VERIZON JETPACK MIFI 4510L (01) PDF MANUAL


Post questions, comments, reviews or errors in the comment box below.

Your File is Ready … Download PDF

CLICK HERE TO DOWNLOAD VERIZON JETPACK MIFI 4510L (01) PDF MANUAL


PDF Content Summary: USER GUIDE VERIZON JETPACKTM MOBILE HOTSPOT MiFi®4510L 90026384 R3 ©2012 Novatel Wireless, Inc. All rights reserved. The information contained in this document is subject to change without notice and should not be construed as a commitment by Novatel Wireless, Inc. Patents and Licenses Visit novatelwireless.com/patents for a complete list of all Novatel Wireless patents. Software License Proprietary Rights Provisions: The software drivers provided with this product are copyrighted by Novatel Wireless and/or Novatel Wireless’ suppliers. Although copyrighted, the software drivers are unpublished and embody valuable trade secrets proprietary to Novatel Wireless and/or Novatel Wireless’ suppliers. The disassembly, decompilation, and/or Reverse Engineering of the software drivers for any purpose is strictly prohibited by international law. The copying of the software drivers, except for a reasonable number of back-up copies is strictly prohibited by international law. It is forbidden by international law to provide access to the software drivers to any person for any purpose other than processing the internal data for the intended use of the software drivers. U.S. Government Restricted Rights Clause: The software drivers are classified as “Commercial Computing device Software” and the U.S. Government is acquiring only “Restricted Rights” in the software drivers and their Documentation. U.S. Government Export Administration Act Compliance Clause: It is forbidden by US law to export, license or otherwise transfer the software drivers or Derivative Works to any country where such transfer is prohibited by the United States Export Administration Act, or any successor legislation, or in violation of the laws of any other country. Trademarks and Service Marks Novatel Wireless is a trademark of Novatel Wireless, Inc., and the other trademarks, logos, and service marks (collectively the “Trademarks”) used in this user manual are the property of Novatel Wireless or their respective owners. Nothing contained in this user manual should be construed as granting by implication, estoppel, or otherwise, a license or right of use of Novatel Wireless or any other Trademark displayed in this user manual without the written permission of Novatel Wireless or its respective owners. • Novatel Wireless, and the Novatel Wireless logo are trademarks of Novatel Wireless, Inc. • MiFi® and the MiFi logo are registered trademarks of Novatel Wireless, Inc. • Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. • Apple®, Mac®, and Mac OS® are trademarks of Apple, Inc., registered in the U.S. and other countries. • Linux® is the registered trademark of Linus Torvalds in the U.S. and other countries. • microSDTM and microSDHCTM are trademarks of SanDisk. The names of actual companies and products mentioned in this user manual may be the trademarks of their respective owners. FCC ID: PKRNVWMIFI4510 IC ID: 3229B-MIFI4510 PN: 90026384_R3_UG MiFi4510L_VZW_05Apr2012 Please visit verizonwireless.com for the latest information about your device. Contents Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 System Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Service Status Indicator (LED) States. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Service Display States. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Power Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Caring for Your Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Using the MiFi 4510L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Accessing the Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Using the Device for the First Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Assemble the Wall Charger. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Install the 4G LTE SIM Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Remove the 4G LTE SIM Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Insert and Charge the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Remove the Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Battery Tips. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Power the MiFi 4510L On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Power On. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Power Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Connecting to the MiFi Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 Using the Device After Setup is Complete . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Normal Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Setting up a Temporary Hotspot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Security for the MiFi 4510L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 MiFi Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Configuring MiFi Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Login. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Login. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Menu Bar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Home . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Setup Wizard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Wi-Fi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Wi-Fi Profiles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Choosing a Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Setting Up a Temporary Hotspot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Changing to a Different Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Updating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Updating a Profile Not Currently in Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 TCP/IP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Connected Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 WWAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Internet Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 WWAN Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Admin Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Set Administration Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 MAC Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Enable MAC Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Trusted Client List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Add Trusted Client MAC Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Port Filtering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Enable Port Filtering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Allowed Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Custom Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 Advanced . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Wi-Fi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Router. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Config File. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Config File Download . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Config File Upload . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Diagnostics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 System Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 System Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Port Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 Port Forwarding Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Automatic Shutdown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Software Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Update Status . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 iii Last Update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 Common Problems and Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 Customer Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Data Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Product Specifications and Regulatory Information . . . . . . . . . . . . . . . . . . . . . . 73 Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Technology/Bands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Environmental. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Regulatory Statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Wireless Communications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 Limited Warranty and Liability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 Safety Hazards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 Proper Battery Use and Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 Glossary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 iv Getting Started1 Overview Components Power Management Caring for Your Device Overview Congratulations on your purchase of the Verizon JetpackTM Mobile Hotspot - MiFi® 4510L for 4G LTETM and Wi-Fi! With the MiFi 4510L you can access 4G LTE networks for faster apps, uploads and downloads. Connect up to five Wi-Fi enabled devices to the Internet at once - laptops, tablets, e-readers, gaming consoles and more* - and experience download speeds of up to 100 Mbps**. The MiFi 4510L is also compatible with 3G networks, ensuring reliable connectivity when and where you need it. Features • Connect to 4G LTE High-Speed Wireless Data • Wi-Fi Connectivity • Manage Wireless Network Activity • MiFi Settings is an easy-to-use web-based interface that allows you to manage, monitor, and customize your Wi-Fi and 4G LTE connection. • Advanced embedded antenna design • VPN capability • Auto connectivity options Package Contents The Verizon Wireless MiFi 4510L package includes: • MiFi 4510L • 1500mAh Standard Lithium Ion Battery • Wall Charger • USB Cable • Protective Pouch • Verizon Wireless Brochures * When multiple users are connected to the MiFi 4510L, all of their data usage will be aggregated and applied to the mobile broadband customer. ** Manufacturer’s rated peak theoretical speed. Actual speeds may vary. 2 System Requirements • Compatible with all major operating systems • Works with the latest versions of browsers, including AndroidTM, ChromeTM, Firefox®, Internet Explorer®, SafariTM and Mobile SafariTM To use Wi-Fi mode, your computer needs Wi-Fi capability and Internet browser software. Your device must have proper data service to function properly. (See Using the Device for the First Time on page 11.) 3

Components ➎ ➋ ➍ ➌

➊ Micro USB Connector — Connects to the A/C and car chargers. ➋ Master Reset Button — Insert a paperclip in the small hole to reset the device to factory settings. (See How do I reset the MiFi 4510L device back to factory settings? on page 61.) ➌ Service Status Indicator (LED) — Indicates whether the device has service or not. (See Service Status Indicator (LED) States on page 5.) ➍ Power Button — Powers the device on and off. ➎ Status Display — Provides connection and battery status, network signal strength, roaming status, and the number of users connected with Wi-Fi. (See Service Display States on page 6.) ➏ Network Name and Password Label (not shown) — Shows pre-configured network name (SSID) and Wi-Fi/Admin password (on device back cover as well as on the front of the Connect Card). ➊ 4 Service Status Indicator (LED) States LED Color Status Description No Light Off The device is powered off or otherwise is not receiving power.

Yellow Solid Blinking The device is in power down mode. The device is powered off and also charging the battery. Green Solid Blinking The device is powered on; 4G LTE service is available but not connected or connected while dormant. The device is powered on and connected to the 4G LTE network and transmitting data. Violet Solid Blinking The device is powered on; 3G 1X or EV-DO service is available but not connected or connected while dormant. The device is powered on and connected to a 3G 1X or EV-DO network and transmitting data.

Red Blinking If this occurs during power up, no SIM Card is inserted. All other times, this indicates an error or a SIM Card failure. White Blinking The device is powered on and the firmware is being upgraded. This LED only applies to over-the-air firmware updates. 5 Service Display States Display Icon Status Description

No icons The display is off, and the LED is also off. The device is powered off or otherwise is not receiving power. Network signal strength An antenna with 0-4 bars. More bars indicate stronger signal. Roaming indicator Present or not present. If the icon is present, the device is roaming on another carrier’s network. Battery status More bars indicate more battery life. Charge immediately. A battery outline filled with bars; while charging, the bars cycle from 0-4 bars. When fully charged, the bars don’t move. When the battery is very low, the battery outline blinks on and off every two seconds. Charge the battery immediately. A battery outline filled with bars; while charging, the bars cycle from 0-4 bars. When fully charged, the bars don’t move. When the battery is very low, the battery outline blinks on and off every two seconds. Charge the battery immediately. Number of Wi-Fi users connected Number of dots shown. The number of dots indicates the number of Wi-Fi users connected to the device. 6

Power Management Your device will work from its battery or when plugged into a power source. • Battery — Charge the battery by plugging in the wall charger. While the battery is charging the battery icon on the Status Display cycles from one to four bars. When the battery is fully charged, the battery icon is solid. • Wall charger — You can use the device when the charger is plugged into a wall socket. The MiFi battery charges while it is plugged in. Before using the MiFi 4510L, read the battery safety information in the "Safety Hazards" section of this guide. (See Proper Battery Use and Disposal on page 79.) 7 Caring for Your Device Like any electronic device, the MiFi 4510L must be handled with care to ensure reliable operation. Verizon Wireless recommends the following guidelines: • Protect the device from liquids, dust, and excessive temperatures. • Do not apply adhesive labels to the device; they might cause the device to potentially overheat or alter the performance of the antenna. • Use only batteries, chargers and accessories with your device that have been approved by Verizon Wireless. The failure to use approved batteries, chargers and accessories may increase the risk that your device will overheat, catch fire, or explode, resulting in serious bodily injury, death, or property damage, and may void the product warranty. • Store the device in a safe place when not in use. 8 Using the MiFi 4510L2 Accessing the Network Using the Device for the First Time Connecting to the MiFi Device Using the Device After Setup is Complete Accessing the User Guide Accessing the Network 4G LTE With LTE bandwidth (700 MHz) you can get the broadband-like speed you require to work efficiently outside the home or office. You can connect to the Internet, access your corporate intranet, check your email and download attachments at speeds that are up to 10 times faster than 3G. 4G Mobile Broadband with LTE* • Download: typical download speeds of 100 DL/50 UL. • Upload: typical upload speeds of 100 DL/50 UL. 3G Mobile Broadband with EVDO Rev. A** • Download: typical download speeds of 600 kbps–1.4 Mbps with bursts up to 3.1 Mbps. • Upload: typical upload speeds of 500-800 kbps with bursts up to 1.8 Mbps. GSM Mobile Broadband with HSPA+, WCDMA, EDGE and GPRS*** • Download and upload speeds depend on the roaming network. Wi-Fi 802.11b/g/n • 802.11b uses the 2.4 GHz frequency with a bandwidth of 11 Mbps. • 802.11g uses the 2.4 GHz frequency with a bandwidth of 54 Mbps. • 802.11n uses the 2.4 GHz frequency with a bandwidth of 150 Mbps. * Speeds shown are those published by Verizon Wireless, Inc. and are theoretical in nature. Actual throughput speed and coverage may vary by network operator. Speed claims not applicable when roaming. ** Mobile Broadband Rev.A speed claim based on Verizon Wireless network tests with 5 MB FTP data files without compression. Your Mobile Broadband Rev. A-enabled device will indicate coverage when you are in a Mobile Broadband Rev. A service area. When outside the Rev. A service area, your wireless device will revert to Mobile Broadband Rev. 0 (typical download speeds will be 400–700 Kbps and upload speeds will be 60–80 Kbps). *** Subject to Customer Agreement, Calling Plan, credit approval, and other service terms. 10 Using the Device for the First Time To get started, follow these steps: ➊ Confirm your computer meets the minimum system requirements. (See System Requirements on page 3.) ➋ Assemble the wall charger. (See Assemble the Wall Charger on page 12.) ➌ Install the 4G LTE SIM Card. (See Install the 4G LTE SIM Card on page 12.) ➍ Insert and charge the battery. (See Insert and Charge the Battery on page 14.) ➎ Turn on the device. (See Power the MiFi 4510L On and Off on page 18.) ➏ Connect the device to your computer using Wi-Fi. (See Connecting to the MiFi Device on page 19.) ➐ Connect to MiFi Settings. (See Connect to MiFi Settings on page 19.) IMPORTANT The MiFi 4510L requires an activated account with a network operator to function. 11 Assemble the Wall Charger The wall charger comes with a removable plug. You need to connect it before using the MiFi device for the first time. To assemble the wall charger, follow these steps: ➊ Remove the plug and the wall charger from the package. ➋ Slide the plug into the wall charger. Install the 4G LTE SIM Card To install your new 4G SIM Card, follow these steps: ➊ Open the cover located on the underside of the MiFi 4510L. ➋ Remove SIM Card from the outer card, being careful not to touch the gold-colored contacts. ➌ Hold the card as shown, with the gold-colored contact points facing down. ➍ Insert the SIM Card into the slot. The 4G LTE SIM Card MUST remain in the SIM Card slot when in use. Your SIM (Subscriber Identity Module) card is a small rectangular plastic card that stores your phone number and important information about your wireless service. CAUTION! Do not bend or scratch your SIM Card. Avoid exposing your SIM Card to static electricity, water, or dirt. 12 Remove the 4G LTE SIM Card To remove the 4G LTE SIM Card, follow these steps: ➊ Open the SIM Card cover located on the underside of the MiFi 4510L. Press down on the small black tab to the left side of the SIM Card slot. ➋ Gently remove the SIM Card from the SIM Card slot. NOTE Should your 4G LTE SIM Card be lost or damaged, contact your network operator. 13 Insert and Charge the Battery IMPORTANT Before you use your device, be sure to charge the battery for at least three hours to ensure a full initial charge. To insert and charge the battery, follow these steps: ➊ Press the button and then slide the cover to open the battery compartment, located on the bottom of the device. Set the cover aside. ➋ Align the gold-colored contacts on the battery with the gold-colored contacts on the device and gently slide the battery into place. 14 IMPORTANT When connecting the MiFi 4510L to your computer, it is recommended that a good quality shielded USB cable that is equal to or less than 1 m (~3'3") in length be used. ➎ Plug the other end of the wall charger into the appropriate electrical outlet. Charge for at least three hours. WARNING ! Use only batteries and chargers with your device that have been approved by Verizon Wireless. The failure to use approved batteries and chargers may increase the risk that your device will overheat, catch fire, or explode, resulting in serious bodily injury, death, or property damage. You are now ready to connect your computer or other Wi-Fi enabled device to the MiFi 4510L. ➌ Replace the cover by setting it on the device where the notches align, and then gently slide the cover back toward the release button until it clicks into place. ➍ Connect the micro USB end of the wall charger to the micro USB port on the device. 15 Remove the Battery To remove or replace the battery, follow these steps: ➊ Press the button and then slide the cover to open the battery compartment, located on the bottom of the device. Set the cover aside. ➋ Insert your fingernail into the battery removal divot and lift the battery out of the battery compartment. 16 Battery Tips WARNING ! Use only batteries and chargers with your device that have been approved by Verizon Wireless. Always use Verizon Wireless original batteries and chargers. The warranty does not cover damage caused by non-Verizon Wireless batteries and/or chargers. • It normally takes at least three hours to fully charge the battery with the wall charger. • Do not use sharp objects to access the battery well. Doing so may damage the device and the battery. • Do not use excessive force to remove the battery or to access the battery well. • The battery discharges more rapidly as additional devices access your MiFi device. • Battery life depends on the network, signal strength, temperature, features, and accessories you use. • Your device also works with an approved car charger. • New batteries or batteries stored for a long time may take more time to charge. • When charging your battery, keep it near room temperature. • When storing your battery, keep it uncharged in a cool, dark, dry place. • Never expose batteries to temperatures below -20°C (40°F) or above 60°C (140°F). • Never leave the device in an unattended vehicle due to uncontrollable temperatures that may be outside the desired temperature for this device. • Some batteries perform best after several full charge/discharge cycles. • It is normal for batteries to gradually wear down and require longer charging times. If you notice a change in your battery life, it is probably time to purchase a new battery. IMPORTANT Whenever you remove or insert either the battery or the SIM Card, ensure your MiFi device is not connected to any device or power source. Never use tools, knives, keys, pens or any type of object to force the door open or to remove the battery. Using any of these types of objects could result in puncturing the MiFi battery. WARNING ! The failure to use approved batteries and chargers may increase the risk that your device will overheat, catch fire, or explode, resulting in serious bodily injury, death, or property damage. To avoid risk of explosion, never dispose of batteries in a fire. 17 Power the MiFi 4510L On and Off Power On • Press the Power Button until the LED turns green or violet. Power Off • Press and hold the Power Button until the display turns white and the LED turns amber. 18 Connecting to the MiFi Device Now you can connect your computer to your MiFi device using Wi-Fi. Connect to MiFi Settings To connect to the MiFi device, follow these steps: ➊ Turn on your computer and turn on the MiFi 4510L. The MiFi 4510L's LED should be solid green or violet, indicating the device is in service and ready to connect. The MiFi 4510L broadcasts its own wireless network. ➋ On your computer, use the Wi-Fi manager (Windows) or the AirPort menu bar icon (Mac OS X) to connect wirelessly to the MiFi 4510L wireless network. Tip! The steps to connect to a Wi-Fi network vary depending on your operating system and whether you use the native application or third-party software. Generally, you click an icon in the Windows notification area where you can select View Available Wireless Networks, or click the Airport icon in the menu bar on a Mac. If you are unfamiliar with wireless networking on your computer, consult the computer’s help system. ➌ Connect to the network name found on the sticker that appears on the back of the MiFi device as well as on the front of the Connect Card. The network name or SSID is in the format Verizon MIFI4510L XXXX Secure, where XXXX are four digits unique to your device. ➍ Enter the Wi-Fi/Admin password. The password appears on the back of the MiFi device as well as on the front of the Connect Card. NOTE If you are entering the SSID manually, please add the word “Secure” after the SSID. For example, “Verizon MIFI4510L 1A3B Secure”. ➎ To change device settings, connect to the MiFi Settings on-device web page. (See Configuring MiFi Settings on page 22.) IMPORTANT Charge the battery completely before you connect your computer to your MiFi device. (See Insert and Charge the Battery on page 14.) 19 Using the Device After Setup is Complete You can use the MiFi 4510L as a wireless mobile hotspot to connect your computer and/or (up to a total of five) other Wi-Fi enabled devices to the mobile broadband network. You can customize the MiFi 4510L's settings using MiFi Settings. (See Configuring MiFi Settings on page 22.) Normal Use • The MiFi 4510L is powered on as soon as you press the power button and the display turns on. • The LED on the device becomes green for 4G or violet for 3G and blinks according to the connection speed. Setting up a Temporary Hotspot (See Setting Up a Temporary Hotspot on page 32.) for more information about setting up a temporary hotspot. Security for the MiFi 4510L The MiFi 4510L comes from the factory with security enabled. A sticker on the back of the device as well as the front of the Connect Card includes the name of the wireless network (SSID) and the network password. You can change the security settings in the MiFi Settings Wi-Fi screen. (See Wi-Fi on page 30.) 20 MiFi Settings3 Configuring MiFi Settings Login Home Wi-Fi LAN WWAN Security Advanced Configuring MiFi Settings You can configure the Wi-Fi settings on your device using the easy-to-use MiFi Settings Web-based User Interface (MiFi Settings). It allows you to manage, monitor, and customize your Wi-Fi and 4G LTE Mobile Broadband connection. The following sections describe how to connect to MiFi Settings, as well as each screen and the corresponding functionality. Connect to MiFi Settings To connect to MiFi settings, follow these steps: ➊ Turn on your computer and turn on the MiFi 4510L device. MiFi 4510L's LED should be solid green (4G) or violet (3G), indicating the device is in service and ready to connect. MiFi 4510L broadcasts its own wireless network. ➋ On your computer, use the Wi-Fi manager (Windows) or the AirPort menu bar icon (Mac OS X) to connect wirelessly to the MiFi 4510L wireless network. Tip! The steps to connect to a Wi-Fi network vary depending on your operating system and whether you use the native application or third-party software. Generally, you click an icon in the Windows notification area where you can select View Available Wireless Networks, or click the Airport icon in the menu bar on a Mac. If you are unfamiliar with wireless networking on your computer, consult the computer’s help system. ➌ Connect to the SSID or network name that appears on the back of the MiFi device as well as on the front of the Connect Card. The network name or SSID is in the format Verizon MIFI4510L XXXX Secure, where XXXX are four digits unique to your device. ➍ Click Connect and enter the Wi-Fi/Admin password. The password appears on the back of the MiFi device as well as on the front of the Connect Card. ➎ Open your browser and type admin.mifi or 192.168.1.1 into the address bar. Then press the Enter or Return key. The Welcome Page opens. (See Login on page 23.) ➏ Type your Wi-Fi/Admin password in the Login field in the upper right corner of the window and click Login. The Welcome Page changes to the Home Page. (See Home on page 25.) 22 Login The Login page is the first page you see after connecting and prior to logging in. It contains the status bar, the Connect/Disconnect button, and the Setup Wizard. You can access more information after you log in. Login Type the password (the default password is found on the sticker on the back of the MiFi device, or on the front of the Connect Card) in the Login field at the top right corner of the window. 23 Menu Bar The Menu Bar is the primary navigation for MiFi Settings. You can access each feature under the appropriate menu. 24 Home The Home page is the first screen you see after logging in to MiFi Settings. It is similar to the Login page, but adds more options in the status bar. It is the main point of entry for everything you do in the browser interface. You can also launch the Setup Wizard from this screen to change your login and Wi-Fi settings. 25 Setup Wizard The MiFi 4510L Setup Wizard is a quick and convenient way to change your login and Wi-Fi settings. right after you login on the Login page. To launch the Setup Wizard, click the Setup Wizard button on the Home page. 26 The first screen of the Setup Wizard is the MIFI device Password screen. To change your existing MiFi password: ➊ Type your new password in the New Password field. ➋ Type your new password a second time in the Verify New Password field. ➌ Click Next to accept the new password and display the Wi-Fi Settings screen. 27 The Wi-Fi Settings screen allows you to change your Wi-Fi profile settings and customize your security options. To change your Wi-Fi Settings: ➊ Check the Change Wi-Fi Settings check box. ➋ Select your preferred security option from the Security drop down menu. ➌ Click Next to accept the new security settings and display the final Setup Wizard screen where you can finalize all the changes you have made. 28 The Finish screen is where you will confirm and apply the changes you have made using the Setup Wizard. To confirm and apply your changes click Finish. 29 Wi-Fi The Wi-Fi menu takes you to the Wi-Fi screen. The Wi-Fi screen is the screen you use to customize the Wi-Fi profiles. The Wi-Fi screen has the following section: • Wi-Fi Profiles (See Wi-Fi Profiles on page 31.) 30 Wi-Fi Profiles The Wi-Fi Profiles section has the following options: • Current Profile — The wireless (802.11) profile currently in use. • Selected Profile — The profile settings shown on the page. (See Changing to a Different Profile on page 34.) • Network Name (SSID) — The name of the MiFi 4510L device's wireless network. • 802.11 Mode — The wireless network technology used. 802.11g + 802.11b + 802.11n is most compatible, allowing both 802.11b, 802.11g, and 802.11n devices to connect to the wireless network. • WMM — Wi-Fi Multimedia. Enables your device to stream multimedia files. • Channel — If available, select Auto. With this setting, MiFi 4510L selects the best available channel. If the Auto setting is not available, you can experiment to see which channel provides the best results, or use the default setting. • Security — The security type used to encrypt the wireless network. • WEP 64-bit (least secure, more compatible with older devices) • WEP 128-bit • WPA Personal/PSK (TKIP) • WPA2 Personal/PSK (AES) • WPA/WPA2 Personal Mixed Mode (most secure, less compatible with older devices) IMPORTANT You should use the Secure profile with the WPA/WPA2 Personal Mixed Mode security setting whenever possible. • Authentication — This is locked to Open Access for all profiles. • Network Key — The passkey for the wireless network. The default passkey is printed on a sticker on the device. The following security types support the corresponding passkey lengths. • WEP 64-bit – 5 ASCII characters or 10 HEX characters. • WEP 128-bit – 13 ASCII characters or 26 HEX characters. • WPA Personal/PSK (TKIP) – ASCII string, 8 to 63 characters in length. • WPA2 Personal/PSK (AES) – ASCII string, 8 to 63 characters in length. 31 Choosing a Profile Your device comes with the Secure profile already set. The following profiles come with your device: • Secure — This is the profile you should use most of the time. You can set up this profile with the security measures you need to use your device safely. • Temporary Hotspot — This profile allows you set up a temporary hotspot to allow others nearby (maximum of five) to go online at the same time. • Open — This profile is not secure and should be avoided. Setting Up a Temporary Hotspot You can use the device to set up a temporary hotspot to allow a maximum of five (5) connections to your MiFi 4510L at one time. The Temporary Hotspot profile is pre-set on your device. It generates a temporary network name (SSID) and network key so you can allow others to connect to your device without having to change your secure profile's security settings. 32 ] Set up a Temporary Hotspot To set up a Temporary Hotspot, follow these steps: ➊ Connect to MiFi Settings and log in. (See Configuring MiFi Settings on page 22.) ➋ Go to the Wi-Fi screen. (See Wi-Fi on page 30.) ➌ On the Wi-Fi screen, select Temporary Hotspot from the Selected Profile drop-down menu. A message from the webpage appears stating that the Network Name (SSID) and security settings are auto-generated for the selected Profile. ➍ Click OK. ➎ Click Generate to create a new network name and network key. You should write down the new network name and network key. ➏ Click Apply. Others can now use the temporary network name (SSID) and network key to connect to your device. See Wi-Fi on page 30 for more information about changing profiles. ➐ Click Revert to cancel any changes and return settings to current values. 33 Changing to a Different Profile To use a different profile, follow these steps: ➊ Select the desired profile from the Selected Profile drop-down menu. ➋ Wait a moment for the web page to update with the Wi-Fi settings for the selected profile. ➌ Click Apply to change to the new profile settings. IMPORTANT Changing the profile ends all Wi-Fi connections to MiFi 4510L, including the current connection to MiFi Settings. You must re-connect your computer to MiFi 4510L using the new profile's Wi-Fi settings. Be sure to write down the new network key (Wi-Fi passkey) before you finish changing the profile. 34 Updating To update the current profile, follow these steps: ➊ Keep the same profile in the Selected Profile drop-down menu. ➋ Make changes to the profile settings. ➌ Click Apply. • If you change the Network Name (SSID), security method, or network key you will need to re-connect with the Wi-Fi manager on your computer. • If you change other settings, your computer will re-connect automatically after MiFi 4510L restarts. Tip! Some Wi-Fi clients become confused if the security is changed and the network name is not. If you change security settings and do not get asked for the new network key when you try to reconnect, delete the existing old network name from your Preferred Networks list on your wireless device. Then you can reconnect. IMPORTANT Changing the Network Name (SSID), security method, or network key (Wi-Fi passkey) ends all Wi-Fi connections to MiFi 4510L, including the current connection to MiFi Settings. You must re-connect your computer to MiFi 4510L using the new profile's Wi-Fi settings. Be sure to write down the new network key (Wi-Fi passkey) before you finish changing the profile. 35 Updating a Profile Not Currently in Use To update a profile not currently in use, follow these steps: ➊ Change the Selected Profile drop-down menu to a different profile. ➋ Wait a moment for the web page to update with the Wi-Fi settings for the selected profile. ➌ Change the settings. NOTE The Temporary Hotspot profile cannot be changed directly. You must click Generate to generate a new network name (SSID) and network key. ➍ Click Update Profile to save the changes. ORClick Apply to update the profile and also make it the current profile. OR ➎ Click Revert to cancel the changes and return to the previous settings. 36 Buttons • Update Profile — Click this button to add changes to a profile not currently in use. This does not affect the existing Wi-Fi connection between your computer and the device. • Apply — Click this button to apply changes to the current profile. • Revert — Click this button to return changed profile settings to the previous settings. • Generate — Click this button (available for the Temporary Hotspot profile only) to generate a network name (SSID) and network key for the Temporary Hotspot profile. The remaining Temporary Hotspot settings are copied from the Secure profile. 37 LAN The LAN menu takes you to the LAN screen. The LAN screen gives you settings and information about MiFi 4510L's network. The LAN screen is divided into the following sections: • TCP/IP (See TCP/IP on page 39.) • Connected Devices (See Connected Devices on page 39.) 38 TCP/IP • IP Address — The IP address for MiFi 4510L. • Subnet Mask — The subnet mask network setting for MiFi 4510L. The default value 255.255.255.0 is standard for small (class "C") networks. If you change the LAN IP Address, ensure you use the correct Subnet Mask for the IP address range containing the LAN IP address. • MAC Address — The Media Access Controller (MAC) or physical address for MiFi 4510L. • DHCP Address Range — The range of IP addresses reserved for use by MiFi 4510L's DHCP server table. If a device with a static IP address wants to connect to MiFi 4510L's network, the static IP should be outside of the DHCP address range. Most devices do not have a static IP. Connected Devices • IP Address — The IP address for the connected device. • IP Type — This can be DHCP if the IP address came from MiFi 4510L, or ARP if the ARP protocol was used. • Hostname — The network name for the connected device (if available). • MAC Address — The MAC address for the connected device. NOTE The MAC address on the Windows operating system is called the Physical Address. • Date/Time — The date/time the device was detected by the network. Buttons • Refresh — Click this button to re-load the LAN screen to show changes to the list of connected devices, such as a device that recently joined or left the network. • Apply — Click this button to apply any changes you made to MiFi 4510L's IP address or subnet mask. • Revert — Click this button to discard any unsaved changes and keep the most recent IP address and subnet mask. IMPORTANT Changing MiFi 4510L's IP address causes the device to re-start. This stops all Wi-Fi and Internet connections. You must re-connect your computer to MiFi 4510L using the new IP address. Be sure to write down the new IP address before you finish changing the profile. 39 WWAN The WWAN menu takes you to the WWAN screen. The WWAN screen gives you information about the MiFi 4510L device's Internet connection. The WWAN screen is divided into the following sections: • Internet Connection (See Internet Connection on page 41.) • WWAN Settings (See WWAN Settings on page 42.) 40 Internet Connection The Internet Connection section shows device settings and status. • Status — The status of the Internet connection, usually Connected, Disconnected or Dormant. • Technology — The type of technology used to connect to the Internet. • Received — The amount of data received from the network. • Transmitted — The amount of data sent to the network. • Connected Time — How long the device has been connected to the network. • IP Address — The Internet Protocol (IP) address that identifies this device on the network. • Mask — The mask is a standard address that covers the MiFi device's network behind the larger Internet. • Gateway — The address of the server used to access the Internet. • DNS — The address of the Domain Name Server (DNS). Buttons • Connect — Click this button to connect to the Internet. • Disconnect — Click this button to disconnect from the Internet. • Connection Log — Click this button to view the Internet connection log. 41 WWAN Settings To configure the settings, follow these steps: ➊ Select Auto-connect from the Connection Preferred Mode drop-down menu to automatically connect to the Internet when the device is turned on. Buttons • Apply — Click this button to save and apply your changes. • Revert — Click this button to delete any unsaved changes. NOTE The APN is the Access Point Name the device uses to connect to the Internet. This is automatically provided by your wireless carrier. ➋ Click More to set the WWAN Preferred Mode to the type of technology you want to use to connect to the Internet. 42 Security The Security Menu takes you to the following screens: • Admin Password (See Admin Password on page 43.) • MAC Filter (See MAC Filter on page 45.) • Port Filtering (See on page 48.) Admin Password The Admin Password screen enables you to set the administration password. This is the password you use to log in to MiFi Settings. The default password appears on the back of the MiFi device as well as on the front of the Connect Card. The Admin Pass word screen contains the following section: • Set Administration Password (See Set Administration Password on page 44.) 43 Set Administration Password The default password is admin. To set or change the administration password, follow these steps: ➊ Type your current password in the Current Password box. ➋ Type the new password (it must have between 4 and 64 characters) in the New Password box. ➌ Type it again in the Verify New Password box. ➍ Click Apply. Next time you log in to MiFi Settings, you need to use the new password. Buttons • Apply — Click this button to apply any changes made to the password settings. • Revert — Click this button to return password settings to the previous settings. IMPORTANT Record your administration password. If you forget it, you have to reset the device before you can use MiFi Settings. (See How do I reset the MiFi 4510L device back to factory settings? on page 61.) 44 MAC Filter The MAC Filter screen enables you to allow specific devices to connect to MiFi 4510L's wireless network. For example, if you put the MAC address for your Wi-Fi-enabled mobile phone and the MAC addess for your computer in the MAC Filter Trusted Client List, then only those devices can connect to MiFi 4510L. The MAC Filter screen is divided into the following sections: • Enable MAC Filter (See Enable MAC Filter on page 46.) • Trusted Client List (See Trusted Client List on page 46.) • Add Trusted Client MAC Address (See Add Trusted Client MAC Address on page 47.) Trusted devices still need the correct network name (SSID) and network key (Wi-Fi passkey). NOTE The MAC address on the Windows operating system is called the Physical Address. IMPORTANT Do not enable MAC filtering unless you have added your own computer's MAC address to the trusted client list. Otherwise you will be unable to access the device. 45 Enable MAC Filter The Enable MAC Filter checkbox enables or disables the MAC Filter feature. • When the feature is enabled (checked), you must add the MAC address for the device to the Trusted Client List. If a device not in the list tries to connect to the MiFi 4510L wireless network, the connection is blocked even if the device has the correct network name (SSID) and network key (Wi-Fi passkey). • When the feature is disabled (un-checked), any device with the correct network name (SSID) and network key (Wi-Fi passkey) can connect to the MiFi 4510L wireless network. Find the MAC Address on a Computer The Media Access Controller (MAC) Address is also known as a hardware or physical address for a device (usually a network adapter). It consists of six pairs of numbers and letters (for example, 00-21-9B-1C-64-34). You can view the MAC address for any device connected to the MiFi wireless network from the LAN screen. (See LAN on page 38.) Tip! You can cut and paste your computer's MAC address from the Wi-Fi Clients section of the Wi-Fi screen. If the computer is not connected to the MiFi wireless network, you can find the MAC address directly. To find the MAC address, follow one of these steps: • On a Windows PC, the MAC address is the Physical Address. You can find the Physical Address by running ipconfig/all from the cmd window. » To run ipconfig/all, select Start > All Programs (or Programs) > Accessories > Command Prompt to open the Command Prompt window. Then type ipconfig/all and press the Return or Enter key. • On a Mac, the MAC address is the AirPort ID. » To find the AirPort ID, open the Apple Menu > System Preferences > Network. In the list, click AirPort. Click Advanced. A sheet opens. Click the AirPort tab. The AirPort ID is at the bottom of the sheet. IMPORTANT Windows only: Make sure you get the MAC address for the wireless network adapter and not the Ethernet controller (NIC), if the computer has both. Trusted Client List The Trusted Client List section displays the MAC address(es) of trusted devices. Only devices in the Trusted Client List are able to connect to the MiFi 4510L wireless network. 46 Add Trusted Client MAC Address To add a device to the Trusted Client List, follow these steps: ➊ Type the Wi-Fi-enabled device's MAC address in the Add Trusted Client MAC Address field. You can use either ":" or "-" as the separator (for example, 00:21:9B:1C:64:34 or 00-21-9B-1C-64-34). ➋ Click Add Client. ➌ Repeat steps 1 and 2 as needed. ➍ When the list is complete, click Apply. 47 Remove a Device from the Trusted Client List To remove a device from the Trusted Client List, follow these steps: ➊ Click on the device in the Trusted Client List to select it. ➋ Click Delete Client. Buttons • Delete Client — Click this button to remove a device from the Trusted Client List. • Add Client — Click this button to add the MAC address typed in the Add Trusted Client MAC Address field to the Trusted Client List. • Apply — Click this button to save changes made to the list. • Revert — Click this button to discard changes made to the list. 48 Port Filtering The Port Filtering screen allows you to block outgoing Internet connections. You can set a list of Allowed Applications to only allow certain programs to connect to the Internet. The Port Filtering screen is divided into the following sections: • Enable Port Filtering (See Enable Port Filtering on page 50.) • Allowed Applications (See Allowed Applications on page 51.) • Custom Applications (See Custom Applications on page 52.) 49 Enable Port Filtering The Enable Port Filtering checkbox enables or disables the Port Filtering feature. • When the feature is enabled (checked), you must select a port filtering application in the Allowed Applications list to allow that application to connect to the Internet. For example, if you select VPN in the Allowed Applications list but do not select HTTP, you can connect to a VPN server but you cannot connect to a web page using your Internet browser. • When the feature is disabled (un-checked), any application can connect to the Internet. 50 Allowed Applications Enable each port filtering application that needs to be able to access the Internet. When port filtering is enabled, all other applications are blocked. 51 Custom Applications This page has no effect unless the Port Filtering feature is enabled. Click Custom Applications to open the Custom Applications screen. The Custom Applications screen uses check boxes to enable port filtering. You must enable custom applications so they can connect to the Internet, and you need to know details of the traffic used and generated by the applications you wish to define. The Custom Applications screen has the following options: • Application Name — Type a name for the application. • Ports — Click the Ports link to show the Port Definition Panel. Click Hide when you finish defining the current application. Click Apply when you finish defining all applications. • Port Definition Panel — This allows you to define the ports used by this application. The background shading and dialog title indicates the current application. 52 Port Ranges You can define up to five port ranges for each application. Each port range has the following options: • Start Port — Type the beginning of the range of port numbers used by outgoing traffic for this application. Use as many rows as necessary to define the required number of port ranges. Unused rows can be left blank. • End Port — Type the end of the range of port numbers. If the port is a single port instead of a range, type the same value for both the Start Port and the End Port. • Protocol — For each port range (each row), select the protocol (TCP, UDP, or both) used by that port range. You can define all of your applications before you click Apply to save your changes. Use the Ports and Hide links as necessary to open and close the Port Definition Panel so you can define the ports for each application as needed. Buttons • Apply — Click this button to save changes made to the applications and/or port ranges. • Revert — Click this button to discard changes made to the applications and/or port ranges. 53 Advanced The Advanced Menu takes you to the following screens: • Settings (See Settings on page 55.) • Config File (See Config File on page 58.) • Diagnostics (See Diagnostics on page 61.) • Port Forwarding (See Port Forwarding on page 64.) • Power (See Power on page 66.) • Software Update (See Software Update on page 67.) 54 Settings The Advanced Settings screen is divided into the following sections: • Wi-Fi (See Wi-Fi on page 30.) • Router (See Router on page 56.) • System (See System on page 57.) 55 Wi-Fi The Network Name (SSID) broadcast enable check box enables or disables the SSID broadcast feature. • If this is enabled (checked), MiFi 4510L's wireless network appears in the Available Wireless Networks list on your computer or portable device. • If this is disabled (un-checked), the MiFi 4510L is not listed and its network name (SSID) must be typed manually to connect a device. Router The DHCP Server enable check box enables or disables the DHCP server feature. • If this is enabled (checked), the DHCP Server automatically allocates an IP address to each of your wireless clients. Normally, this should be enabled. • If this is disabled (un-checked), each Wireless client should have a fixed IP address, set on the client. The VPN Passthrough enable check box enables or disables the VPN Passthrough feature. • If this is enabled (checked), this feature allows VPN clients to connect through MiFi 4510L to remote VPN Servers. Normally, this option should be enabled. • If this is disabled (un-checked), VPN clients are not allowed to connect. 56 System The Enable Logs check box enables or disables the System log feature. • If this is enabled (checked), you can view the system log on the Diagnostics screen. (See on page 60.) • If this is disabled (un-checked), you cannot view the system log on the Diagnostics screen. The Language menu changes the MiFi Settings Web UI language. The Date/Time Format menu changes the format of the date to reflect that used in the US or Europe. It changes the format of the time to a 12- or 24-hour clock. Buttons • Apply — Click this button to save changes. • Revert — Click this button to return to the previous settings. 57 Config File The Config File screen provides the ability to download (back up) a copy of the configuration settings from MiFi 4510L to a file on your computer, or restore (upload) a previously-saved configuration file from your computer to MiFi 4510L. This configuration file contains all settings for the Access Point and Router functions of the MiFi 4510L. You need the administration password to change this. The Config File screen is divided into the following sections: • Config File Download (See Config File Download on page 59.) • Config File Upload (See Config File Upload on page 60.) 58 Config File Download Click Download File to download a copy of the current configuration, and store the file on your computer. You are prompted to save the file; you can choose to rename it. 59 Config File Upload Use this feature to restore a previously-saved configuration file to MiFi 4510L. This overwrites all existing settings with the information stored in the config file. To upload a configuation file, follow these steps: ➊ Click Browse (Windows) or Choose File (Mac) to browse to the config file you previously downloaded to your computer. ➋ Click Upload File to begin uploading the chosen file. After upload finishes, the config file is immediately applied, and MiFi 4510L restarts. WARNING! Uploading a configuration file changes ALL of the existing settings to match the configuration file. If the Wi-Fi settings change, you will lose this connection, and will need to reconnect using the new settings. Buttons • Download File — Click this button to download a particular file. • Upload File — Click this button to upload a particular file. 60 Diagnostics The Diagnostics screen shows information about the MiFi 4510L firmware and other system-level information. You can also view the system log. This screen is used mostly for troubleshooting and is not required for normal operation. The Diagnostics screen is divided into the following sections: • System Information (See System Information on page 62.) • System Status (See System Status on page 63.) 61 System Information This section contains detailed information about the MiFi 4510L. MiFi • Manufacturer — The manufacturer of the MiFi 4510L. • Model — The model number or name of the MiFi 4510L. • IMEI — The International Mobile Equipment Identity (IMEI) number for the MiFi 4510L. • Serial No. — Each MiFi 4510L has a unique serial number. • Router FW Version — The router firmware version. • AP FW Version — For the Access Point component, the version of the firmware currently installed. • ICCID — The integrated circuit card identification. • SIM Status — The status of the SIM Card. Modem • MEID — The Mobile Equipment Identifier (MEID) is used by the mobile data network to identify this particular modem. • Phone No. (MDN) — The Phone Number or Mobile Directory Number (MDN) is used by the mobile data network to identify this particular data service. • MIN (MSID) — The Mobile Identification Number (MIN) or Mobile Station ID (MSID) is the number associated with the home service provider and the wireless phone number. • Home SID — System identifier for the home network. • Modem FW Version — The modem firmware version. • ERI Version — The version of the Enhanced Roaming Indicator (ERI), which allows the text portion of the roaming indication to be displayed. • PRL Version — The version of the Preferred Roaming List (PRL), which tells the modem which non-home carrier towers should provide roaming coverage. 62 System Status • Modem Status — Click this button to view more information about the modem status. This information is mostly used for troubleshooting. Buttons • Restart — Click this button to restart the MiFi 4510L. All Internet connections, and all Wi-Fi connections, are lost during the restart. • Reset to Factory Defaults — Click this button to reset all Access Point and Router settings to their factory default values. All existing settings are lost. WARNING! The "Reset to Factory Defaults" operation overwrites ALL existing settings. If the Wi-Fi settings change, you will lose this connection, and need to reconnect using the new settings. (See How do I reset the Access Point and Router settings back to factory settings? on page 62.) • System Log — Click this button to view the System Log. The System Log records various operations, and is mostly used for troubleshooting. 63 Port Forwarding The Port Forwarding feature allows incoming traffic (from the Internet) to be forwarded to a particular computer or device on MiFi 4510L's wireless network. Normally, incoming traffic from the Internet is blocked. You need to use Port Forwarding to allow Internet users to access any server you are running on your computer, such as a Web server, FTP server, or E-mail server. Also, for some online games, Port Forwarding must be used for the game to function correctly. The Port Forwarding screen has the following section: • Port Forwarding Applications (See Port Forwarding Applications on page 65.) IMPORTANT Port forwarding creates a security risk. This feature should be disabled when it is not required. 64 Port Forwarding Applications To use any of the common server applications listed, follow these steps: ➊ Install the application on a computer that is connected to MiFi 4510L's wireless network (WLAN). ➋ Ensure the computer is connected to MiFi 4510L, and record the computer's IP address for the MiFi Settings Web UI. ➌ On the Port Forwarding screen, type the computer's IP Address in the IP Address on WLAN field beside the application name. ➍ Enable the corresponding application on this screen by selecting its check box. ➎ Save your changes by clicking Apply. ➏ Click Home to go to the Home screen, and make a note of MiFi 4510L's IP address. Tell the person or company that needs port forwarding to connect to MiFi 4510L's IP address of the MiFi 4510L (by default, this is admin.mifi or 192.168.1.1). Connection requests are forwarded to the IP address specified in step 3. Buttons • Apply — Click this button to save changes made to port forwarding. • Revert — Click this button to return to the previous settings. IMPORTANT When no longer needed, the application should be disabled on this screen by de-selecting its check box, and saving change(s) by clicking Apply. Leaving applications enabled unnecessarily creates a security risk. 65 Power The MiFi 4510L can turn itself off when not in use. When using battery power, automatic shutdown greatly extends the battery life. To start up again, press the power button. The Power Management screen contains the following section: • Automatic Shutdown (See Automatic Shutdown on page 66.) Automatic Shutdown Select the desired shutdown time from the Shutdown drop-down menu and then click Apply. To prevent automatic shutdown, select Never. The timer options range from 2-60 minutes idle time, or never. When powered by the battery, the MiFi 4510L automatically shuts down after being idle for the selected time period, provided that no Wi-Fi devices are connected to the MiFi device. Timer settings have no effect when the MiFi 4510L is connected to the wall charger. Buttons • Click Apply to save changes. • Click Revert to return to previous settings. 66 Software Update The Update Software screen contains the following sections: • Update Status (See Update Status on page 67.) • Last Update (See Last Update on page 67.) • History (See History on page 67.) Update Status The Update Status section provides current software update information. To check for current software updates, click Check for Update. Last Update The Last Update section provides release information on the latest software update. History The History section provides the date, name and result of any software updates. If there have been no software updates, this section will be blank. 67 Troubleshooting4 Overview Common Problems and Solutions Technical Support Overview When properly installed, the MiFi 4510L is a highly reliable product. Most problems are caused by one of these issues: • System resources required by the device are being used by other devices. • Network coverage is unavailable due to coverage area, an account problem, or a network problem. The following tips can help solve many common problems encountered while using the device. First Steps • Make sure you are using the device in the correct geographic region. • Ensure that your wireless coverage extends to your current location. • Ensure you have an active subscription plan. • Restarting your computer and your modem can resolve many issues. IMPORTANT Before contacting support, be sure to restart both your computer and your device. 69 Common Problems and Solutions The following are some common troubleshooting solutions. My MiFi 4510L just powered off without my pressing the power button. Why? This may occur under any of the following circumstances: • Pressing the Master Reset button • Restarting the device • Switching profiles • Restoring the configuration settings • Battery depletion To restore battery power, follow these steps: ➊ Manually press the power button to turn it back on. ➋ If the battery is depleted, charge the device using the wall charger. How do I reset the MiFi 4510L device back to factory settings? The master reset button is in a small hole located on the bottom of the device, underneath the battery cover. This button returns the device to factory settings, including re-setting the network name (SSID) and network key (Wi-Fi passkey) to those printed on the sticker affixed to the back of the device. (The original SSID and password also appear on the front of the Connect Card.) To reset the device, follow these steps: ➊ Place one end of an unfolded paper clip into the master reset button hole. ➋ Press the paper clip on the button until the LED blinks green one full blink plus a very brief blink (about five seconds). 70 How do I reset the Access Point and Router settings back to factory settings? To reset the access point and router settings, follow these steps: ➊ Connect to MiFi Settings by connecting your computer to the MiFi wireless network and going to admin.mifi or 192.168.1.1 in your browser. ➋ Connect to the Diagnostics screen. (See Diagnostics on page 61.) The Diagnostics screen has a Reset to Factory Defaults button. This button resets all Access Point and Router settings to their factory default values. All existing settings are lost. The password on or inside the device does not work. What should I do? Your SSID and Wi-Fi Admin password appear on the back of your device. If you do not have a password label on the back of your MiFi 4510L, follow these steps: ➊ Open the device and use the password printed on the password label underneath the battery. ➋ If the password on or inside the device does not work, call Customer Service at 1-800-786-8419. 71 Customer Service For Customer Service while in the U.S. or Canada, contact Verizon Wireless at 1-800-786-8419. Data Technical Support For additional information and technical support for Verizon Wireless devices, you can visit the Verizon Wireless Data Technical Support page at support.verizonwireless.com/contact_us. 72 Product Specifications and Regulatory Information5 Product Specifications Regulatory Statements Wireless Communications Limited Warranty and Liability Safety Hazards Proper Battery Use and Disposal Product Specifications General Name: Verizon JetpackTM Mobile Hotspot - MiFi® 4510L Model: MiFi 4510L Approvals: FCC (North America); IC (Canada) Weight: 85 g / 3 oz Dimensions: 90 mm x 60 mm x 13 mm, 3.54 in x 2.36 in x 0.51 in Wireless Network – Dual Mode: LTE, CDMA 1X/EV-DO Rev A Wireless Network – Wi-Fi Mode 802.11 b/g/n Default SSID Verizon MIFI4510L XXXX Secure (see the sticker on the back of your device or on the front of your Connect Card for your SSID and Wi-Fi/Admin password) Battery • Size • Time required for full charge 1500 mAh 2.5-3 hours (when not in use) Chip Set: QUALCOMM® MDM9600 Interface Type: Type B USB Port for micro USB, used by the wall charger Technology/Bands Technology: LTE, CDMA Rev A, Rev 0, 1XRTT Band Designation: LTE 700 MHz CDMA 1x/EV-DO RA; 800/1900 MHz Transmit Band: 824.7-848.31 MHz/1851.25-1908.75 MHz Receive Band: 869.7-893.31 MHz/1931.25-1988.75 MHz Environmental Operating Temperature: -10 ° C to +45° C (14°F to 113° F) Storage Temperature: -20° C to 60° C (-4° F to 140° F) Drop: 1 meter (3.28 feet) drop, no damage – fully operational Vibration Stability: 5 Hz to 500 Hz, 0.1 octave/second 74 Regulatory Statements Federal Communications Commission (FCC) and Industry Canada (IC) Notice Electronic devices, including computers and wireless modems, generate RF energy incidental to their intended function and are therefore subject to FCC rules and regulations. This equipment has been tested to, and found to be within the acceptable limits for a Class B digital device, pursuant to part 15 of the FCC Rules and Industry Canada ICES-003. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment. This equipment generates radio frequency energy and is designed for use in accordance with the manufacturer’s user manual. However, there is no guarantee that interference will not occur in any particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures. • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and the receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/television technician for help. This device complies with Part 15 of the Federal Communications Commission (FCC) Rules and with Industry Canada ICES-003. Operation is subject to the following two conditions. • This device may not cause harmful interference. • This device must accept any interference received, including interference that may cause undesired operation. WARNING: DO NOT ATTEMPT TO SERVICE THE WIRELESS COMMUNICATION DEVICE YOURSELF. SUCH ACTION MAY VOID THE WARRANTY. THE MiFi 4510L MODEM IS FACTORY TUNED. NO CUSTOMER CALIBRATION OR TUNING IS REQUIRED. CONTACT NOVATEL WIRELESS TECHNICAL SUPPORT FOR INFORMATION ABOUT SERVICING YOUR WIRELESS COMMUNICATION DEVICE. FCC CAUTION: Any changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. MODIFICATIONS: The FCC requires that you be notified that any changes or modifications made to this device that are not expressly approved by Novatel Wireless, Inc. may void your authority to operate the equipment. NOTE: The Radio Frequency (RF) emitter installed in your modem must not be located or operated in conjunction with any other antenna or transmitter, unless specifically authorized by Novatel Wireless Technologies. RF Exposure Content FCC Equipment Authorization ID: PKRNVWMIFI4510 Industry Canada Certification Number: 3229B-MIFI4510 Model: MIFI4510L This device is authorized for use in mobile and portable applications. At least 12 mm (0.5 inches) of separation between the antenna and the user’s body must be maintained at all times. This product has been evaluated for SAR and meets the FCC and IC Guidelines for exposure to radio waves. 75


FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE - USER MANUAL

OWNER GUIDE - OWNER MANUAL

REFERENCE GUIDE - REFERENCE MANUAL

INSTRUCTION GUIDE - INSTRUCTION MANUAL

Leave a Reply