Free English LG 60LN5400 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD LG 60LN5400 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
How should I clean the screen and cabinet of the LG 60LN5400?
When cleaning the LG 60LN5400, first unplug the power cord and wipe gently with a soft cloth to prevent scratching. Do not spray water or other liquids directly on the TV as electric shock may occur. Do not clean with chemicals such as alcohol, thinners, or benzine.
To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild detergent. Then wipe immediately with a dry cloth.
What are the recommended dimensions for HDMI cables and USB devices used with the LG 60LN5400?
For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39 inches) thick and 18 mm (0.7 inches) width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV’s USB port.
How do I use the ferrite core supplied with the LG 60LN5400?
Use the ferrite core to reduce electromagnetic interference in the cable. Wind the component cable on the ferrite core once. Place the ferrite core close to the TV.
What are the steps to attach the stand to the LG 60LN5400?
1. When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.
2. Attach the Stand Body to the TV using 3 screws (Size: P5 x 25).
3. Attach the Stand Base to the Stand Body using 4 screws (Size: M4 x 14).
4. Make sure that the screws are fastened tightly. If they are not fastened securely enough, the TV may tilt forward after being installed. Do not tighten the screws with too much force; otherwise, they may be damaged and come loose later.
How do I secure the LG 60LN5400 to a table?
Attach the TV to a table to prevent it from tilting forward, damage, and potential injury. Mount the TV on a table, and then insert and tighten the supplied screw on the rear of the stand.
Note: To prevent the TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the TV may cause injury.
What are the wall mount specifications for the LG 60LN5400?
The LG 60LN5400 supports the VESA standard. Detailed specifications are below:
| VESA (A x B) | 400 x 400 |
| Standard screw | M6 |
| Number of screws | 4 |
| Wall mount bracket (optional) | LSW430B |
How can I prevent “Image burn” or “Burn-in” on the LG 60LN5400 screen?
If a fixed image displays on the TV screen for a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is “image burn” or “burn-in” and not covered by the warranty.
If the aspect ratio of the TV is set to 4:3 for a long period of time, image burn may occur on the letterboxed area of the screen.
Avoid displaying a fixed image on the TV screen for a long period of time (2 or more hours for LCD) to prevent image burn.
How do I connect a mobile phone to the LG 60LN5400 using MHL?
Mobile High-definition Link (MHL) allows you to view the phone screen on the TV. Follow these instructions:
1. Connect the mobile phone to the HDMI IN 2 (MHL) port using an MHL cable.
2. This only works with MHL-enabled phones. An MHL-supported cable is needed.
3. Remove the MHL cable from the TV when the MHL function is disabled or your mobile device is fully charged in standby mode.
4. With some MHL-supporting mobile phones, you can use the TV remote to control the phone.
How do I turn on the LG 60LN5400 for the first time and access Initial Settings?
1. Connect the power cord to a power outlet.
2. In standby mode, press the power button on the remote control to turn the TV on.
3. The Initial setting screen appears when you turn the TV on for the first time. Follow the on-screen instructions to customize your TV settings:
– Language: Selects a language to display.
– Mode Setting: Selects “Home Use” for the home environment. (Note: “Store Demo” is suitable for retail environments. If “Store Demo” is selected, customized settings will switch back to default after 5 minutes).
– Power Indicator: Sets the Standby light.
– Time Zone: Selects the time zone and daylight saving.
– Auto Tuning: Scans and saves available channels automatically.
4. When the basic settings are complete, press the OK button.
How do I access the User Guide on the LG 60LN5400?
The User Guide allows you to access detailed TV information. To access it:
1. Press SETTINGS to access the main menus.
2. Press the RED button to access the Customer Support menu.
3. Press the Navigation buttons to scroll to User Guide and press OK.
What are the supported PC resolutions for the LG 60LN5400 via HDMI?
The supported HDMI (PC) modes are:
| Resolution | Horizontal Frequency (kHz) | Vertical Frequency (Hz) |
|---|---|---|
| 640 x 350 | 31.468 | 70.09 |
| 720 x 400 | 31.469 | 70.08 |
| 640 x 480 | 31.469 | 59.94 |
| 800 x 600 | 37.879 | 60.31 |
| 1024 x 768 | 48.363 | 60.00 |
| 1360 x 768 | 47.712 | 60.015 |
| 1152 x 864 | 54.348 | 60.053 |
| 1280 x 1024 | 63.981 | 60.02 |
| 1920 x 1080 | 67.50 | 60.00 |
How can I troubleshoot common issues with the LG 60LN5400?
Refer to the following table for troubleshooting common problems:
| Problem | Solution |
|---|---|
| Cannot control the TV with the remote control. |
Check the remote control sensor on the product and try again. Check if there is any obstacle between the product and the remote control. Check if the batteries are still working and properly installed. |
| No image display and no sound is produced. |
Check if the product is turned on. Check if the power cord is connected to a wall outlet. Check if there is a problem in the wall outlet by connecting other products. |
| The TV turns off suddenly. |
Check the power control settings. The power supply may be interrupted. Check if the Auto sleep feature is activated in the Time settings. If there is no signal while the TV is on, the TV will turn off automatically after 15 minutes of inactivity. |
How do I connect an external control device to the LG 60LN5400?
To control the product’s functions externally using a computer or A/V control system:
Connect the USB to Serial converter/RS-232C input jack to the external control device. LG TV supports PL2303 chip-based USB to serial converters (Vendor ID: 0x0557, Product ID: 0x2008). The cable is not provided and must be purchased separately.
Connect the USB end to the USB IN port on the TV and the other end to the computer.
What are the dimensions and weight of the LG 60LN5400?
| Dimensions (W x H x D) With stand | 1,359 x 852 x 297 (mm) / 53.5 x 33.5 x 11.6 (inches) |
| Dimensions (W x H x D) Without stand | 1,359 x 799 x 67.2 (mm) / 53.5 x 31.4 x 2.6 (inches) |
| Weight With stand | 26.3 kg (57.9 lbs) |
| Weight Without stand | 24.2 kg (53.3 lbs) |
CLICK HERE TO DOWNLOAD LG 60LN5400 (01) PDF DOCUMENT