FREE ENGLISH TOSHIBA E-STUDIO5528A (01) PDF USER GUIDE
FREE ENGLISH TOSHIBA E-STUDIO5528A (01) PDF USER MANUAL
FREE ENGLISH TOSHIBA E-STUDIO5528A (01) PDF OWNER GUIDE
FREE ENGLISH TOSHIBA E-STUDIO5528A (01) PDF OWNER MANUAL
FREE ENGLISH TOSHIBA E-STUDIO5528A (01) PDF REFERENCE GUIDE
FREE ENGLISH TOSHIBA E-STUDIO5528A (01) PDF INSTRUCTION GUIDE
FREE ENGLISH TOSHIBA E-STUDIO5528A (01) PDF REFERENCE MANUAL
FREE ENGLISH TOSHIBA E-STUDIO5528A (01) PDF INSTRUCTION MANUAL
FREE ENGLISH TOSHIBA E-STUDIO5528A (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD TOSHIBA E-STUDIO5528A (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
When should I read the manual?
Read this manual before using the functions.
What does the term “default settings” refer to?
This equipment is under its “default settings” when the power is turned on, namely, if no setting change has been applied yet, the equipment’s settings return to the default ones when the energy saving mode is cleared or the [FUNCTION CLEAR] button on the control panel is pressed.
How can I confirm the set functions?
If you press [Settings] on the touch panel, the menu is displayed. On this menu, you can view the functions that are currently set.
How do I switch to the function setting menu?
To change the functions on the current menu, press the corresponding buttons. The desired setting menu will then appear.
How can I clear the set functions?
If you want to clear any copy function setting, press [Reset] on the corresponding setting menu. However, for Full Image on the Edit menu, also press the highlighted button to clear the setting.
How can I clear all settings changed?
When you press the [FUNCTION CLEAR] button on the control panel, all the function changes will be cleared. Even if you do not do so, the changes will be cleared if the equipment is left idle for 45 sec. (default setting).
What is the basic copying procedure?
Make sure that paper is placed in the drawer(s).
Place the original(s).
Enter the desired number of copies on the touch panel if you want more than one copy.
Select the copy modes as required.
Press the [START] button on the control panel.
How can I stop and restart copying?
Press [Stop] on the touch panel.
Press [Job Cancel] on the touch panel to stop copying.
Press [Next Copy] on the touch panel or the [START] button on the control panel to restart.
How can I scan the next original during copying using auto job start?
Set the number of copy sets and the copy modes as required.
Press the [START] button on the control panel.
How can I scan the next original during copying using priority job?
Press [Interrupt Priority] and select [Priority].
Set the number of copy sets and the copy settings as required.
Press the [START] button.
How can I interrupt copying and make other copies (interrupt copying)?
Press [Interrupt Priority] and select [Interrupt].
Select other copy modes as required.
Press the [START] button.
How can I make one copy as a sample (proof copy)?
Select the number of copy sets and copy modes.
Press [Proof Copy] on the touch panel.
Press the [START] button on the control panel.
Change the number of copy sets and copy modes as required after checking the proof copy.
Press the [START] button on the control panel.
How can I specify the orientation of originals?
Press a paper direction button on the Basic menu, matching the orientation of the placed original.
How can I make an Automatic Paper Selection (APS)?
Press [APS] on the touch panel.
Select other copy modes as required, and then press the [START] button on the control panel.
How can I select the drawer for the desired paper manually?
Press the drawer button corresponding to the desired paper size.
Select other copy modes as required, and then press the [START] button on the control panel.
How can I copy mixed-size originals in one operation?
Press [Zoom] on the Basic menu.
Press [Mixed Size].
Select a paper size.
Select other copy modes as required, and then press the [START] button on the control panel.
How can I copy onto recycled paper, thick paper?
When you place recycled paper, thick paper in the drawer, set the thickness and attribute into this equipment.
How can I copy onto thin paper, sticker labels, or special paper?
Thin paper, sticker labels, or special paper can be used to make copies by using the bypass tray. Place such paper on the bypass tray and set the thickness and attributes into this equipment before you start copying.
How can I specify and copy cover sheets or paper to insert?
Cover sheets or paper to insert a specific page can be prepared and copied in a drawer different from an ordinary drawer. Place paper in a drawer and set attribute as the paper type.
What is the procedure for bypass copying?
The operating procedure for bypass copying differs depending on the paper size to be used. See the table below for the operating procedure of each size.
| Paper size | Procedure |
|---|---|
| Other than North America: A3, A4, B4, B5 North America: LD, LT, LG, ST-R | P.32 “Copying on A3, A4, B4 and B5 size paper (in equipment other than for North America) / LD, LT, LG and ST-R size paper (in equipment for North America)” |
| Other than the above | P.34 “Copying on other than the above standard sizes of paper” |
| Envelope | P.36 “Copying on an envelope” |
| Others (Non-standard sizes) | P.37 “Bypass copying on non-standard size paper” |
How can I copy on A3, A4, B4 and B5 size paper (in equipment other than for North America) / LD, LT, LG and ST-R size paper (in equipment for North America)?
Place paper on the bypass tray.
Select the same size button under “Copy” as that of the paper you placed on the bypass tray.
Press [Paper Type] on the touch panel if the paper type of the paper you placed on the bypass tray is other than plain paper.
After setting the paper size and type, press [OK].
Select other copy modes as required, and then press the [START] button on the control panel.
How can I copy on other than the above standard sizes of paper?
Place the original(s) and paper on the bypass tray.
Press [Size Setting] on the touch panel.
Press the button of the same size as the paper you placed on the bypass tray.
Press [Other] under “Copy”.
Press [Paper Type] if the paper you placed on the bypass tray is other than plain paper.
After setting the paper size and paper type, press [OK].
Select other copy modes as required, and then press the [START] button on the control panel.
How can I copy on an envelope?
Place the original on the original glass.
Place paper on the bypass tray.
Press [Size Setting] on the touch panel.
Press the button of the same size as the envelope you placed on the bypass tray.
Press [Other] under “Copy” and press [OK].
Select other copy modes as required, and then press the [START] button on the control panel.
How can I bypass copying on non-standard size paper?
Place the original.
Place paper on the bypass tray.
Press [Custom Paper] on the touch panel.
Key in the dimension, and press [OK].
Select other copy modes as required, and then press the [START] button on the control panel.
How can I change the exit tray?
The exit tray currently selected is displayed on the equipment status indication area. To change the exit tray, press [Exit Tray]. Every time you press this, the display changes from the exit tray of the equipment, each exit tray of the finisher and Job Separator, and automatic selection in this order.
How can I switch color modes (Color Model only)?
Press any of [Full Color], [Black] or [Auto Color] on the touch panel.
How do I use automatic density adjustment?
Press [Auto] on the touch panel.
How do I use manual adjustment?
Press either or to select the desired density level.
How do I select desired paper size with Automatic Magnification Selection (AMS)?
Press [Zoom] on the Basic menu.
Select the desired paper size, press [AMS] and then [OK].
Place the original(s).
How do I specify both the original size and the copy paper size separately?
Press [Zoom] on the Basic menu.
Select the desired sizes for the original and copy paper, and then press [OK].
How do I register paper sizes to “Other” size?
Press [Size Setting] on the touch panel.
Select the desired size.
How do I register non-standard size in the memory?
Follow the procedure for bypass copying on non-standard size paper.
Register dimensions.
How do I specify reproduction ratio manually?
Press [Zoom] on the Basic menu.
Press the buttons below to select the desired reproduction ratio.
Select the desired size, and then press [OK].
How do I copy photo originals in the optimal reproduction ratio for copy paper size (Photo Zoom) (Color Model only)?
Press [Zoom] on the Basic menu.
Press [Photo Zoom].
Select the original size.
Select the desired copy paper size, and then press [OK].
Select other copy modes as required, and then press the [START] button on the control panel.
Place the next original, and then press [Next Copy] on the touch panel or the [START] button on the control panel.
When the scanning of all the originals is finished, press [Job Finish] on the touch panel.
How do I set photo originals in other sizes?
Press [Custom] on the touch panel.
Key in the size of the original, and press [OK].
How do I reduce images to scan the entire original, including the edges (Full Image) (Color Model only)?
Press [Zoom] on the Basic menu.
Select sizes for the original and copy paper, and press [OK].
Press [Full Image] on the Edit menu.
How do I select Finishing Mode?
Press [Finishing] on the Basic menu.
How do I select [Sort] or [Group] modes?
Press [Finishing] on the Basic menu.
Select [Sort] or [Group], and then press [OK].
Key in the desired number of copies on the Basic menu.
How do I select [Rotate Sort] mode?
Press [Finishing] on the Basic menu.
Select [Rotate Sort], and then press [OK].
Key in the desired number of copies on the Basic menu.
How do I select the direction in Staple sort mode?
Press [Finishing] on the Basic menu.
Press the button for the staple position, select the direction that matches the original you set from “Original Direction”, and press [OK].
How do I use Duplex Copying?
Press [2-Sided] on the Basic menu.
How do I make a 1-sided copy?
Press [2-Sided] on the Basic menu.
Select the desired mode and original direction, and then press [OK].
How do I make a 2-sided copy?
Press [2-Sided] on the Basic menu.
Select the desired mode, book or tablet of original and paper, and original direction, and then press [OK].
How do I make a 2-sided copy from a book-type original?
Press [2-Sided] on the Basic menu.
Select [Book -> 2].
Select the start page to be scanned and page layout.
Press [OK].
Press the drawer button corresponding to the desired paper size.
Select other copy modes as required.
Place the original on the original glass.
Press the [START] button on the control panel. Once the pages are scanned, set the next ones on the original glass.
When all the pages have been scanned, press [Finished].
How do I select the original mode?
Press [Original Mode] on the Basic menu.
Select the original mode, and then press [OK].
How do I display the Edit Menu?
You can display the Edit menu by pressing the [Edit] tab on the touch panel when you want to use various editing functions.
How do I create top, bottom, left, and right margins?
Press [Image Shift] on the Edit menu.
Select the type of binding margin.
Adjust the width of the binding margin, and press [OK].
Press [OK].
How do I create bookbinding margins?
Press [Image Shift] on the Edit menu.
Press [Book].
Adjust the width of the binding margin, and press [OK].
Press [OK].
How can I clear dirty edges of originals (Edge Erase)?
Press [Edge Erase] on the Edit menu.
Adjust the width of the part to be erased, and press [OK].
How can I clear shadows in the Center of Book-type Originals (Book Center Erase)?
Select the drawer for the desired paper size.
Press [Book Center Erase] on the Edit menu.
Adjust the width of the part to be erased, and press [OK].
Place the original on the original glass.
How do I copy the Sides of Book-type Originals Separately (Dual Page)?
Press [Dual Page] on the Edit menu.
Press [1 Side] or [2 Side].
Select other copy modes as required.
Press the [Basic] tab to display the Basic menu, and then select A4, B5 or LT as the copy paper size.
Open the desired page of the original and place it on the original glass.
Press the [START] button on the control panel.
When all the pages have been scanned, press [Finished].
How do I copy Multiple Originals onto One Sheet (2 in 1 / 4 in 1)?
Press [2 in 1/4 in 1] on the Edit menu.
Perform 2 in 1 / 4 in 1 setting, and press [OK].
How do I center a Scanned Image (Centering Copy)?
Press [Centering Copy] on the Edit menu.
Press [OK].
How do I use editing Scanned Images?
Press [Editing] on the Edit menu.
How can I use trimming and masking?
Press [Editing] on the Edit menu.
Select [Trim] or [Mask].
Place the original on the original glass with its face up.
Read the values to specify the area using the left and top scales on the original glass.
Key in the read values, and press [OK].
Place the original again on the original glass with its face down.
How can I use mirror image and negative/positive reversal?
Press [Editing] on the Edit menu.
Select [Mirror] or [Neg/Pos], and then press [OK].
How can I copy the Same Image Repeatedly on One Sheet (Image Repeat) (Color Model only)?
Press [Image Repeat] on the Edit menu.
Place the original on the original glass with its face up.
Read the following 4 values to specify the area using the left and top scales on the original glass.
Key in the read values and specify the repeat count, and press [OK].
Place the original again on the original glass with its face down.
How can I use Adjusting Color Balance (CMYK adjustment) (Color Model only)?
Press [Color Balance] in the Image menu.
Press or + of each color to obtain the desired color balance.
How can I use Adjusting RGB (Color Model only)?
CLICK HERE TO DOWNLOAD TOSHIBA E-STUDIO5528A (01) PDF MANUAL