SONY PLAYSTATION VR2 CFI-ZVR1 (02) PDF Document

Before using the SONY PLAYSTATION VR2 CFI-ZVR1, you must first carefully read the Health and Safety information, Precautions, and any manuals for compatible hardware. Retain these instructions for future reference. Parents or guardians of children should read this manual for safe use.

You should stop use and disconnect cables immediately if the SONY PLAYSTATION VR2 CFI-ZVR1 functions in an abnormal manner, produces unusual sounds or smells, or becomes too hot to touch.

Yes, the SONY PLAYSTATION VR2 CFI-ZVR1 is not for use by children under age 12.

If you have an epileptic condition or have had seizures, you must consult your doctor prior to using the SONY PLAYSTATION VR2 CFI-ZVR1.

You should DISCONTINUE USE IMMEDIATELY and consult your doctor if you experience any of the following health problems or symptoms while using the SONY PLAYSTATION VR2 CFI-ZVR1:

• Eye soreness, altered vision, migraine, muscle twitching, convulsion or other involuntary movements, blackout, loss of awareness, confusion, or disorientation.

• Headache, dizziness, nausea, fatigue, symptoms similar to motion sickness, or discomfort or pain in any body part such as eyes, ears, hands, arms, or feet. If the condition persists, seek medical attention.

• If you or your child experience dizziness, altered vision, eye or muscle twitches, loss of awareness, disorientation, seizures, or any involuntary movement or convulsion. RESUME GAMEPLAY ONLY ON APPROVAL OF YOUR DOCTOR.

Avoid prolonged continuous use of the SONY PLAYSTATION VR2 CFI-ZVR1. Generally, it is recommended that you take 15-minute breaks for every hour of play. The length and frequency of necessary breaks may vary from person to person, so please take breaks that are long enough to allow any feelings of discomfort to subside.

The SONY PLAYSTATION VR2 CFI-ZVR1 products contain magnets which may interfere with pacemakers, defibrillators, programmable shunt valves, or other medical devices. Do not place these products close to such medical devices or persons who use them. Consult your doctor before using these products if you use such medical devices.

To turn the vibration functions on or off for the SONY PLAYSTATION VR2 CFI-ZVR1 headset or controller, go to your PS5 console’s home screen, and then select Settings > Accessories.

It is advised not to use the vibration function of the VR headset or the trigger effect function on the PS VR2 Sense controller if you use certain medical devices or have any ailment or injury that may be affected by vibration.

Permanent hearing loss may occur if the headset or headphones are used at high volume. Set the volume to a safe level. To protect your hearing:

• Limit the amount of time you use the headset or headphones at high volume.

• Avoid raising the volume to block out noisy surroundings.

• Lower the volume if you can’t hear people speaking near you.

If the built-in lithium-ion battery fluid leaks, stop using the product immediately. If the material gets into the eyes, do not rub; immediately flush the eyes with clean water and seek medical attention. If the material comes into contact with the skin or clothes, immediately rinse the affected area with clean water and consult your doctor.

The SONY PLAYSTATION VR2 CFI-ZVR1 headset completely blocks your ability to see your surroundings. To avoid accidents or injury:

• Before wearing the VR headset, ensure there is sufficient clear space around you. Check for people, pets, objects, furniture, or stairs.

• Ensure the floor is stable and even.

• Leave a buffer space between walls, furniture, or anything else you may trip over or collide with when setting up the Play Area.

• Keep young children and pets away from the Play Area during use.

• Do not move around when using content that does not support Roomscale.

• Before playing, check that the VR headset cable is not wrapped around your body or limbs, and check frequently during play.

• Use caution when moving around. Avoid extreme or excessively fast movements of the head, limbs, or body.

Be careful not to hit a person or object when you use the controller. Observe the following when using the SONY PLAYSTATION VR2 CFI-ZVR1 Sense controller:

• Check that there is enough space around you before use.

• Do not use the controllers while the USB cable is connected.

• Pass your hands through the straps attached to each controller and secure them to your wrists before use.

• Hold each controller firmly to prevent it from being thrown. Do not shake the controllers with excessive force.

It is important that you properly wear the SONY PLAYSTATION VR2 CFI-ZVR1 headset during use.

• You can check how to wear the VR headset properly from your PS5 console’s home screen by selecting Settings > Accessories > PlayStation VR2.

• Do not overtighten the headband adjustment dial.

• You can use the VR headset while wearing glasses. When you adjust the position of the scope, be careful not to hit the lenses with your glasses.

• Regularly check the VR headset’s fit to ensure it is being worn properly.

If the SONY PLAYSTATION VR2 CFI-ZVR1 is moved from a cold location to a warm one, moisture may condense inside. If this occurs, the product may not operate properly. In this case, disconnect the VR headset cable from your PS5 console, turn off the controller, and leave them for several hours. If the product still does not operate properly, contact customer support.

Press the (power) button on the VR headset for at least seven seconds to force a shutdown, and then turn on the headset again. If the problem persists, restart the PS5 console.

If the SONY PLAYSTATION VR2 CFI-ZVR1’s internal temperature becomes elevated, a message will be displayed. In this case, turn off the VR headset and leave it unused for a while. Make sure you are not using it in a hot area or with the vents blocked. After the VR headset cools down, move it to a location with good ventilation, and then resume use.

To connect your SONY PLAYSTATION VR2 CFI-ZVR1, connect the VR headset cable to the USB Type-C® port (SuperSpeed USB 10Gbps) on your PlayStation®5 console.

First, turn on your PS5® console by pressing the (power) button.

Then, turn on your SONY PLAYSTATION VR2 CFI-ZVR1 headset by pressing the (power) button on the headset. The power indicator will blink white and then turn solid white.

If your SONY PLAYSTATION VR2 CFI-ZVR1 headset doesn’t turn on, the cable might not be properly connected. While holding the scope adjustment button, slide out the scope and disconnect the cable. Then, reconnect the cable, making sure it’s fully inserted.

1. Make sure you have the necessary accessories for setup.

2. Start by using the DualSense™ wireless controller included with your PS5 console, and follow the instructions displayed on your TV to complete the setup.

1. Press the (PS) button on each of the controllers to turn them on. The status indicator on each controller will turn white. If it doesn’t turn on, charge the controller.

2. Check that you are correctly holding the left (L) and right (R) controllers. Pass your hand through the loop on each strap and pull the strap while rotating your wrist to secure it.

3. Hold the controllers. Remember to remove the USB cable when you play.

Pairing: If it’s your first time using the controllers, you need to pair them with your PS5 console. Turn on your PS5 console, and then in turn connect each of the controllers to your console using the USB cable.

Charging: Connect each of the controllers to your PS5 console using the USB cable while the console is on or in rest mode. During rest mode, the status indicator on each controller slowly blinks white and then turns off when fully charged. To charge in rest mode, go to Settings > System > Power Saving > Features Available in Rest Mode > Supply Power to USB Ports, and select an option other than Off.

Press the (PS) button on the controller to display the control centre of your PS5 console. When you select Accessories > PS VR2 Sense Controller (L) or PS VR2 Sense Controller (R) > Turn Off, the controller and its status indicator will turn off.

If a strap detaches from a SONY PLAYSTATION VR2 CFI-ZVR1 Sense controller, align the raised part of the hook with the strap holder. Then, rotate the strap hook in the direction of the arrow until the strap locks into place.

Hold down the headband release button and pull back the headband to remove the SONY PLAYSTATION VR2 CFI-ZVR1 headset. When the VR headset is removed, the headset screen will turn off automatically.

Press and hold the (power) button on the SONY PLAYSTATION VR2 CFI-ZVR1 headset. The power indicator blinks white and then turns red.

There are three types of postures and movements when playing in VR mode with the SONY PLAYSTATION VR2 CFI-ZVR1, which are VR play styles. When you purchase games or apps, check which VR play style is supported.

You sit in cinematic mode. Play Areas are deactivated in cinematic mode, so you won’t see any boundary lines or messages when you move outside of the area.

The SONY PLAYSTATION VR2 CFI-ZVR1 includes a see-through view that allows you to check your surroundings while wearing the headset. Press the (function) button on the VR headset during gameplay to switch the display. The display also automatically switches to the see-through view in the following cases:

• When you set the Play Area

• When you move outside of the Play Area during gameplay

You can configure your SONY PLAYSTATION VR2 CFI-ZVR1 headset settings, including the Play Area and (function) button assignments. Select your account as a PS VR2 user, then from the PS5 console’s home screen, select Settings > Accessories > PlayStation VR2. These settings are displayed only when the VR headset is on and connected to your PS5 console.

Parents and guardians can restrict usage by children as necessary. From the PS5 console’s home screen, select Settings > Family and Parental Controls and set restrictions for each child.

The stereo headphones are supplied with M (medium) size earpieces attached. If they do not fit your ears, you can replace them with the S (small) or L (large) size earpieces for a better fit. To remove, twist then pull the earpiece off the headphones. Install the new earpieces firmly to help prevent them from accidentally detaching during use.

For your safety, remove the VR headset from your PS5 console and turn off the controller before cleaning.

• Do not apply volatile substances such as insecticide.

• Do not allow rubber or vinyl materials to be in prolonged contact with the product.

• Do not use thinner, benzine, or alcohol. Avoid using wipes, chemically treated cloths, and other products that contain such substances.

VR headset surfaces, head supports, controller surfaces: Wipe with a soft, dry cloth.

Connectors and ports: Wipe with a soft, dry cloth.

Lenses: Wipe only with a soft, dry cloth made specifically for cleaning lenses. Do not use paper products like paper towels. If dirt is stubborn, wipe first with a slightly moistened cloth, then again with a dry cloth. Leaving water droplets or dirt on the lenses may cause deterioration.

1. Remove the light shield: Gently pull and wiggle the base at the right or left end of the light shield, and remove it from the protrusions on the VR headset one by one. Be careful not to use excessive force.

2. Clean the light shield: Clean it with water.

3. Dry the light shield: Wipe off the water with a soft, dry cloth. Before using, air dry the light shield well in a place with good ventilation.

4. Attach the light shield: Insert the 14 protrusions on the VR headset into the holes of the light shield, and push the protrusion on the nose part of the light shield into the groove on the VR headset.

Vents: Remove dust build-up from the vents using a handheld vacuum cleaner or similar product.

Earpieces: Remove the earpieces from the stereo headphones and wash them by hand with a mild detergent. Dry them completely with a soft cloth before reattaching them to the headphones.

The SONY PLAYSTATION VR2 CFI-ZVR1 and its controllers are made of many materials that may be recycled. Follow local regulations when disposing of the products. The relevant electrical product or battery should not be disposed of as general household waste in the EU, UK, Türkiye, or other countries with separate waste collection systems. To ensure correct waste treatment, please dispose of them via an authorised collection facility, in accordance with any applicable laws or requirements.

Always update the system software of your PS5 console and the device software of the VR headset and PS VR2 Sense controller to the latest version.

You can find out about everything your PS5 console can do, including detailed information about your VR system’s functions and how to configure settings, in the User’s Guide. From your PS5 console’s home screen, go to Settings > User’s Guide, Health and Safety, and Other Information > User’s Guide.