SHOKZ OPENCOMM2 (01) PDF MANUAL

SHOKZ OPENCOMM2 (01) PDF SUMMARY:

How do I turn on the headset?

Press and hold the Power/Volume+ Button until the LED indicator flashes blue. Audrey will say, “Welcome to Shokz”.

---

How do I turn off the headset?

Press and hold the Power/Volume+ Button until the LED indicator flashes red. Audrey will say, “Power off”.

---

How do I pair the headset to a mobile device?

1. Start with your headset turned off.
2. Press and hold the Volume+ Button until the LED indicator flashes red and blue alternately.
3. Select “OpenComm2 by Shokz_II” on your device’s Bluetooth settings. Audrey will say, “Connected”.

---

How do I pair the headset to a PC?

1. Start with your headset turned on.
2. Plug the included USB adapter into a USB port on your PC.
3. Connection is established when Audrey says “Connected” or beeps, and the LED indicator on the USB adapter is solid cyan. To play music or take calls on the headset, please ensure the “Loop120 by Shokz” is both identified as the default input and output devices in your operating system’s audio settings.

---

How do I wear the headset?

Slide the headset over your head, bring it to the back of your neck, and position the ear hooks on your ears. Position the noise-canceling microphone close to your mouth. Make sure you have the transducers resting in front of your ears.

---

How do I adjust the volume?

While your audio is playing, adjust the headset volume by pressing either the “Volume+” or “Volume-” buttons. A “beep” will sound when the volume is at its max.

---

How do I play/pause music?

Click the multifunction button once.

---

How do I play the next song?

Double-click the multifunction button while music is playing.

---

How do I play the previous song?

Triple-click the multifunction button while music is playing.

---

How do I switch the language?

Press and hold both buttons (Power/Volume+ button and Volume- button) while music is playing until you hear a voice prompt.

---

How do I answer a call?

Click the multifunction button once when a call comes in.

---

How do I end a call?

Click the multifunction button once.

---

How do I reject a call?

Double-click the multifunction button.

---

How do I answer an incoming call and end the current call?

Double-click the multifunction button.

---

How do I mute the microphone?

Click the multifunction button once when on a call. Audrey will say, “Mute on”.

---

How do I unmute the microphone?

Click the multifunction button once when on a call. Audrey will say, “Mute off”.

---

How do I answer an incoming call and place the current call on hold?

Press and hold the multifunction button for 2 seconds.

---

How do I switch between calls?

Press and hold the multifunction button for 2 seconds.

---

How do I end a call and switch to a call on hold?

Click the multifunction button once.

---

How do I activate the voice assistant?

Press and hold the mute button for 2 seconds when not on a call.

---

How can I check the battery status?

Click the “Volume+” or “Volume-” button while music is paused. Audrey will tell you what the battery status is: “Battery high/Battery medium/Battery low/Charge me”.

---

How do I switch EQ modes?

Press and hold both buttons (Power/Volume+ Button and Volume- Button) while music is playing until you hear a beep. Audrey will say, “Standard Mode/Vocal Booster Mode”.

---

How do I turn MultiPoint Pairing on?

1. Start with your headset powered off.
2. Press and hold Volume+ until Audrey will say “Pairing” and the LED indicator flashes red and blue alternately.
3. Press and hold the multifunction button and Volume+ button until Audrey will say “MultiPoint enabled”.
4. Open the first device’s Bluetooth menu and select “OpenComm2 by Shokz_II”. Audrey will say “Connected”.
5. Turn your headset off.
6. Re-enter pairing mode by pressing and holding Volume+ until Audrey says “Pairing” and the LED indicator flashes red and blue alternately.
7. Open the second device’s Bluetooth menu and select “OpenComm2 by Shokz_II”. Audrey will say “Connected”.
8. Turn your headset off.
9. Turn your headset on. Your headset is now connected to both devices.

---

How do I turn MultiPoint Pairing off?

1. Start with your headset powered off.
2. Press and hold Volume+ until Audrey will say “Pairing” and the LED indicator flashes red and blue alternately.
3. Press and hold the multifunction button and Volume+ button until Audrey will say “MultiPoint Pairing disabled”.

---

How do I restore factory settings?

1. Start with your headset powered off.
2. Press and hold the “Volume+” button until Audrey says “Pairing”. The LED indicator will flash red and blue.
3. Hold down the Multifunction button, the Volume- button, and the Volume+ button until you hear two beeps.
4. Turn your headset off. The headset is now reset and can be re-paired to your device.

---

How do I change languages?

1. Start with your headset powered off.
2. Press and hold Volume+ until Audrey says “Pairing” and the LED indicator flashes red and blue alternately.
3. Double-press the multifunction button. Languages have been switched when you hear the corresponding language.

---

What should I do when the headset’s battery is low?

When the headset’s battery is low, you will hear a “Charge me” prompt, and the red light will flash. Use the provided charging cable to recharge. The LED indicator will light up red while charging, and the headset will automatically power off. Once fully charged, the LED indicator will turn from red to blue.

---

What do I do if any part of the product is damaged or missing?

If any part of your product is damaged or missing, do not use it. Contact an authorized Shokz dealer or Shokz customer service.