SINGTRONIC KA-3000PRO (01) PDF MANUAL

The KA-3000Pro features include:

Professional Digital Echo with separate repeat and delay controls.

3 Mic inputs with individual volume controls and echo on/off switches.

Music master/bass/mid/treble controls.

Mic master/bass/treble controls.

Mic with Individual Bass/mid/Treble controls.

Source/Level output displays.

Sub-woofer output and 1 set of A/V Input/output Jacks.

Remote control.

Digital sound Effect.

Excellent Add-on to any karaoke system.

To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture.

1. Read Instructions: All the safety and operating instructions should be read before the appliance is operated.

2. Retain Instructions: The safety and operating instructions should be retained for future reference.

3. Heed Warnings: All warnings on the appliance and in the operating instructions should be adhered to.

4. Follow Instructions: All operating and use instructions should be followed.

5. Attachments: Do not use attachments not recommended by the product manufacturer as they may cause hazards.

6. Water and Moisture: Do not use this unit near water. For example, near a bathtub or in a wet basement and the like.

7. Carts and Stands: The appliance should be used only with a cart or stand that is recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause an overturn.

8. Ventilation: The appliance should be situated so its location does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation slots.

9. Heat: The appliance should be situated away from heat sources such as radiators, heat registers, or other appliances (including amplifiers) that produce heat.

10. Power Sources: Precautions should be taken so that the grounding or polarization marked on the appliance is not defeated.

11. Power Cord Protection: Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

12. Cleaning: Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners, Use a damp cloth for cleaning.

13. Nonuse Periods: The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time.

14. Object and Liquid Entry: Care should be taken so that objects do not fall and liquids are not spilled into enclosure through openings.

15. Damage Requiring Service: The appliance should be serviced by qualified service personnel when: The power supply cord or plug has been damaged; or Objects have fallen into the appliance; or The appliance has been exposed to rain; or The appliance does not appear to operate normally or exhibits a marked change in performance; or The appliance has been dropped, or the enclosure damaged.

1. To ensure the finest performance, please read this manual carefully, keep it in a safe place for future reference.

2. Install your unit in a cool, dry, clean place – away from windows, heat sources, and too much vibration, dust, moisture or cold. Avoid sources of hum (transformers, motors). To prevent fire or electrical shock, do not expose to rain or water.

3. Do not operate the unit upside-down.

4. Never open the cabinet. If a foreign object drops into the set, contact your dealer.

5. Place the unit in a location with adequate air circulation. Do not interfere with its proper ventilation; this will cause the internal temperature to rise and may result in a failure.

6. Do not use force on switches, knobs or cords. When moving the unit, turn the unit off first. Then gently disconnect the power plug and the cords connecting to other equipment. Never pull the cord itself.

7. Do not attempt to clean the unit with chemical solvents this might damage the finish. Use a clean, dry cloth.

8. This unit consumes a fair amount of power even when the power switch is turned off. We recommend that you unplug the power cord from the wall outlet if the unit is not going to be used for a long time. To disconnect the cord, pull it out by grasping the plug. Never pull the cord itself.

9. The apparatus is not disconnected from the AC power source so long as it is connected to the wall outlet, even if the apparatus itself is turned off. To fully insure that the apparatus is indeed fully void of residual power, leave unit disconnected the AC outlet for at least fifteen seconds.

The Power button is the main power switch to the KA-3000Pro.

The Input button switches between the four available A/V/S-Video channels that can be connected to the KA-3000Pro. Common A/V peripherals include DVD player, AUX player, USB/and HD, HDD, and Air-M.

These lighted displays are visual representations of the KA-3000Pro real-time activity. The POWER and SOURCE displays tell you if the unit is turned on, and which source the KA-3000Pro is recognizing as its current source. The LEFT and RIGHT LEVEL output displays reflect the output levels from the source units (i.e. DVD, AUX, USB, HD, HDD, Air-M). They measure from green [low] to red [high]. When you see the levels reaching the red, that is known as “peaking,” and means you should probably lower the Master Volume or Master Mic levels to avoid distortion and possible damage to speakers.

The MIC MASTER control knob serves as a single output level control for all 3 MIC channels (irrespective of their individual setting). This allows you to increase or decrease MIC output levels with one turn of the knob.

Note: If you desire to adjust the output level of just one Mic channel in particular, it is recommended to use that Mic’s individual output level control instead of the MIC MASTER control because all MIC channels will be adjusted with the intended channel.

The MIC BASS, MID and TREBLE control knobs serve as a MASTER BASS, MID and TREBLE control for all 3 Mic channels. To add more BASS, MID or TREBLE to the Mic channels, simply turn either of the knobs clockwise to increase levels or counter-clockwise to decrease levels.

Note: BASS and TREBLE levels for each of the Mic channels can be adjusted individually.

The DIGITAL ECHO, LO, HI, DELAY and REPEAT knobs control the KA-3000Pro effects processing levels. As with the Mic master, bass and treble controls, the Digital Echo knob controls the overall echo applied to the 3 Mic channels. The DELAY knob controls the interval time between each echo and the REPEAT knob controls the times of the echo. For all 5 effects knobs, turn clockwise to increase and counter-clockwise to decrease.

These knobs (VOL, BAL, ECHO under each MIC input) control the MIC CHANNELS output levels individually. This makes it possible to adjust one Mic channel without affecting the other 2 channels. This can be used when one person or (Mic channel) might be overpowering others in a duo or trio. Turn clockwise to increase output levels, and counter-clockwise to decrease output levels.

The MUSIC MASTER control knob serves as a single output level control for music. This allows you to increase or decrease music output level with one turn of the knob.

The function selector has the following controls:

(1) Usb Play / Pause

(2) Usb Play Stop

(3) Usb Play Back

(4) Usb Play Next

(5) Usb Play Repeat

(6) Sound Effect Mode

(7) Record

(8) Delete Current Play File

You can adjust the subwoofer output using the following controls on the front panel:

Subwoofer output volume adjustment (SUB VOL)

Subwoofer output phase switch

Subwoofer frequency regulation (FREQUENCY)

The set of RCA jacks labeled DVD/AUX/HDD Audio In are for connecting the audio component from an A/V device to the KA-3000Pro. Connect the cable from the AUDIO OUT jacks on the A/V device to these AUDIO IN jacks.

The RCA jack labeled DVD/AUX/HDD Video In is for connecting the video component from an A/V device to the KA-3000Pro for monitors, TFT displays and compatible TV’s. Connect the cable(s) from the VIDEO OUT jack(s) on the source device to this VIDEO IN jack.

The KA-3000Pro has 1 RCA style VIDEO OUT jack and 1 S-VIDEO jack. These jacks are used to supply video to monitors, TFT displays and compatible TV’S. Connect the cable(s) from the VIDEO IN jack(s) on the display device(s) to the VIDEO OUT jack(s) on the amplifier.

The KA-3000Pro has 2 sets of speaker outlets. These outlets are used to supply the music to the speaker. Connect cable from the speaker “+” and “-” terminals on the speaker to the KA-3000Pro’s speaker outlet terminals.