Post questions, comments, reviews or errors in the comment box below.
Your File is Ready … Download PDF
PDF Content Summary: Ninebot segway.com Gokart Kit User Manual 1 Welcome 2Riding Safety Thanks for choosing the Ninebot Gokart Kit, hereinafter referred to as the Gokart Kit. 1. The Gokart is a recreational product. Before mastering riding skills, you need to practice. Neither The Gokart Kit is an accessory developed specifically for the Ninebot by Segway products listed below. When the Gokart Kit is attached to the appropriate Ninebot by Segway product it becomes an electric Gokart. You must read and follow these instructions as well as the instructions provided with the applicable Ninebot by Segway product. Ninebot (Ninebot (Beijing) Tech Co., Ltd. or its subsidiaries and affiliates) nor Segway Inc. is responsible for injuries or damage caused by a driver's inexperience or failure to follow the instructions in this User Manual or in the New Rider Tutorial. 2. Remember as with any mode of transportation, that whenever you drive the Gokart, you risk injury or death from loss of control, collisions, and falls. You can reduce the risk by following all the instructions and warnings in this manual, but you cannot eliminate all the risks. 3. The Gokart kit contains small parts which can create a choking hazard. Keep small children away from the Gokart. Pre-Ride Checklist and Preparing for Your Drive: 1. Before each drive check and tighten any loose parts, fasteners, straps, and replace damaged The Gokart Kit is only suitable for use with the Ninebot by Segway components. miniPRO (Model: N3M260, N3M320). (hereinafter collectively referred to as the miniPRO) 2. To avoid accidents caused by improperly inflated or worn tires, check the tire pressure on the miniPRO tires and wear on all tires before each ride. Do not touch moving or spinning tires. 3. Ensure that the battery level and vehicle operating status are within the specifications contained in Segway miniPLUS, Segway miniLITE, and other similar shaped products the manual of the model being used with the Gokart Kit. cannot be used with the Gokart Kit. 4. Carefully read, understand and follow all instructions in this User Manual and watch and understand the New Rider Tutorial in the App before your first drive. Do not attempt to drive the Gokart if you are not able to drive in accordance with the instructions in this Manual or you risk serious injury or death. WARNINGS 5. Always wear appropriate shoes, clothing, and protective gear when riding. Protective gear includes the use of a helmet, knee pads, and elbow pads (not included). Use an approved bicycle or skateboard helmet that fits properly with the chin strap in place, and provides protection for the back of your head. Remove or tie back anything loose (i.e. clothing, hair, jewelry, etc.) that could be caught in any moving parts. Always fasten the seat belt before riding and ensure it is securely tightened. Loose seat belt can get stuck in the wheels. 6. Do not turn the Gokart on unless it is parked on flat ground. Where to Drive: 1. When entering public spaces, always comply with the local laws and regulations. Only ride in areas where you have first obtained permission from the property owner. 2. The Gokart is designed to be driven on a dry, flat, hard-surface, free of obstacles, bumps, holes, and other hazards. 3. The kinds of surfaces which are appropriate for safe use of the toy. 4. Do not drive on roadways, near motor vehicles, pedestrians, bicyclists, animals, on or near steep inclines or steps, curbs, near swimming pools, through puddles or other bodies of water. Use caution when riding in areas with trees, posts, or fences. You must leave sufficient space between you and those 3 Packing List & Diagram 1 Frame 2 User Manual & Limited Warranty miniPRO Adapter Pad items to be able to safely pass them. 5. The Gokart is never to be ridden indoors. 6. Do not ride the Gokart at night. 7. Do not ride on any ramp or incline that exceeds the maximum slope. 8. Do not ride in the snow, rain, or on roads which are wet, muddy, icy, or that are slippery for any reason. Do not ride over obstacles (including, but not limited to, sand, loose gravel, or sticks). Doing so could result in a loss of balance or traction and could cause a collision. 9. Do not allow the Gokart to get wet. You risk damage to the batteries and potential for a fire or explosion due to a wet battery pack. How to Drive: 1. As with other vehicles, faster speeds require longer braking distance. Sudden acceleration or braking on smooth surfaces could lead to wheel slip and collisions. 2. Be cautious and always keep a safe distance between you and others when driving. Be alert and slow down when entering unfamiliar areas. 3. Do not allow anyone to drive your Gokart on his/her own unless he/she has carefully read this manual, and followed the New Rider Tutorial. The safety of new riders is your responsibility. Assist new riders until they are comfortable with the basic operation of the Gokart and make sure each new rider wears a helmet and other protective gear. 4. To avoid distraction when driving your Gokart, do not use a cell phone, camera, headphones, ear buds or perform any other activities while driving. 5. Be alert! Scan both far ahead and in front of you. Your eyes are your best tool for safely avoiding obstacles and low traction surfaces (including, but not limited to, wet ground, loose sand, loose gravel, and ice). Use caution when transitioning over differing terrain. 6. When approaching or crossing an intersection, road, corner, or gate of any kind, always slow down and yield to others. 7. Do not drive at unsafe speeds. You must always use good judgment based on your driving skills and the surrounding environment. 8. Always slow down when turning. Turning at a high speed can cause loss of control, possible vehicle turn-over, and risk of injury or death. 9. Do not perform stunts of any kind. All four tires must remain on the ground at all times. 10. While driving the Gokart, always remain seated with arms and legs inside the Gokart. 11. Do not carry cargo of any kind. 12. If the Gokart makes an abnormal sound or signals an alarm while driving, stop immediately and do not use the Gokart or miniPRO until the cause of the noise/alarm has been identified and corrected. Contact after-sales service for assistance. Who Should Drive: The manufacturer recommends drivers be at least 8 years old. Children under the age of 16 should only drive under adult supervision. Always follow these safety instructions: A. People who should not drive the Gokart include: i. Anyone under the influence of alcohol, drugs, or intoxicants. ii. Anyone who suffers from disease that puts himself/herself at risk if he/she engages in strenuous physical activity. iii. Anyone whose weight is outside the stated limits (see Specifications). iv. Pregnant women. B. The Gokart is intended for one person only. C. To drive safely, you must be able to clearly see what is in front of you and you must be clearly visible to others. D. Drivers must be able to hear the environment around them. After Each Drive: 1. Park the Gokart on flat ground and power it off. Failure to do so could cause the Gokart to move when exiting potentially causing injury to you and others around you. 2. Allow the Gokart to cool down before charging. Do not attempt to charge the Gokart, if it, the charger, or the power outlet is wet. Follow instructions in the miniPRO User Manual. 3. As with any electronic device, use a surge protector when charging to help protect your Gokart from damage due to power surges and voltage spikes. 4. Only use the charger specified by the manufacturer. Do not use a charger from any other product. 5. Only use Ninebot or Segway approved parts and accessories. Do not modify your Gokart. Modifications to your Gokart could interfere with the operation and performance of the Gokart, which may result in serious injury and/or damage, and could void the Limited Warranty. Maintenance and Storage: 1. Be sure the Gokart is powered off before performing any maintenance or when installing or replacing parts. 2. When installing components, use proper and sufficient force until the component is secure. If the installation is too loose or too tight, the Gokart may not function properly resulting in the potential for injury to you or others or damage to, or malfunction of, the Gokart. 3. Install batteries for the Gokart in accordance with the instructions and ensure that the positive and negative electrodes of the batteries are installed correctly. Only use the batteries specified by the manufacturer. Do not charge the batteries as this may cause a risk of fire or explosion. Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries. When the batteries are dead, purchase and replace them yourself. Correct dress code Wear a helmet No Loose Tie up long hair long Hair (if any) Zip up the zipper To reduce the risk of injury, adult supervision is required. Never use in roadways, near motor vehicles, on Wear or near steep inclines or steps, swimming pools or other bodies of water; always wear shoes, and never allow more than one rider. protective gear Always fasten seat belt, wear a helmet with long hair tucked inside and wear protective gear. Loose clothing or hair can become stuck in wheels or block your vision. Wear appropriate closed toed, secure No long skirts footwear. No loose clothing. Do not drive in rain or snow. When not in use, park the Gokart indoors to avoid water entering and damaging the vehicle. Comply with all local laws and regulations. Risk of death or serious injury from collisions and falls. To reduce the risk of injury user and/or adult must read and follow the user manual. Wear flat shoes 4. Follow all instructions contained in the miniPRO User Manual when performing maintenance on the miniPRO. 5. Do not use a strong water flow or high-pressure hoses to clean the Gokart. Avoid getting water in the charge port. If your Gokart has been exposed to heavy rain store it Seat Steering wheel quick release components outdoors away from buildings and people but protected from the elements until it is dry. 6. Store your Gokart indoors. The miniPRO should be stored in an environment where the Steering wheel temperature is no higher than 122°F (50°C) or lower than -4°F (-20°C). If the temperature of the storage environment is lower than 32°F (0°C), do not charge it until after placing it in a warm environment (over 50°F (10°C). Handbrake handle Battery compartment The data and parameters of the Ninebot Gokart vary with different models. They are subject to change without prior notice. Go to segway.com for updated information. Electrical connection cable plug Located under the frame. Remove the attachment strap before removing from the frame. Scalable structure of frame Seat belt Throttle (right) Brake (left) When unpacking your Gokart, please verify that the above items are included in the package. If you are missing any components, please contact your dealer/distributor or nearest service center (see Contact). Please retain the box and packaging materials in case you need to ship your Gokart in the future. Always power off your Gokart and unplug the power source before cleaning. Connection tube (with frame adjustment marking) Strap fixing hole miniPRO adapter pad Status indicator Headlight 3 Metal mold×2 M5 Screw×2 Nut×2 M6 Screw Steering bar bracket removal tool Attachment straps 4 Hex Wrenches Tools provided to remove the steering bar bracket 5 6 (AA) Batteries To use the Gokart Kit the following accessory must be purchased separately. It can be purchased at segway.com User Manual Limited Warranty 4mm 5mm 6 7 Steering wheel quick 8 Power extension cord release components miniPRO 4 Assembling your Gokart (Requires two adults to assemble) Operating the miniPRO 2Remove the steering bar from the miniPRO Assembling and disassembling the Gokart This assembly is for adults only. Do not power on the miniPRO during assembly or disassembly. The Gokart is assembled by attaching the Gokart Kit to a miniPRO. Before assembly of the Gokart, please review the miniPRO User Manual Assembly 1 Update the miniPRO firmware 3 Check the status of the miniPRO Activate the Gokart Use and charging Before assembly, update the app's firmware and turn Scan the QR code on the right to on Gokart mode. 9 Once fully assembled, make sure: 8 Install the Gokart batteries and follow all instructions contained in it. Once the miniPRO has been review Assembly Instructions. properly activated and charged you can begin assembly of the Gokart. The miniPRO adapter pad and the mini- Unscrew the battery PRO are facing the correct direction. compartment cover and Assembly Instructions 1 Plug the power extension cord into the charging port of the miniPRO, The attachment straps are properly at- insert batteries into the tighten by turning clockwise. tached and tightened. compartment. Close and The electrical connection cable is tighten the cover. Install the app plugged into the power extension cord. To avoid issues that may be The body length and steering wheel caused by corrosion, Download the Segway-Ninebot app (hereinafter referred to as the app) Power extension height is appropriate for the rider. remove the batteries if not by any of the following methods: Scan the QR code below Download in Google Play Store cord 2 Install the miniPRO adapter pad. The battery compartment is closed. If anything appears to be incorrect, Located under the frame. Remove stop using the Gokart and using the Gokart for an extended period of time. or Apple's App Store the attachment strap before removing from the frame. contact after-sales service. 7 Adjust the steering wheel height: a. Press the power button b. Unlock the steering bar to turn off the miniPRO. tool-free release, remove Do not plug the power extension cord into the the steering bar. miniPRO if the power a Raise the steering wheel to a asuitable height. b Insert the quick release Segway-Ninebot App extension cord or charge d. Use a 4 mm hex wrench to remove the screws in Power port is wet. button c b d screw into the hole of the corresponding height. c Tighten the quick release nut. Segway-Ninebot App the steering bar bracket d Press to fix the steering wheel and pull off the bracket. quick release components. * Your mobile phone requires Bluetooth 4.0 or later, iOS system 8.0 or later, or AndroidTM 4.3 or later. Disassembly is completed b e Ensure the steering wheel does after removing the steering not shake. Otherwise, repeat Pair your mobile phone and the miniPRO bar bracket. If you cannot the steps b, c, d, e. Turn on the phone's Bluetooth. Searching remove the bracket by hand, continue to step e. c. Remove the rubber plug on 3 Place the Gokart frame on the miniPRO. Press the power button to turn the steering bar bracket. on the miniPRO. MiniPro0001 Open the app to search for and a connect your miniPRO. b Power c Four screws already inserted button into the screw holes. < 19° Make sure the safety straps are secured to prevent accidental release. Charge ports must be dry. Refer to the chapter “Maintenance” in the miniPRO User Manual to ensure that the tire Disassembly * This firmware update does not involve activation of the miniPRO. If you need to use the miniPRO, please refer to the miniPRO User Manual for related operations. performance, the battery level, and the running status of the miniPRO are normal. Press the miniPRO's power button to turn off the Gokart. 5 Driving the Gokart  Typical Range : Under the circumstances of full power, 154 lbs (70kg) load, and 77°F(25°C) ambient temperature, and measured on a flat road at an 2 average speed of 9 mph (15 Acceleration: lightly press the throttle (right km/h). pedal) to go forward. Deceleration: lightly press the brake (left  Maximum slope: Refers to the pedal) to decelerate. maximum slope that a 220 lbs Steering: steer the Gokart by slightly turning the (100 kg) driver can climb at a steering wheel clockwise or counterclockwise. speed not faster than 3 mph (5 Do not pump the brake pedal to decelerate. km/h).  Front compartment battery: The battery compartment inside the frame that is used to power the frame indicator/headlight. When the battery is low, the blue indicator light turns yellow and blinks. You need to replace the batteries yourself. Activate the Gokart  Braking distance: Under the circumstances of full power, 154 lbs (70kg) load, and measured on a flat hard road at an average speed of 12.4 mph (20 km/h). For your safety, the default values of the Gokart speed and Note: You can also open the App sensitivity are set to low. Use the app to learn how to drive for more specific tips. safely, then the speed limit can be gradually raised. d e. Use the tools provided to remove the steering bar bracket from the miniPRO. The steps are as follows: Update firmware and switch modes In the upper right corner of the app, tap Settings Firmware Update. On the Ninebot settings page, tap "Gokart mode". Enable "Gokart mode". Searching Gokart0001 6 Stretch the frame and adjust the length of the body: Place the steering Fasten the two metal molds onto Insert the M6 screw into the a With both hands holding the steering wheel and the seat, Gokart Mode bar bracket the lower part of the steering bar screw hole on the front of stretch the frame out to a suitable position along the Vehicle Gokart Mode removal tool into bracket by inserting the two nuts metal molds, tightening with 4 Pass the attachment straps through 5 Plug the electrical connection horizontal direction of the connection tube. Vehicle Gokart Kit installation tutorial the screw holes on from the right and the two M5 a 5mm hex wrench, continue the bottom of the miniPRO and the cable of the Gokart into the b Align the scalable structure of the frame with the About Gokart the steering bar screws from the left; tighten with tightening the screw until the strap fixing holes. Tighten the straps. power extension cord. Align marking on the connection tube. Firmware Update bracket. a 4mm hex wrench. steering bar bracket falls off the groove and do not force c Positioning: Use a 5mm hex wrench to press the two Gokart the miniPRO. the cord in. screws into the holes on the left and right connection Mode tube in order, as shown in the figure above (The screw is set to a depth of about 1cm for successful position). d Tighten the 4 screws. Press the power button on the miniPRO to turn on the Gokart. The Gokart will automatically power off when idle for 10 minutes. Open the Segway-Ninebot APP and connect your Gokart. Follow the instructions in the app to activate the Gokart and complete the corresponding tutorial and exercises. If lifting the frame by yourself, do not lift the backside more than 19° or you may damage the bumper. Disconnect the electrical connection cable. Refer to the assembly procedure and carry it out in reverse order. 6 Specifications 2 3 1 56 Product Name Ninebot Gokart Kit N4MZ98 Supported models Name and model Size 43.1×34.1×20.1 in (1095×865×510 mm) Weight Driving Machine Parameters Tires Light Brake Model 1Fastening the seat belt Ninebot by Segway miniPRO (Model: N3M260, N3M320) Sitting on the seat, buckle the left and right parts of the seat belt in front of you. 3 Vehicle size After extension (Max status): 54×32×24 in (1383×822×600 mm); before extension (Min status): 40×32×18 in (1004×822×459 mm) Driving Package size Max payload 220 lbs (100 kg) Net weight 61.3 lbs (27.8 kg) Height requirement 51-75 in (130-190 cm) Recommended Age 8+ years old Speed limit 15 mph (24 km/h) 6 4 Novice speed limit 5 mph (8 km/h) Reversing speed limit 2 mph (3 km/h) Typical Range 9 mile (15km) Reversing Steering ratio 2.1:1 Ground clearance 1.6 in (40 mm) When the Gokart is stopped, double-press 5 Shutdown 15° the brake (left pedal). After you hear a beep, Traversable Terrain the Gokart has switched to reverse mode. Operating temperature 14°F~ 104°F (-10j40°C) Press the throttle to drive the Gokart in Storage temperature -4°F~ 122°F (-20~50°C) reverse. Double-press the brake (left pedal) IP rating IPX4 again to return to forward mode. Model Quantity 6 AA Batteries 4 In the event of a situation that requires an emergency stop, pull the hand brake handle on Charge the Gokart by plugging the miniPRO power cord into the power extension cord. Maximum slope  Make sure the vehicle is completely stopped Hardened road, flat road surface, slopes below 15° before getting off. Press the miniPRO's power button to turn off the Gokart. Front compartment Emergency braking Charging battery Front tires Tire width: 3 in (80 mm); flatness ratio: 60%; hub diameter: 5 in (127 mm) Type Non-inflatable hollow tire Headlight 0.2 Watt white LED light bar the right side of the Gokart to engage the Do not connect the charger if the charge The indicator comes in three colors: blue, yellow, and red. Blue means that the vehicle is in normal emergency brake. port or power cable is wet. Status indicator condition. Yellow means that the vehicle needs to be activated or the batteries in the front compartment need to bereplaced. Red means that the vehicle has a performance failure, and you need to open the app to check the cause of the failure and contact the after-sales service. Follow the relevant charging instructions in the manual and the common battery maintenance and safety knowledge for Braking method Electronic brake + mechanical handbrake maintenance. Ninebot products are designed with overheat protection. If the vehicle temperature exceeds 104 °F (40°C), Braking distance 20 ft (6 m) the vehicle cannot be charged as normal. Wait until the vehicle cools to below 104 °F (40°C) before charging.
Certification 7This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: —Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environ- ment. Industry Canada (IC) Compliance Statement for Canada This device complies with Industry Canada license-exempt RSS standard (s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-3 (B)/NMB-3(B) Neither Segway Inc. nor Ninebot is responsible for any changes or modifications not expressly approved by Segway Inc. or Ninebot. Such modifications could void the user's authority to operate the equipment. Ninebot Gokart Kit(N4MZ98) FCC ID:2ALS8-GK7053 IC: 22636-GK7053
Trademark 8 and Legal Statement 9Contact Ninebot is registered trademark of Ninebot (Tianjin) Tech. Co., Ltd; Ninebot miniPRO, miniPLUS, and Contact us if you experience issues relating to riding, maintenance and safety, or errors/faults with miniLITE are trademarks of Ninebot (Tianjin) Tech. Co., Ltd; Segway is registered trademark of your Gokart Kit. Segway Inc; Apple and Apple Logo are registered trademark of Apple Inc in the United States and elsewhere. App Store is service mark of Apple Inc; Android is trademark of Google Inc, Android robots was originally created by Google Inc; The respective owners reserve the rights of their Segway Inc. trademarks referred to in this manual. 14 Technology Drive, Bedford, NH 03110, USA Tel : 1-603-222-6000 The Ninebot Gokart Kit is covered by relevant patents. For patent information go to segway.com. Fax: 1-603-222-6001 We have attempted to include descriptions and instructions for all the functions of the Gokart Kit at Toll Free: 1-866-473-4929 the time of printing. However, your Gokart Kit may differ slightly from the one shown in this E-mail Sales: email@example.com document. Please note that there are multiple Ninebot models with different functions, and some of the functions mentioned herein may not be applicable to your unit. The manufacturer reserves the E-mail Service: firstname.lastname@example.org right to change the design and functionality of the Gokart Kit product and documentation without Website: segway.com prior notice. Have your Gokart Kit's serial number on hand when contacting Segway. © 2018 Ninebot (Beijing) Tech Co., Ltd. All rights reserved. You can find your serial number on the exterior of the shipping box, on the Product or in the Segway-Ninebot App, while connected to the Product.
FREE ENGLISH PDF
USER GUIDE - USER MANUAL
OWNER GUIDE - OWNER MANUAL
REFERENCE GUIDE - REFERENCE MANUAL
INSTRUCTION GUIDE - INSTRUCTION MANUAL