10A fuse (not provided) to assure that the circuit remains safe and will not be damaged by excess current.
➤ Wire the other lead of the solenoid valve to one of the terminals on the horn button.
➤ Ground the other terminal on the horn button by wiring it to bare metal.
CLICK HERE TO DOWNLOAD VIXEN VXH2190SS (01) PDF DOCUMENT