Free English STARTECH NOTECONS02 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD STARTECH NOTECONS02 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What is included in the packaging for the STARTECH NOTECONS02?
The packaging contents include:
1 x USB Crash Cart Adapter
1 x USB A to Mini-B cable
1 x Driver and Software USB flash drive
Do I need to install software on the server to use the STARTECH NOTECONS02?
No changes are needed on the server(s) being controlled. You must install the provided software on the laptop to be able to use the USB Crash Cart Adapter.
The USB Crash Cart Adapter can be connected or disconnected any time you wish. The software does not need to be started first, nor do you need to shut it down before unplugging the USB Crash Cart Adapter.
How do I install the STARTECH NOTECONS02 software on Windows?
Before installing the software on Windows, please disconnect the USB Crash Cart Adapter and cancel any dialog windows regarding “Add new hardware”. These windows can interfere with the installation process.
1. Insert the provided USB flash drive and run the setup.exe installation program.
2. Proceed through the installation prompts to complete the installation.
3. Connect the USB Crash Cart Adapter to a free USB port on the notebook using the supplied USB mini-B to A cable. The other connections to a server are not needed at this point.
4. A message should pop-up entitled Found New Hardware.
5. Windows should find the device driver files and install them automatically. This is a one-time step.
6. The product is ready to be used now, and the main application may be launched now. There is no need to reboot.
How do I install the STARTECH NOTECONS02 software on Mac OS X?
1. Insert the provided USB flash drive into the computer.
2. Double-click on the MacOSX-install.dmg file that you find on the media.
3. After a short delay to verify the disk image, a finder window will open showing the application and a link to /Applications. Drag the main application onto the Applications link.
4. The application is now installed and ready for use: Find it in /Applications and double click on it to start.
5. If you would like to add this application to the Dock, you can drag and drop it from /Applications onto the Dock.
6. Connect the USB Crash Cart Adapter to a free USB port on the notebook using the supplied USB mini-B to A cable.
How do I perform the hardware installation for the STARTECH NOTECONS02?
Once the drivers and software for the USB Crash Cart Adapter are installed on the notebook computer, it can be plugged into the server.
Connect the attached DE-15 VGA cable and the USB type A cable into the desired server. For DVI-I (analog) computer systems, please use a DVI to VGA adapter (StarTech.com ID: DVIVGAMF).
CLICK HERE TO DOWNLOAD STARTECH NOTECONS02 (01) PDF DOCUMENT