SINBO SHD 7060 (01) PDF Document

The SINBO SHD 7060 is equipped with a DC motor.

Yes, the SINBO SHD 7060 includes a concentrator attachment to help direct airflow during styling.

Yes, the SINBO SHD 7060 features a foldable handle for easier storage and portability.

The SINBO SHD 7060 provides 2 speed settings and 3 heat settings.

Yes, the SINBO SHD 7060 includes a cool shot function to help set your hair style.

The SINBO SHD 7060 is designed with overheating protection to ensure safe operation.

The SINBO SHD 7060 features a hang up hook allowing it to be conveniently hung on a hook.

The SINBO SHD 7060 operates on AC220-240V, 50/60Hz, with a power range of 1600-2000W. It is classified as a Class II appliance.

Before connecting the appliance, check if the voltage indicated on the SINBO SHD 7060 corresponds to your local voltage.

No, you must not use the SINBO SHD 7060 near water or in bathtubs, basins, or other vessels containing water.

When the SINBO SHD 7060 is used in a bathroom, unplug it immediately after use because the proximity of water presents a hazard even when the hairdryer is switched off.

It is advised to install a residual current device (RCD) with a rated residual operating current not exceeding 30mA in the electrical circuit supplying the bathroom for additional protection when using the SINBO SHD 7060.

You should never block the air grilles. If the SINBO SHD 7060 overheats and switches off, you should check the grilles to make sure they are not blocked by fluff, hair, or other debris before switching it on again.

Do not direct the airflow of the SINBO SHD 7060 towards the eyes or other sensitive areas.

No, the SINBO SHD 7060 should not be used with wet hands, immersed in water, or held in running water.

No, the SINBO SHD 7060 should not be used for purposes other than drying and styling human hair.

Do not pull the cord with unnecessary force and do not wrap the cord around the SINBO SHD 7060 unit. You should regularly check the cord for any signs of damage.

Always switch the SINBO SHD 7060 off before putting it down, even if it is only for a moment.

Cleaning the SINBO SHD 7060 after use helps avoid the accumulation of grease and other residues.

Step 1. Put the plug of the SINBO SHD 7060 in the wall socket.

Step 2. Switch the appliance on by selecting the desired setting.

Step 3. Dry your hair by making brushing movements while holding the dryer at a small distance from your hair.

After drying hair, you can use the cool button on the SINBO SHD 7060 to set your style with a continuous flow of cool air.

The switch settings for the SINBO SHD 7060 are as follows:

To connect the concentrator to the SINBO SHD 7060, simply snap it onto the appliance. To disconnect it, pull it off.

The main SINBO SHD 7060 appliance can be cleaned with a dry cloth. You must never rinse the appliance itself with water.

The attachments of the SINBO SHD 7060 can be cleaned with a moist cloth or rinsed under a running tap. Ensure you remove the attachments from the appliance before cleaning them and make sure they are dry before using or storing them.

When not in use, unplug the SINBO SHD 7060. Allow the appliance to cool and store it in a dry location. Use the integrated loop to hang the unit on a hook for easy access.

Wrapping the cord around the SINBO SHD 7060 will cause the cord to wear prematurely and break, which can lead to hazards.

The SINBO SHD 7060 should not be disposed of with other household wastes. To prevent possible harm to the environment or human health, recycle it responsibly to promote the sustainable reuse of material resources through established return and collection systems.

Children should be supervised by a person responsible for their safety to ensure they do not play with the SINBO SHD 7060.

The SINBO SHD 7060 is designed for use in home and similar environments such as personnel kitchen areas in shops, offices, farm houses, or by customers in hotels, motels, and other accommodation units.

The SINBO SHD 7060 can be used by children aged 8 years and older, provided they are supervised or have been given instruction concerning the safe use of the appliance. Keep the SINBO SHD 7060 and its cable out of reach of children under the age of 8.

The SINBO SHD 7060 is designed to be operated with its integrated control system and not with a separate control system or an external timer.

If the SINBO SHD 7060 overheats, it will switch off automatically. Unplug the appliance and let it cool down for several minutes. Check the air grilles for blockages like hair or fluff before attempting to turn it back on.

Class II indicates that the SINBO SHD 7060 is a double-insulated electrical appliance which does not require a safety connection to electrical earth.

The temperature of the SINBO SHD 7060 can be adjusted using the upper switch settings, which offer low, higher, and highest heating options depending on the selected combination.

The airflow speed of the SINBO SHD 7060 is controlled by the “Nether” switch settings, with options for low speed (setting 1) and high speed (setting 2).

Yes, the SINBO SHD 7060 is intended for drying and styling human hair.

The “puniness cool air” setting on the SINBO SHD 7060 is activated by using the cool button only.

Yes, the SINBO SHD 7060 is designed for use in environments such as farm houses.

No, children should be supervised to ensure that they do not play with the SINBO SHD 7060.

The SINBO SHD 7060 is not intended for use by persons with reduced physical, sensory, or mental capabilities unless they have been given supervision or instruction by someone responsible for their safety.

You should clean the SINBO SHD 7060 after every use to avoid the accumulation of grease and other residues.

No, you should always unplug the SINBO SHD 7060 after use, especially if it is being used in a bathroom environment.

When using the SINBO SHD 7060, you should dry your hair by making brushing movements while maintaining a small distance from the hair.

If the supply cord of the SINBO SHD 7060 is damaged, it must be replaced by the manufacturer, its service agent, or a similarly qualified person to avoid hazards.

Yes, the SINBO SHD 7060 is suitable for use in places supplying rooms and breakfast service.

To operate the SINBO SHD 7060 at high speed and the highest heating level, select the “Nether 2 + upper 3” switch setting.

For low speed and higher (medium) heating on the SINBO SHD 7060, select the “Nether 1 + upper 2” switch setting.

The switch setting for high speed and low heating on the SINBO SHD 7060 is “Nether 2 + upper 1”.

Yes, the concentrator attachment of the SINBO SHD 7060 can be rinsed under a running tap, provided it is removed from the dryer first and dried completely before reuse.

Children should not clean or perform maintenance on the SINBO SHD 7060 unless they are older than 8 years old and are supervised.

No, you must never block the air grilles of the SINBO SHD 7060 as this can cause the unit to overheat and potentially cause damage or safety hazards.