TECHNIKA 32A23B-HD (01) PDF Document

Here are the technical specifications for the TECHNIKA 32A23B-HD:

*1: Energy consumption XYZ kWh per year, based on the power consumption of the television operating 4 hours per day for 365 days. The actual energy consumption will depend on how the television is used.

*2: When the TV is turned off with the remote control/standby button and no function is active.

*Built in JBL Speaker system (full-range speaker and tweeter)

Included with your TECHNIKA 32A23B-HD TV are the following accessories:

1 x Quick Start Guide

1 x Remote Control and 2 x AAA Batteries

1 x Safety Leaflet

1 x RF Cable

1 x Mini YPbPr Cable (Required if you wish to connect a device with YPbPr/ Component output to the TV’s Mini YPbPr Input)

1 x Stand installation pack

Here’s how to use the remote control for your TECHNIKA 32A23B-HD:

STANDBY: Switch on the TV when in standby or vice versa. By long pressing of this button, the set will display a menu offering power down option to energy saving standby mode.

SOURCE: To display the input/source menu.

NUMBER BUTTONS: 0-9 to select a TV channel directly.

MUTE: Mute the sound or vice versa.

TV GUIDE: Opens the 7 day TV guide (digital TV mode).

VOL (+/-): To increase/decrease the sound level.

The Google Assistant: Use your voice to access entertainment, control smart devices, obtain answers on screen, and more.

HOME: Display the TV Home Menu.

CH (+/-): To increase or decrease the channel being watched.

MENU: Display LIVE TV menu. This button works only in sources (TV, HDMI, Component, etc.). It will not work in the Home Menu.

INFO: Press once for now/next channel information.

(A/7/4/7/OK): Allows you to navigate the on-screen menus and adjust the system settings to your preference.

BACK: To go back a previous step.

EXIT: To exit all menus.

NETFLIX: Access the Netflix App.

Prime video: Access the Prime video App.

YouTube: Access the YouTube App.

Freeview Play: Access the Freeview Play app.

MTS: Opens audio track menu.

TEXT: To enter/exit teletext.

SUB: To switch the dialogue at the bottom of the screen (on/off).

TV: To switch to Live TV.

►II: To play/pause media

: To play in fast rewind mode

►►: To play in fast forward mode

: To stop the playback

COLOUR BUTTONS: Execute corresponding function at that time

If you wish to use your Sky remote to operate the TECHNIKA 32A23B-HD TV’s basic functions, you will need a Sky remote control (Revision 9 or later) and you will need to program it with the code 2134. If you wish to use your Sky Q remote to operate the TV’s basic functions, you will need to program it with the code 4170.

Follow these steps to safely install the TV stand for your TECHNIKA 32A23B-HD:

Step 1. Place the TV set on a flat and clean surface with the panel facing downwards to avoid damage.

Step 2. When fitting the feet, the longest part of the foot needs to be at the front of the set. In addition these should be pointing away from each other as shown in the picture above.

Step 3. When the stand feet are in the correct position, secure the stand feet to the TV using the 4 screws provided.

Remove the battery cover from the rear of the remote control and insert the AAA batteries which are supplied in the accessory pack. Ensure that the polarity of the batteries is as shown in the battery compartment. Replace the battery cover. The remote control is ready for use.

Step 1. Connect the TV to your power socket.

Step 2. If you wish to use the TV to receive Freeview/Saorview channels, connect the RF input from the TV to your outdoor Digital TV aerial. If you do not wish to receive Freeview/Saorview, skip this step.

Step 3. Connect to the internet. Ethernet provides the most stable connection.

Here are the button layouts on the TECHNIKA 32A23B-HD:

1. Standby Power On/Off

2. Displays the input source menu

3. Displays Menu/OSD

4. Programme/Channel down and menu down

5. Programme/Channel up and menu up

6. Volume down and menu left

7. Volume up and menu right

Here’s how to wall mount your TECHNIKA 32A23B-HD TV:

Step 1. Remove the four screws that are supplied in the wall mounting holes.

Step 2. The wall mount can now be easily attached to the mounting holes on the rear of the TV.

Step 3. Install the wall mounting bracket to the television as advised by the bracket manufacturer.

The picture shows the use of spacers, which are not applicable to all sets/installations.

When the set first turns on, it will ask you to select your preferred on-screen display language. This will change the language in which the menus and associated information is displayed in.

During the set-up process, Android Phone users will be prompted to sign-in to your Google account using your pre-installed “Google” app. This set up process will depend upon which model TV you are setting up. Please ensure you have your account details to hand.

Use the remote control keys:

Press up to navigate up

Press to confirm a selection

Press to navigate right

Press to navigate left

Press to navigate down

If during the first time installation process the remote was not paired or skipped, then follow the process below to pair your remote with the television.

Step 1. Turn the set on.

Step 2. Press the button on the remote control.

Step 3. The LED indicator on the remote will illuminate and the pairing screen will appear on the TV.

Step 4. Now press and hold the “Left” and “Home” buttons on the remote simultaneously.

Step 5. The LED indicator on the remote control will start to flash.

Step 6. Select the detected remote control shown on the screen and press OK.

Step 7. Once paired the pairing screen will disappear.

This process will only need to be carried out if the remote is not paired. Once paired, when the button is pressed it will open the Google Assistant screen on the set and activate voice functionality.

Remote controls with the Google Assistant have a Google Assistant dedicated button and a built-in microphone. To use this feature with the Google Assistant remote control, follow the instructions as below:

Step 1. Before using the Google Assistant, you will need to pair the remote. Please follow step 5 of this guide to pair your remote to enable the Google Assistant.

Step 2. Press the button. The LED indicator on the remote control will illuminate.

Step 3. Wait for the on-screen message from the Google Assistant, then speak into the microphone. A good rule of thumb is to have the microphone positioned about 15-30 centimetres away from your mouth.

By speaking into the microphone, you can search for various content or control your connected smart home devices. Speech examples may be displayed on the television screen depending on your model.

Here are the connectivity options and their descriptions for the TECHNIKA 32A23B-HD:

* The Ethernet/LAN port is used for Freeview HD services and smart functions.