Free English VILVA V156F1 (02) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD VILVA V156F1 (02) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What are the functions of the keys and ports on the VILVA V156F1 portable monitor?
The keys and ports on the VILVA V156F1 monitor have the following functions:
1. Mini HDMI: Port for video input.
2. Full Function Type-C Port: Used for power, video, audio, and touch signal.
3. 3.5mm Headphone Jack: Port for audio output.
4. Multi-Function Key:
a. Press in the middle: Deploys the menu.
b. Scroll up/down: Navigates the menu.
5. Power Indicator Light: Shows the power status of the monitor.
6. Power Button:
a. Press the button for 5 seconds: Turns the monitor off.
b. Short press when on the menu: Goes back to the previous step.
How do I connect my VILVA V156F1 monitor to a laptop using the Full Function Type-C Mode?
If your laptop supports USB Type-C 3.1 with PD protocol that can output audio and video or Thunderbolt with a USB-C interface, you can connect the VILVA V156F1 monitor to your laptop using a single USB-C to USB-C 3.1 cable.
How do I connect my VILVA V156F1 monitor for Samsung DEX Mode or Huawei EMUI Mode?
To use Samsung DEX Mode or Huawei EMUI Mode, connect your compatible device to the VILVA V156F1 monitor using a Type-C cable. For power, connect an adapter to the monitor’s Type-C Power port.
How do I connect the VILVA V156F1 monitor to a computer using HDMI?
To connect to a laptop or desktop computer using HDMI:
1. Connect your computer to the monitor’s Mini HDMI port for the video signal.
2. Connect a power source to the monitor’s Type-C Power port.
For a 1080P monitor, the USB 3.0 port on the computer can supply the power. For a 4K monitor, it is recommended to use an extra PD power adapter.
How do I connect my VILVA V156F1 monitor to a PS4, PS5, or XBOX?
1. Connect the console’s HDMI output to the monitor’s Mini HDMI input.
2. Connect a power source to the monitor’s Type-C Power port using an adapter.
The USB 3.0 port on the PS4/PS5/XBOX can supply the power for a 1080P monitor. For a 4K monitor, it is recommended to use an extra PD Power source.
How do I connect my VILVA V156F1 monitor to a Nintendo Switch?
There are two methods to connect your Nintendo Switch:
1. Connect with Switch DOCK:
– Place the Switch in its dock.
– Connect the Switch Dock’s HDMI output to the monitor’s Mini HDMI input.
– Connect an adapter to the monitor’s Type-C Power port for power.
2. Connected with Switch by USB-C to USB-C cable:
– You can connect your Switch directly to the monitor via a USB-C to USB-C 3.1 cable.
– NOTICE: Extra power is required for this method. Use the official Switch Adaptor or another power source of at least 60W, connected to the monitor’s other Type-C port.
How does the Reverse Charging Function work on the VILVA V156F1 portable monitor?
When your VILVA V156F1 monitor is connected to your device (e.g., laptop, phone) via the “Full Function Type-C Mode,” you can charge that device by connecting an external power adapter to the monitor’s “Type-C Power Port.”
For a 1080P monitor, a DC 5V 3A / 9V 2A or PD 5-20V power adapter is recommended.
How do I navigate the On-Screen Display (OSD) menu on my VILVA V156F1 monitor?
1. Adjust brightness by pulling the multi-function key up.
2. Adjust volume by pulling the multi-function key down.
3. Enter the menu and go to a submenu by pressing the multi-function key.
4. Exit the menu or return to the previous menu by pressing the power button.
How do I use the smart case as a stand for my VILVA V156F1 portable monitor?
The case can protect the display from dust and scratches. To use it as a stand:
1. Part A of the case is magnetic, as is the backside of the monitor.
2. Attach Part A of the case to the backside of the monitor magnetically.
3. Flip the cover and attach Part B to the backside of Part A magnetically. Part C will then form the base to stand the monitor stably.
CLICK HERE TO DOWNLOAD VILVA V156F1 (02) PDF DOCUMENT