Post questions, comments, reviews or errors in the comment box below.

Your File is Ready … Download PDF


PDF Content Summary: PRODUCT COMPLIANCE Product tested and complies to: EN55015:2006/A1:2007 EN61000-3-2:2006 EN61003-3:2008 EN 61547:1995/A1:2000 IEC 61000-4-2:2008 IEC 61000-4-3:2006/A1:2007 IEC 61000-4-4:2004 IEC 61000-4-5:2005 IEC 61000-4-6:2008 IEC 61000-4-8:1993/A1:2000 IEC 61000-4-11:2004 EN 60598-1:2008 EN60598-2-5:1989 EN61347-2-13:2006 AS/NZ 60598-2-1 EN62493:2010 EN62031 IEC/EN 62471 IEC/TR62471-2 and relevant amendments. Product Name LHT 0271 LHT 0272 LHT 0273 LHT 0274 LHT 0275 LHT 0276 Thank you for purchasing this SIMX REFLECT LED Floodlight. This light is suitable for outdoor use and requires a 220 - 240V AC power supply. Please read this manual thoroughly before installation and retain for future reference. MANUFACTURERS EXTENDED WARRANTY This product is guaranteed by SIMX Ltd for 36 MONTHS from the date of purchase against faulty materials or workmanship which affects its designed ability to operate. During this period if the product has a defect of this nature it will be repaired or replaced free of charge by SIMX with the same item, or a similar item, or a similar one of higher specification. ON CONDITION THAT: The buyer returns it to the seller from whom it was bought, freight paid. The product has been bought by the user. ie a receipt/sales invoice is produced as proof of purchase. The product has not been misused or handled carelessly, installed in anyway contrary to the installation instructions, or installed in any unusually exposed or harsh environmental conditions. This guarantee excludes liability for discolouration of paint or plastic, or any user replaceable parts. It also excludes any liability for labour cost claims associated with repair or replacement of the affected product. It does not confer any rights other than those expressly set out above and does not cover any claims for consequential loss or damage. Our Goods come with guarantees that cannot be excluded under the Australian and New Zealand Consumer law. You are entitled to a replacement or refund for a major failure and for compensation for any other TECHNICAL SPECIFICATIONS reasonably foreseeable loss or damage. You are also entitled to have the Goods repaired or replaced if the Goods fail to be of acceptable quality and the failure does not amount to a major failure. Supply Voltage: 220 - 240V AC 50Hz Power Factor: >0.92 Working Temperature: -20°C to +40°C Environmental Protection: IP55 (suitable for indoor Product Weight (KG) Product Dimension (mm) Maximum Projection Area and outdoor use) Protection Class: Class II 0.48KG 98(L) X 122(W) X 111(D)mm 0.67KG 170(L) X 122(W) X 111(D)mm 0.93KG 222(L) X 141(W) X 111(D)mm Distributed by: Simx Limited Ph: +64 9 259 1660 | Technical Support Ph: +64 9 259 1662 Email: | Simx reserves the right to alter technical specifications with prior warning PUB1300 iss01 80mm X 60mm 152mm X 60mm 201mm X 79mm INSTALLATION INSTRUCTIONS Contents: Tools required: X 1 Manual X 1 12W 20W X 1 X 2 X 2 26W Black White X 1 Hand screw Star washer X 2 X 2 INSTRMAUNCUTAIOL NS This product is suitable for use only with a supply voltage of 220-240V AC 50Hz. All electrical work must be carried out in accordance with local and national electrical codes as applicable. We strongly recommend that this light fitting is installed by a registered electrician. Always switch power off prior to installation. A means of mains power isolation must be installed on the circuit for the purpose of safe access for any internal cleaning, recalibration, or maintenance. This light fitting is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Young children should be supervised to ensure that they do not play with the appliance. Any changes or modifications made or attempted to this product, without the prior written approval of the manufacturer, will void any and all stated warranties. U bracket Cable clamp LHT 0271 LHT 0273 Black LHT 0272 LHT 0274 White LHT 0275 Black Tools / Equipment need for installation. LHT 0276 White Screw: Screw peg: Screw: M4x32mm 6x30mm M3x12mm X 2 IMPORTANT Construction: Alloy Housing. Stainless Steel 304 Bracket + Screws, UV Stabilised Polycarbonate 12W 20W 26W Luminous Flux: 500lm 1000lm 1500lm

*** IMPORTANT *** Isolate electrical supply before proceeding with the installation. This light fitting should be installed by a registered electrician Installation Procedure: Supply Mains Isolation Switch NL NL 1. Switch off the power. 2. Marking the screw hole. 3. Drill and push the screw peg into the hole. 4. Fix the U bracket to the wall. φ 6mm Mounting Screws: (M4 x 32mm) x 2 Push Push 5. First, feed the cable through the rubber gasket of the junction box. Pierce the gasket, do not cut or slice it. 6. Attach the strain relief to the device, tighten screws firmly to secure the cable ASSEMBLY AND INSTALLATION INSTRUCTIONS 10. Check device operation. 10. Check device operation. 7. Connect the individual wires to the This light fitting is rated to IP55.This means that it is suitable for use in exterior locations. Please ensure the desired location does not exceed this rating. This product will get warm when in normal use. Can be installed on surfaces of normal flammability e.g. wood, plasterboard, brickwork and other masonry. Do not install on flammable surfaces such as plastics. 230V appropriate terminal then tighten the screw. NEUTRAL BLUE 8. Attach the rear cover to the device. 9. Attach the device to the U bracket with star 9. Attach the device to the U bracket with star LIVE BROWN Ensuring it clicks firmly into place. “Click” washers then tighten the screws on both sides. Hand screw Star washer 1 2







Leave a Reply