Post questions, comments, reviews or page errors in the comment box below.

Click here to download TP-LINK ARCHER C7 (03) PDF MANUAL

PDF Content Summary:

****** Page 1 ****** tp-link Quick Installation Guide ACI 750 Wireless Dual Band Gigabit Router Archer C7 Connect the Hardware If your internet connection is through an Ethernet cable directly from the wall instead of through a DSL/CabIe/SateIIite modem, connect the Ethernet cable to the router’s Internet port, and then follow Stepl 5 and 6 to complete the hardware connection. 41 2 3 4 Power adapter Router Turn off the modem, and remove the backup battery if it has one. Connect the modem to the router’s Internet port with an Ethernet cable. Turn on the modem, and then wait about 2 minutes for it to restart. 1 nstall the antennas. 6 Verify that the following LEDs are on and solid to confirm the hardware is connected correctly. 5 Connect the power adapter to the router and turn on the router. Internet Modem Power adapter Power On 2.4GHz On Internet 5GHz On On (Green or Orange) Note: If the 2.4GHz LED and 5GHz LED are oft press and hold the WPS/Wi-Fi button on the back for more than 2 seconds. Both the LEDs should turn solid on.

****** Page 2 ****** Configure the Cloud Router Method ONE: Via TP-Link Tether App 1. Download the Tether app. b Click the network icon of your computer or go to Wi-Fi settings of your smart device, and then select the SSID to join the network. TP-Link Cloud Service TP-Link Cloud service provides a better way to manage your cloud devices. For Computer Connections are available or Smart Device Network Map page to check whether the internet IP address is valid or not. If it is, please run the Quick Setup again; otherwise, check the hardware connection. Reboot your router and try again. For cable modem users, log in to the web management page of the router. Go to Advanced > Network > Internet > MAC Clone, click Use Current Computer MAC Address and click Save. Then reboot both the modem and the router. Q3. How do I restore the router to its factory default settings? • With the router powered on, use a pin to press and hold the Reset button on the back until the Power LED blinks. Log in to the web management page of the router, go to Advanced > System Tools > Backup & Restore, and click Factory Restore. The router will restore and reboot automatically. Q4. What should I do if I forget my web management page password?? • Ifyou are using a TP-Link ID to log in, click Forgot password on the login page and then follow the instructions to reset it. • Alternatively press and hold the Reset button on the back of the router until the Power LED blinks to reset it, then visit to create a new login password. Q5. What should I do if I forget my wireless network password? • If you have not changed the default wireless password, it can be found on the label at the bottom of the router. Connect a computer directly to the router using an Ethernet cable. Log in to the router’s web management page at, and go to Basic > Wireless to retrieve or reset your wireless password. For technical support and other information, please visit k-•/ or simply scan the QR code.







Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.