THRUSTMASTER ESWAP X2 H.E. (01) PDF Document

Free English THRUSTMASTER ESWAP X2 H.E. (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.

CLICK HERE TO DOWNLOAD THRUSTMASTER ESWAP X2 H.E. (01) PDF DOCUMENT

If this is not the document you want for this product, click here to see if we have any other documents for this product.

How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.

What are the components of the THRUSTMASTER ESWAP X2 H.E. gamepad?

The THRUSTMASTER ESWAP X2 H.E. gamepad components are:

Swappable directional buttons module
Swappable stick modules
RB/LB buttons
View/Menu buttons
Share button
Microphone status led
Profile led
Xbox button
Action buttons
1/8″/3.5 mm audio port
Swappable grips
Proprietary USB cable
USB-C port
Swappable progressive RT/LT triggers
RT/LT trigger locks
Buttons 1-2-3-4
Volume +/Volume-/Mic mute buttons
Profile 1/Mapping/Profile 2 buttons

What is included in the box contents for the THRUSTMASTER ESWAP X2 H.E.?

The box contents for the THRUSTMASTER ESWAP X2 H.E. include:

The gamepad itself (implied by the visual representation showing the main assembly)
Swappable directional buttons module (implied by visual)
Swappable stick modules (implied by visual)
Swappable grips (implied by visual)
Proprietary USB cable (implied by visual)
A small bag (implied by visual)
The user manual (implied by visual)

How do I swap the grips on the THRUSTMASTER ESWAP X2 H.E.?

To swap the grips on the THRUSTMASTER ESWAP X2 H.E.:

Step 1: Pull the existing grip off the gamepad.

Step 2: Align the new grip with the gamepad body.

Step 3: Push the new grip onto the gamepad body until it clicks into place.

How do I swap the progressive RT/LT triggers on the THRUSTMASTER ESWAP X2 H.E.?

To swap the progressive RT/LT triggers on the THRUSTMASTER ESWAP X2 H.E.:

Step 1: Press the release button located behind the trigger you wish to swap.

Step 2: Pull the trigger module out from the gamepad.

Step 3: Align the new trigger module with the slot on the gamepad.

Step 4: Push the new trigger module into the slot until it locks into place.

How do I adjust the trigger travel on the THRUSTMASTER ESWAP X2 H.E.?

To adjust the trigger travel on the THRUSTMASTER ESWAP X2 H.E., you can select between Long travel and Short travel.

Long travel provides a full range of motion (100%).

Short travel provides a reduced range of motion (0% to 50% range shown).

To perform the adjustment, access the settings in the ThrustmapperX software, specifically under the TRIGGERS section.

How do I update the firmware for the THRUSTMASTER ESWAP X2 H.E. gamepad?

The firmware included in the THRUSTMASTER ESWAP X2 H.E. gamepad can be updated to a more recent version featuring product enhancements. To update the firmware, launch the ThrustmapperX software and follow the instructions provided within the software.

How do I perform advanced mapping and customisation on the THRUSTMASTER ESWAP X2 H.E.?

To perform advanced mapping and customisation on the THRUSTMASTER ESWAP X2 H.E., you need to download and install the ThrustmapperX software for Xbox/Windows 10/11 from the Microsoft Store on your Xbox or PC.

The software allows configuration for MINI-STICKS, TRIGGERS, and VIBRATIONS.

How do I select the mapping profile on the THRUSTMASTER ESWAP X2 H.E.?

To select the mapping profile on the THRUSTMASTER ESWAP X2 H.E., use the Profile 1/Mapping/Profile 2 buttons.

The Profile LED indicates the currently active profile.

How do I modify the mapping of one of the two profiles on the THRUSTMASTER ESWAP X2 H.E.?

To modify the mapping of one of the two profiles on the THRUSTMASTER ESWAP X2 H.E., follow these steps:

Step 1: Select the profile to modify, then press the MAP button. The profile LED flashes.

Step 2: Press and hold the button you want to modify (1, 2, 3 or 4).

Step 3: Press the button you want to assign. The gamepad vibrates to indicate that the change is applied. The profile LED stops flashing and turns solid.