Post questions, comments, reviews or errors in the comment box below.

Your File is Ready … Download PDF


PDF Content Summary: Driver & Manual Download : Introduction DisplayPort to Dual HDMI Graphics Splitter Quick Installation Guide Second Edition Features Copyright Copyright© 2011 SUNIX Co., Ltd. All Rights Reserved. No part of this publication may be reproduced, transcribed, stored in a retrieval system, translated into any language, or transmitted in any form or by any means, photocopying, manual, or otherwise, without prior written permission from SUNIX Co., Ltd. Disclaimer All above specifications are subject to change without notice. SUNIX Co., Ltd. Shall not be liable for any incidental or consequential damages resulting from the performance or use of this equipment. SUNIX Co., Ltd. makes no representations or warranties regarding the contents of this manual. Information in this manual has been carefully checked for reliability; however, no guarantee is given as to the correctness of this content. In the interest of continued product improvement, this company reserves the right to revise the manual or include change in the specifications of the product described within it at any time without notice and without obligation to notify any person of such revision or changes. The information contained in this manual is provided for general use by the customers. Trademarks SUNIX is a registered trademark of SUNIX Co., Ltd. Other registered marks used herein are for identification purposes only and may be trademarks of their respective owners. Please visit SUNIX website by searching keyword “DPH2001” for detail information. SUNIX DPH2001 DisplayPort to Dual HDMI graphics splitter is an innovative, external multi-display adapter that allows end users to enjoy multiple monitors from a single digital DisplayPort source for each application, such as gaming, graphics design or spreadsheet analysis. Users can choose to dedicate each monitor to a separate application. SUNIX DisplayPort to Dual HDMI graphics splitter lets you combine two HDMI monitors as one display, at a maximum resolution of 3840x1200, to make the ultimate wide screen desktop. This graphics expansion module can also clone your primary display and function as a 2 Port HDMI Video Splitter. Compatible with a DisplayPort video card, SUNIX DisplayPort to Dual HDMI graphics splitter dongle requires no software installation for multi-display applications, plug-n-play, simplifying configuration and saving time. It works for standard Microsoft Windows PC with DisplayPort connectivity. • Ideal for multi-display and TV-Wall application. • Works with any desktop or notebook computer which has DisplayPort output connectivity. • Enable 2 HDMI monitors working simultaneously with video mirror or extension mode. • Fully HD compatible and provides full display performance with virtually zero latency and no display application limitations. • Compatible with DisplayPort v1.2 / 1.1a, HDMITM v1.4b, VESA DDM, and EDID v1.4 Standards. • Supports exceptional Secured Content Protection with HDCP 1.3 for digital content. • DisplayPort link rates of 5.4Gbps (HBR2), 2.7Gbps (HBR) and 1.62Gbps (RBR). • Supports kinds of HDMI video dongles converting to DVI or VGA output connectivity. • Driver Free, Plug & Play without configuration. • Certified by CE, FCC, VCCI, BSMI, C-Tick, and RoHS. Specification Model Description Interface DPH2001 DisplayPort to Dual HDMI Graphics Splitter DisplayPortTM v1.2 / 1.1a, HDMITM v1.4bVideo Input DisplayPortTM v1.2 / 1.1a Female Connectivity (Left Side) Reserve USB Micro B +5VDC@500mA Power Input (Right Side) Video Output Connectivity HDMITM v1.4b Female x 2 Audio Output Digital Audio output over DisplayPort by HDMI output Connectivity (Audio channel selected over Windows Audio control panel) Two Monitors Computer Settings Each Monitor 3840 x 1200 1920 x 1200 3840 x 1080 1920 x 1080 3360 x 1050 1680 x 1050 3200 x 1200 1600 x 1200 2800 x 1050 1400 x 1050 Resolution Support 2880 x 900 1440 x 900 2560 x 1024 1280 x 1024 2048 x 768 1024 x 768 1600 x 600 800 x 600 1280 x 480 640 x 800 * Notes Power Consumption 2.1W Case Material ABS Weight 65g ± 2g (2.3oz) Dimensions 92.5x60.5x22.0mm EUR: CE, EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3 Regulatory Approvals US: FCC Part 15 Class B TAIWAN: BSMI: CNS13438 AS/NZS: C-Tick: CISPR22 JAPAN: VCCI O.S. Support Windows XP/2003/Vista/7/2008/8/8.1 (32/64-bit) Operation temperature: 0 °C ä 40 °C (32-104°F) Environment Operation humidity: < 85% non-condensing Storage temperature: -10 °C ä 85 °C (14~176°F) Note: * Based on a Vertical Refresh Rate of 60Hz. * GPU dependent. EDID (Extended Display Identification Data) maximum resolution capabilities may differ from GPU capability. Package Checklist Check if the following items are attached and in good condition while receving this package. Contact your retailer if any item is damaged or missing. 1. DisplayPort to Dual HDMI Graphics Splitter x 1 2. Quick Installation Guide 3. DisplayPort Male to DisplayPort Male cable 200mm (8.0 ft.) x 1 (Optional) 4. Mini-DisplayPort Male to DisplayPort Male cable 100mm (4.0 ft.) x 1 (Optional) System Requirements 1. Intel PC base computer with at least one available DisplayPort. 2. Monitors with HDMI connections. Hardware Guide 1 USB Micro B type external power Input: Connecting to external power source. When you are not using enclosed cable or graphics output source power is not enough, be sure to connect external +5VDC power from AC/DC Adapter or power cable from PC USB port. 2 DisplayPort Input : Connecting to PC graphics source. 3 HDMI graphics output port 1: Connecting with HDMI enable monitor. 4 HDMI graphics output port 1 LED: To indicate linking status with HDMI monitor.* 5 HDMI graphics output port 2: Connecting with HDMI enable monitor. 6 HDMI graphics output port 2 LED: To indicate linking status with HDMI monitor.* Note: The LED indicator: * GOOD: The Green indicator LED = ON; working normally. * BAD: The Green indicator LED = DIM; the DisplayPort power output is insufficient on this port. * BAD: The Green indicator LED = FLASH; the graphics card is not working properly. Installation Follow the steps to install DisplayPort graphics splitter. It is recommended that to use the same size, type and resolution monitors for connecting. Same type monitor means the monitors have the same native resolution and display refresh rate. Mirror Mode Step 1: Connecting graphics splitter, DisplayPort input with cable to graphics source, such as Desktop or Notebook PC DisplayPort graphics output connector. Step 2: Connecting graphics splitter HDMI output to monitor. Maximum connection: 2 different types of HDMI monitors. Step 3: Power on PC and monitors. Select monitors’ to correct input source. Step 4: Changing the display to clone mode, change the output display resolution on your computer. After installation, you will see the same image on all monitors (clone mode) or a single image spread across multiple monitors. To change the display setting, simply change the graphic card output resolution via the Display Properties page. DisplayPort cable HDMI Monitor PC Extend Mode HDMI Monitor DisplayPort cable PC Display Setting User can set mirror or extension mode via Windows display resolution setting. Right click Question 1: Question 5: your mouse on the desktop and select “scree resolution”. Here is the example when using two I am not able to set these modes; Multi-Stream Transport (MST) or Single-Stream How many monitors can I connect to the DisplayPort to Dual HDMI graphics splitter and 1920 x 1080 Full HD standard displays with single DisplayPort to Dual HDMI graphics splitter. Transport (SST) mode. what are the maximum supported resolutions? Display Screen Resolution Solution: Solution: Change the appearance of your display 1. Please check if your DisplayPort output port is DisplayPort 1.1 or 1.2 specifications. 1. Basically, it will depend on your graphics card maximum bandwidth display frame rate and Multi-Stream Transport mode only available on DisplayPort 1.2 specification or later. supported resolutions. For example, high-end AMD/ATI graphics card can support up to 2. Please contact your graphics card manufacturer for more details. six (6) monitors with maximum resolution at 5760 x 2160 with the use of two (2) Screen resolution Question 2: There is no audio output through the DisplayPort graphics splitter. DisplayPort graphics splitters (with DisplayPort 1.2 specification source). 2. Please contact your graphics card manufacturer for more details information on such limitation and supported specifications. Solution: 3. For Intel Haswell chipset graphics platform, please see below supported information: 1. The DisplayPort graphics splitter supports digital audio stream over standard DisplayPort port. Please select audio output at Control Panel > Sound > Playback setting. 2. Digital audio stream will only accept one (1) monitor for audio output at a time. Note: Under DisplayPort 1.1 SST mode environment, when display resolution is greater than 1920x1080(1920x1200) pixels, DisplayPort graphics splitter runs “Extension” mode, such as 3840x1080 (3840x1200) pixels. When display resolution is equal or lesser than 1920x1080 pixels (1920x1200), DisplayPort graphics splitter runs “Mirror” mode. Change the appearance of your display Detect Identify Display: 1. SUNIX DPH2001 Resolution: 1920 x 1080 (recommended) Orientation: Landscape DisplayPort 1.2 MST Mode: Question 3: There is no display on the monitor, and the green indicator LED is OFF when using video dongle adapter, such as HDMI-to-VGA adapter, with the DisplayPort to Dual HDMI graphics splitter. 1 2 Solution: Question 6: The monitor screen image/display is garbled or unstable on one of the monitor (such as 1. Please use the enclosed cable for the connection, and make sure all connections are blank screen, rolling or overlapping screen images). secured. The cable used for the connection must meet DisplayPort standard specification. 2. The graphics card port might not able to provide sufficient power to the DisplayPort splitter. You will need to provide external power to the DisplayPort if this is the case. Please connect Solution: 1. These monitors may be different brands and models, and have different supported resolution and refresh rate modes under the HDMI v1.3 standard interface. a +5VDC power source. You may use a standalone AC/DC power adapter or simply using 2. Please try to set all monitors with the same resolution, or uses identical brand/model monitors. a standard USB Type-A to Micro-USB Type-B cable connection to the computer or power adapter. DisplayPort 1.2 MST Mode with Collage Display Mode: Question 4: Question 7: There is no display when connecting the DisplayPort to Dual HDMI graphics splitter to my monitors. The computer desktop display does not stretched across to multiple monitors. Solution: 1. There may be other display outputs on your computer, and its display setting has set to “Clone Mode”. In clone mode, the highest resolution is limited by the maximum capability of the primary display. 2. Please change the port that you have connected the DisplayPort to Dual HDMI graphics Display: 1l2 Multiple Monitors splitter to, and make sure the DisplayPort output is active. 3. Please set the DisplayPort to Dual HDMI graphics splitter as “Primary Display”. Resolution: 3840 x 1080 If problems still persist, please contact the graphics card manufacturer for more details Orientation: Landscape on how to change and set primary display, and possible with an updated software drivers. Question 8: Why there are no display on my monitors that connected to the unit? Does the unit require any power to work? Solution: 1. Generally, when connecting to one to two monitors, the power supplied from the computer Display Screen Resolution should be enough to power the unit and to have a stable connection between the monitors and this unit. 2. Sometimes the unit may need more power in order to function properly, such as when connecting to more than two monitors, or when the monitors require too much power then what can be provided from the connection from your PC alone. In this regards, the unit has a reserve power connection. The power connection is for a Micro-B USB port +5VDC cable, such as those to power Android products. P.S. This product requires power to operate. Additional power can be provided to the unit via Micro-B USB port +5VDC connection. Micro-B USB cable is NOT provided with the unit. 1. Display: SUNIX DPH2001 Orientation: Landscape Resolution: 1920 x 1080 (recommended) Display Screen Resolution Change the appearance of your display Display Screen Resolution Change the appearance of your display 1. Display: SUNIX DPH2001 Orientation: Landscape Resolution: 3840 x 1080 1 2 Detect Identify Detect Identify Detect Identify Troubleshooting Solution: 1. Please use the enclosed cable for the connection. If connection has been established, the green indicator LED light should be ON. If there is still no display on the monitor, and the green LED light is dark. Please make sure the cable that you are using meet DisplayPort standard specification. 2. If the green indicator LED light is dim, there might be insufficient power from the DisplayPort source. Please connect external +5VDC power from AC/DC Adapter or PC USB port over reserved USB Micro B connector. 3. If the green indicator LED flashes, the unit is not fully functioning. Please “Restart” the computer, and “Un-Plug” then “Re-Plug” the connection with this DisplayPort splitter. If problems still persist, please contact the graphics card manufacturer for an updated software drivers for this graphics card. 4. There might be multiple display output ports on your computer such as VGA, DVI, HDMI or DisplayPort, please make sure you have set the primary output (at the BIOS) to DisplayPort for our graphics splitter. Display Resolution (60 frames per second refresh rate) Maximum Number of Monitors based on DisplayPort 1.2 Bandwidth 1680 x 1050 (WSXGA) 1920 x 1080 (1080p) or 1920 x 1200 2560 x 1600 (WQXGA) 3840 x 2160 (UltraHD, 4K) or 4096 x 2160 (4K x 2K) 5421 Regulatory Compliance FCC Conditions This equipment has been tested and found to comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference 2. This device must accept any interference received. Including interference that may cause undesired operation. Important! Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment. Use an approved phone set. CEThis equipment is in compliance with the requirements of the following regulations: EN 55022: CLASS B WEEE Information For EU (European Union) member users: According to the WEEE (Waste electrical and electronic equipment) Directive, do not dispose of this product as household waste or commercial waste. Waste electrical and electronic equipment should be appropriately collected and recycled as required by practices established for your country. For information on recycling of this product, please contact your local authorities, your household waste disposal service or the shop where you purchased the product. Contact Information Customer satisfaction is our number one concern, and to ensure that customers receive the full benefit of our products, SUNIX services has been set up to provide technical support, driver updates, product information, and user’s manual updates. Copyright© by SUNIX Co., Ltd. All brand names and trademarks are the rigistered property of their respective owners. E-mail for technical support: Website for product information: Te l : +886-2-8913-1987 Fax: +886-2-8913-1986 Made in China 771-DPH2001Q1-S01







Leave a Reply