SYBONY SC311 (01) PDF Document

The SYBONY SC311 features the following components:

1. TF card slot

2. Blue light indicator

3. Red light indicator

4. Power button

5. Reset button

6. Type-C interface

7. Antenna

8. CS-C Adapter

1. Using the IMX662 high-sensitivity sensor, it offers low readout noise, high well capacity, and no blooming.

2. With WiFi wireless connectivity, you can free yourself from the limitation of wires and enjoy the freedom in usage. It can simultaneously connect up to 4 smartphones or tablets for sharing the joy of astronomy.

3. It allows for both short and long exposures and adjustable gain, making it suitable for capturing various celestial objects.

4. The built-in 2400mAh lithium battery provides approximately 4 hours of continuous operation on a full charge.

5. It comes with a 32GB TF card and supports expansion up to 256GB.

The package contains:

1. Camera (Quantity: 1)

2. USB data cable (Quantity: 1)

3. 1.25″ extension tube (Quantity: 1)

4. CS-C adapter ring (Quantity: 1)

5. TF card (Quantity: 1)

6. Dust-free cloth (Quantity: 1)

7. Dust cover (Quantity: 1)

8. User manual (Quantity: 1)

For iOS systems: Enter the app store to search SvbonyAstro and click download. Install it according to default steps.

For Android/Harmony OS systems: Enter the app store to search SvbonyAstro and click download. Install it according to default steps.

After taking out the device, connecting the accessories, removing the lens cover, installing the TF card, and fixing the telescope or other device correctly:

1. Long press the power button to turn on the device.

2. Open the installed App and enter the main interface.

3. Click “Connect” to enter the Wi-Fi selection list.

4. Choose SC311_XXXXXX (X indicates a different serial number for each device).

5. Enter the password “12345678” and Click “Enter”.

6. When it displays SC311_XXXXXX in the connected Wifi list (There may display “no Internet access” which is normal), the device connects successfully.

1. Press and hold the power button to turn on the device.

2. Open the installed app on your iPhone. On the app’s main interface, tap on “Connect” to access the permission settings.

3. Tap the back arrow in the top left corner to enter the Wi-Fi selection list.

4. Select “SC311_XXXXXX” (X represents the unique serial number of each device) in the Wi-Fi list.

5. When prompted, enter the password “12345678” and click “Enter”.

6. Once your iPhone shows that it is connected to the SC311_XXXXXX network (it may display “no Internet access” which is normal), it means that the device has been successfully connected.

1. Battery prompt

2. TF card prompt

3. HDR

4. White balance

5. Contrast

6. Saturation

7. Sharpening

8. Brightness

9. Automatic adjustment

10. Plan photo

11. Shooting auxiliary

12. Setting

13. Exposure

14. Gain

15. Video

16. Photo

17. Plan photo (indicator)

18. Local album

1. Local album: View captured video or photo.

2. Enter: Enter the APP operation interface.

3. Connect: Choose WIFI internet setting.

4. Software information: Software version.

The parameter settings menu allows you to adjust or view:

1. Recording quality (e.g., 1080P30)

2. Video segmentation duration (e.g., 10MIN)

3. Wi-Fi Name

4. Wi-Fi password

5. Firmware version

6. Memory card space

7. Format

8. Restore factory settings

1. If you are using a purchased TF card with this product for the first time, please enter the settings option to format the TF card firstly (The TF card provided with this product has been formatted before leaving the factory) to prepare for later video shooting or photo storage.

2. Please allow the APP to access the local photo album on your phone. The program will automatically create a new “SvbonyAstro” photo album in your local photo album to store the images you downloaded from the device photo album to the local photo album on your phone.

3. If the image is not clear, please adjust the focus of the external device until the image is clear.

4. If the exposure time exceeds 100ms for video shooting, it is recommended that the video shooting time be more than 10 minutes. If the time is too short, it may not be stored.

5. There will be a certain delay when adjusting different exposure times. Please wait for the last exposure time to complete, or switch and refresh again.

1. Take out the equipment, connect the accessories, remove the lens cover, install the TF card, and connect your telescope or other external equipment.

2. Use the supplied data cable to connect the Type-C end to the device and the USB end to the PC.

3. Open the UVC software on the PC (Sharpcap software can be selected), select “UVC Camera” to enter the image interface.

Note: During use in WIFI mode, after switching to UVC mode, the device will automatically default to UVC mode. If you want to return to WIFI mode, you need to turn off UVC mode and reconnect the device to return to WIFI mode.

1. Press the scheduled photo button on the main interface to switch to scheduled photo mode.

2. Click the icon in the upper right corner of the interface to select the number of planned photos (50, 100, 200 optional).

3. Click the icon to select the time interval for each photo taken (1s, 3s, 5s, 10s optional).

4. After making the above selections, return to the main interface and press the photo button. The device will automatically take photos at fixed intervals according to the selected time and number of photos until the selected number of photos is taken.

5. Export the captured pictures and use video synthesis software to create time-lapse videos.

The Svbony SC311 camera comes with an optical protection window-UV/IR CUT glass, which could protect the sensor from dust and humidity. And the inside of the image sensor is dry and sealed.

We don’t recommend the customer to disassemble the camera and clean it. Because disassembling the camera may lead the sensor to get wet, or it may cause more dust to come in. If you need clean the protection window, it is best to do it during the daytime.

The Suggested way to clean them is to try to blow them away with a manual air pump.

If harmful interference to radio or television reception occurs (which can be determined by turning the equipment off and on), the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

1. In the event of a battery leaking, do not allow the liquid to come into contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice immediately.

2. Since batteries are sensitive to high temperatures when storing them, keep them in a cool and dry place. The recommended temperature should be between +10 °C and +25°C and never exceed +30°C.

3. Batteries should not be stored next to radiators or boilers nor in direct sunlight.

4. Extremes of humidity (below 35% and above 95% relative humidity for sustained periods) should be avoided since they are detrimental to both batteries and packing.

5. Batteries shall be charged at 10°C~40°C environment temperature specified. If the environment temperature is lower than 0°C, the charge shall be prohibited.

6. Rechargeable batteries are only to be charged by adults or by children at least 8 years old under adult supervision.

7. The power delivered by the charger must be between min 5Watts and max 10 Watts required by the radio equipment in order to achieve the maximum charging speed.