Free English SMALLRIG BLACK MAMBA 5503 (01) PDF document. Download the PDF, use the online viewer, or browse the FAQs for easy troubleshooting.
CLICK HERE TO DOWNLOAD SMALLRIG BLACK MAMBA 5503 (01) PDF DOCUMENT
If this is not the document you want for this product, click here to see if we have any other documents for this product.
How to use the PDF below:
* Touchscreen: Swipe up/down with-in the PDF to scroll and pinch or spread with two fingers to zoom.
* Mouse: While your mouse is hovering over the PDF, use the mouse wheel to scroll and click on the – / + buttons at the bottom of the PDF to zoom.
What is included in the box for the SMALLRIG BLACK MAMBA 5503?
The SMALLRIG BLACK MAMBA 5503 package contains one cage, one top handle, one cable clamp, and one operating instruction manual.
What are the specifications for the SMALLRIG BLACK MAMBA 5503?
| Product Dimensions | 6.3 x 5.6 x 2.8in (169.3 x 130.0 x 185.5mm) |
| Product Weight | 10.5 x 0.2oz (297.6g x 5.0g) |
| Material(s) | Aluminum Alloy, Silicone |
| Compatibility | Panasonic G9 II / S5 II / S5 IIX / S1R II / S1 II / S1 IIE |
How do I install the cage for the SMALLRIG BLACK MAMBA 5503?
Step 1. Remove the side blocks from the cage.
Step 2. Place the camera into the cage.
Step 3. For Panasonic S1R II / S1 II / S1 IIE, hold the camera’s right side and cage together before inserting the side block. Secure the camera to the cage using the bottom screw with the provided dual-head wrench.
How do I install the cage kit for the SMALLRIG BLACK MAMBA 5503?
After the cage is secured to the camera, align the top handle with the top of the cage and tighten the screw on the top handle to secure it.
How do I install the cable clamp on the SMALLRIG BLACK MAMBA 5503?
The cable clamp can be installed on the side of the cage. Ensure the orientation of the clamp matches your camera model (Panasonic S1R II / S1 II / S1 IIE or Panasonic G9 II / S5 II / S5 IIX) before securing it with the screws.
What are the safety guidelines for the SMALLRIG BLACK MAMBA 5503?
Do not use the product underwater, in extreme temperatures, in corrosive environments, or in areas with excessive dust. Dry metal parts immediately after liquid contact to prevent corrosion.
Do not exceed the maximum weight capacity indicated on the product. Overloading risks structural failure, deformation, or accidental drops.
Clean surfaces with a dry, soft cloth. Avoid chemicals like alcohol or solvents. Ensure dry and ventilated conditions for long-term storage.
Do not modify the product, such as drilling or cutting, as this compromises structural integrity and increases drop risks.
Stop use immediately if you notice deformation, unusual noises, or loose components, and contact support.
CLICK HERE TO DOWNLOAD SMALLRIG BLACK MAMBA 5503 (01) PDF DOCUMENT