SONY CP-F2LS (01) PDF Document

The SONY CP-F2LS has the following parts and functions:

1. Power button: Press to check the remaining battery before use.

2. USB output ports

3. LED indicators

4. Micro USB input port

Follow these steps to charge your SONY CP-F2LS:

1. Connect the supplied USB-micro USB cable to the USB output port of the AC adaptor (sold separately).

2. Connect the other end of the USB-micro USB cable to the micro USB input port of the SONY CP-F2LS.

3. The charging will start. The LED indicator will show the charging status.

The LED indicators on your SONY CP-F2LS show the charging status as follows:

To supply power from your SONY CP-F2LS to another device, follow these steps:

1. Connect your portable device to the USB output port of the SONY CP-F2LS using the appropriate cable for your device (supplied USB-micro USB cable or your own cable).

2. The power supply will start automatically.

3. The LED indicator shows the power supplying status.

The LED indicators on your SONY CP-F2LS show the power supplying condition as follows:

The charging time for the SONY CP-F2LS varies depending on the power source:

Note: These times are based on a power supply of DC 5 V, 1.0 A. Supply time varies depending on battery condition, storage conditions and portable device.

Model: CP-F2LS

Input: DC 5 V, 0.5 A – 1.0 A

Output: DC 5 V, 2.1 A (Max)

Dimensions: 70.4 mm × 130.6 mm × 12.9 mm (2.8 inches × 5.2 inches × 0.6 inches) (w/h/d)

Weight: Approx. 198 g (7.0 oz)

Operating temperature: 0 °C – 35 °C (32 °F – 95 °F)

The built-in battery is a Lithium-ion polymer battery with a voltage of 3.7 V and a capacity of 7,000 mAh (2 cells).

If your SONY CP-F2LS is not charging, please check the following:

Ensure that the AC adaptor and USB-micro USB cable are properly connected to the AC outlet and the SONY CP-F2LS.

If your SONY CP-F2LS is not supplying power to your portable device, try the following:

Check that the cable is properly connected to both the SONY CP-F2LS and your portable device.

Also, confirm that the battery of the SONY CP-F2LS has not run out.

No, you cannot charge the SONY CP-F2LS portable power supply and supply power to a portable device simultaneously.

Please keep the following in mind when using your SONY CP-F2LS:

• The number of charges mentioned in the instructions is based on our test results. The number of charges depends on the model of your portable device, and other factors such as its condition, the temperature and usage conditions.

• It is recommended to use the supplied USB-micro USB cable. If you use your own cable, make sure it is compatible with your portable device.

• Check that the portable device has a rated voltage of 5 V. The SONY CP-F2LS is not capable of supplying power to devices that need more than a DC 5 V power supply.

• For safety, it is not possible to charge the SONY CP-F2LS and supply power to a portable device at the same time.

• The SONY CP-F2LS should not be charged from a computer that is in hibernate mode.

• Even if you are not using the SONY CP-F2LS, it is recommended to charge it once every six months to maintain its performance.

• The SONY CP-F2LS may get warm while it is in use or charging. This is not a malfunction.

• Store the SONY CP-F2LS in a location with stable temperature. Do not store in a car, in direct sunlight or other high-temperature locations.

• The battery life of the SONY CP-F2LS may vary depending on the device, usage and conditions. The battery capacity may decrease over time and with use.

To reduce the risk of fire or electric shock, do not expose the SONY CP-F2LS to rain or moisture. Do not open the unit. Refer servicing to qualified personnel only.

Please observe the following cautions when using the SONY CP-F2LS:

• When carrying the SONY CP-F2LS in your bag, do not place it together with metal objects (necklaces, hairpins, etc.). This could cause a short circuit, resulting in heat generation, fire, or burns.

• Be careful not to drop the SONY CP-F2LS or subject it to strong impact, as this may cause a malfunction.

• Do not use the SONY CP-F2LS in locations of extreme temperatures, in direct sunlight, in a car, or near a heater.

• Do not expose the SONY CP-F2LS to water, seawater, juice or moisture.

• Do not disassemble, modify, or repair the SONY CP-F2LS yourself.

• Do not apply a strong force to the surface of the product.

• Do not throw the SONY CP-F2LS into a fire.

• If you find anything unusual, such as a strange odor, heat, discoloration, or deformation, while charging or using the SONY CP-F2LS, stop using it immediately.

• If any liquid leaks from the SONY CP-F2LS, do not touch it with your bare hands.

• Keep the SONY CP-F2LS out of reach of small children.