Free English SONY SRS-A35 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.


CLICK HERE TO DOWNLOAD SONY SRS-A35 (01) PDF DOCUMENT

If this is not the document you want for this product, click here to see if we have any other documents for this product.

How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.

How do I connect the SONY SRS-A35 to source equipment?

Connect the left speaker to the source equipment.

When the system is connected to a monaural jack of a radio, etc., the sound may only come through the left speaker. In such a case, use the optional Sony plug adaptor PC-236HG. The sound will come through both speakers.

To connect to a stereo phone-type headphones jack, use the optional RK-G138HG connecting cord.


How do I operate the SONY SRS-A35 using the built-in amplifier?

1. Press the POWER switch (ON). The POWER indicator lights up.

2. Adjust the VOLUME control.

Turn off the MEGA BASS (Walkman, Discman, etc.) function as it may cause sound distortion.

After listening, press the POWER switch (OFF/DIRECT). The POWER indicator goes off.


Can I use the SONY SRS-A35 without the built-in amplifier?

Yes. Set the POWER switch (OFF/DIRECT). In this case, the VOLUME control does not operate. Adjust the volume with the connected equipment.


What are the power source options for the SONY SRS-A35?

The system operates on 9 V DC. For AC operation, use only the supplied AC power adaptor. Do not use any other AC power adaptor.

When the AC power adaptor is connected to the system, internal batteries are automatically disconnected.

The system can also be powered by batteries (six R6/size AA batteries in the left speaker only).


When and how should I replace the batteries in the SONY SRS-A35?

When the batteries are weak, the POWER indicator will start flickering and become faint, or the playback sound will be distorted or unstable. In such a case, replace all the batteries with new ones.

If the system is not to be used for a long period of time or is to be operated extensively on AC power, remove the batteries to avoid damage caused by battery leakage and corrosion.


What should I do if the TV picture or monitor display becomes magnetically distorted near the SONY SRS-A35?

Although the SONY SRS-A35 is magnetically shielded, there may be cases that the picture on some TV sets/personal computer sets may become magnetically distorted.

In such a case, turn off the power of the TV set/personal computer set once, and after 15 to 30 minutes turn it on again. For the personal computer set, take the appropriate measures such as data storage before turning it off.

When there seems to be no improvement, locate the system further away from the TV set/personal computer set. Furthermore, be sure not to place objects in which magnets are attached or used near the TV set/personal computer set, such as audio racks, TV stands, toys etc. These may cause magnetic distortion to the picture due to their interaction with the system.


What are the safety precautions for using the SONY SRS-A35?

To prevent fire or shock hazard, do not expose the unit to rain or moisture.

To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

After operating the system with the AC power adaptor, disconnect the AC power adaptor from the wall outlet if the system is not to be used for an extended period of time. The POWER switch on the left speaker does not turn the AC power adaptor off.

Do not leave the system in a location near heat sources, or in a place subject to direct sunlight, excessive dust, moisture, rain or mechanical shock.

Should any solid object or liquid fall into the system, remove the batteries and have the system checked by qualified personnel before operating it any further.

Do not use alcohol, benzine, or thinner to clean the cabinet.

Although this system is magnetically shielded, do not leave recorded tapes, watches, personal credit cards or floppy disks using magnetic coding in front of the system for an extended period of time.


What are the technical specifications of the SONY SRS-A35?

Amplifier section
Power output 3 W + 3 W using with the supplied AC power adaptor
Input impedance 4.7 kilohms (at 1 kHz)
Speaker section
System Full-range, bass reflex type
Speaker unit Full-range (magnetically shielded): 57 mm (2 1/4 in.)
Nominal impedance 8 ohms (OFF/DIRECT)
Rated input power 3 W (OFF/DIRECT)
General
Power requirement DC 9 V, six R6 (size AA) batteries (left speaker only)
Input cord Left: stereo miniplug (1.0 m)
Right: monaural miniplug (1.0 m)
Battery life (at 5 mW + 5 mW output) Approx. 7 hours with Sony batteries R6P(SR)
Approx. 24 hours with Sony alkaline batteries LR6 (SG)
Dimensions Approx. 95 × 185 × 125 mm (w/h/d) (3 3/4 × 7 3/8 × 5 in.)
Mass Left speaker: Approx. 440 g (16.0 oz.)
Right speaker: Approx. 360 g (13 oz.) not incl. batteries
Supplied accessory AC power adaptor (1)
NO IMAGE CONTENT AT THIS TIME. PLEASE CHECK BACK LATER

CLICK HERE TO DOWNLOAD SONY SRS-A35 (01) PDF DOCUMENT


Leave comments, questions, reviews, tips, tricks, hacks or page errors below. Account not required.