TEFAL HV589 (01) PDF Document

For your safety, the TEFAL HV589 complies with applicable standards and regulations. Please observe the following precautions:

• The appliance’s accessories become very hot during use. Avoid contact with your skin.

• Ensure the supply cord never comes into contact with the hot parts of the appliance.

• Check that the voltage of your electricity supply matches the voltage of your appliance. Connecting the appliance to the wrong voltage can cause irreparable harm not covered by the guarantee.

Yes, due to the proximity of water, please follow these critical safety rules:

• For additional protection, the installation of a residual current device (RCD) with a rated residual operating current not exceeding 30 mA is advisable in the electrical circuit supplying the bathroom. Ask an installer for advice.

• The crossed bath tub symbol on the appliance means you must not use this appliance near bathtubs, showers, basins, or other vessels containing water.

• When the appliance is used in a bathroom, unplug it immediately after use. The proximity of water presents a hazard even when the appliance is switched off.

This appliance can be used by children aged 8 years and above, and by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, provided they have been given supervision or instruction concerning the safe use of the appliance and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance should not be performed by children without supervision.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard. Do not use the appliance if the cord is damaged.

You should stop using your appliance and contact an Authorised Service Centre if your appliance has fallen or if it does not work correctly. Additionally, if the cable is damaged due to continuous bending, it may expose you to the risk of sparks; please stop using it immediately.

In case of overheating, a heat-sensitive safety device will stop the dryer automatically. If this occurs, check and clean the inlet and outlet grills. If the problem persists, contact the After-Sales Service.

To ensure safe and proper use, please follow these guidelines:

• The appliance must be unplugged before cleaning and maintenance, if it is not working correctly, as soon as you have finished using it, or if you leave the room, even momentarily.

• Do not immerse or put under running water, even for cleaning purposes.

• Do not hold with damp hands.

• Do not hold the appliance by the casing, which gets hot, but by the handle.

• Do not unplug by pulling on the cord; rather, pull out by the plug.

• Do not use an electrical extension lead.

• Do not clean with abrasive or corrosive products.

• Do not use at temperatures below 0°C (32°F) and above 35°C (95°F).

When storing the product, wind the cord loosely and leave a free space where it connects to the appliance to avoid damage and bending of the cord.

1. Turn on the appliance and set it to Temperature 2 and Speed 2. This ideal setting will preserve the beauty of your hair.

2. For quick drying, use the oscillating Moving Air Booster nozzle. Plug the Moving Air Booster nozzle on the hair dryer to activate the sweeping movement of the airflow (according to model).

Your appliance contains valuable materials which can be recovered or recycled. To dispose of it, leave it at a local civic waste collection point.