VANKYO BURGER 101 (01) PDF MANUAL

VANKYO BURGER 101 (01) PDF SUMMARY:

How do I turn on the projector?

Plug the power cable into the projector and the socket; switch the ON/OFF Switch to ON; press the Power button to turn the projector on.

---

How do I turn off the projector?

Press the Power button once, then select Confirm to turn off the projector; switch off the ON/OFF Switch to OFF.

---

Can the projector be used to charge other devices?

Yes, this projector is equipped with a built-in Li-ion rechargeable battery which can provide power supply to other mobile devices through the USB port when needed.

---

What do the LED lights indicate when charging the projector?

When the projector is fully charged, the LED light will turn off. While charging, the LED light will be blue.

---

What is an important thing to keep in mind to avoid electrical fires?

To avoid turning on the projector accidentally which may lead to electrical fires, switch the ON/OFF Switch to OFF.

---

Is it okay to use the projector as both a projector and a power bank simultaneously?

No, it is not recommended to use it as a projector and power bank at the same time.

---

How do I adjust the focus of the projector?

Slightly adjust the focus ring on the projector to get the best image.

---

Does the projector have automatic keystone correction?

Yes, the projector supports automatic vertical Keystone correction within a degree of ±40.

---

How do I connect the projector to Wi-Fi?

Go to Homepage> Setup> Network> WiFi, then select Scan to display the Wi-Fi list; press the Up/Down button to select your Wi-Fi, then press the OK button to continue; enter the correct password, then select Confirm to get Internet connection.

---

How do I project from a USB drive?

Turn on the projector and insert your USB disk into the USB port; Go to Homepage to select Media, it will display an interface for projecting from a USB Disk.

---

How do I play a video from a USB drive?

Select Movie, then find your video file and play it by pressing the OK button. To watch 3D video, please press the 3D button on the remote when playing it (3D video source is required and 3D glasses are not included).

---

How do I play an audio file from a USB drive?

Select Music to find your audio file. Select it first by pressing the OK button, then select the Play option to start playing.

---

How do I project a photo from a USB drive?

Select Photo, then find your photo and play it by pressing the OK button.

---

How do I project a text file from a USB drive?

Select Text, then find your text file and open it by pressing the OK button.

---

What text file formats does the projector support?

The projector supports TXT text files.

---

What image file formats does the projector support?

The projector supports JPG/JPEG/BMP/PNG image files.

---

What audio file formats does the projector support?

The projector supports MP1/MP2/MP3/WMA/WAV/OGG/FLAC/MC/M4A audio files.

---

What video file formats does the projector support?

The projector supports MPEG1/MPEG2/MPEG4/H.264/MVC/H.263/DAT/MPG/VOB/TS/AVI/MKV/MP4/MOV/3GP/FLV video files.

---

How do I project from an HDMI input connection?

Turn on the projector, then connect the projector to your device with the provided HDMI cable; Go to Homepage, then select HDMI to project the contents from your device to the screen/wall.

---

How do I play videos in KOALA and YouTube?

Go to Homepage> KOALA/YouTube to play videos after the projector is connected to your Wi-Fi.

---

How do I return to the Home Page of KOALA/YouTube?

Press the Menu button on the remote to get back to the Home Page of KOALA/YouTube.

---

How do I use screen mirroring for an iOS device?

Connect your iOS device and the projector to the same Wi-Fi network; Go to Homepage> iOS Cast to display the interface; swipe your iOS device up, then tap Screen Mirroring/AirPlay Mirroring and search for the projector; select ZYCast-xxxx(icast) from the searching list. Your iOS device display will be projected on the wall/screen.

---

How do I use screen mirroring for an Android device?

Turn the Wi-Fi to ON status in the settings of your Android device. To make a smoother streaming, please do not connect to any Wi-Fi on your projector; Go to Homepage> Miracast to enter the interface; activate Multi-Screen function in your Android device and search for the projector; select ZYCast-xxxx(mcast) from the searching list. Your Android device display will be projected on the wall/screen.

---

Where can I adjust the settings of the projector?

Go to Homepage> Setup to adjust the settings of your projector.

---

What settings can I adjust under ‘Network’?

You can connect the projector to your Wi-Fi.

---

What settings can I adjust under ‘Projection’?

You can set up brightness mode, brightness level, projection mode, and Keystone configurations.

---

What settings can I adjust under ‘Advanced’?

You can change the language, update the firmware, select the boot channel, set up the sleep timer, make a factory restore, etc.

---

What information can I check under ‘Information’?

You can check the memory, software version, etc.