FREE ENGLISH SCHEPPACH DP55 (01) PDF USER GUIDE
FREE ENGLISH SCHEPPACH DP55 (01) PDF USER MANUAL
FREE ENGLISH SCHEPPACH DP55 (01) PDF OWNER GUIDE
FREE ENGLISH SCHEPPACH DP55 (01) PDF OWNER MANUAL
FREE ENGLISH SCHEPPACH DP55 (01) PDF REFERENCE GUIDE
FREE ENGLISH SCHEPPACH DP55 (01) PDF INSTRUCTION GUIDE
FREE ENGLISH SCHEPPACH DP55 (01) PDF REFERENCE MANUAL
FREE ENGLISH SCHEPPACH DP55 (01) PDF INSTRUCTION MANUAL
FREE ENGLISH SCHEPPACH DP55 (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD SCHEPPACH DP55 (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
What should I do before carrying out maintenance?
What should I check after any repair or maintenance work?
Who should perform repairs on the equipment?
How do I adjust the laser?
1. Make sure that the bench drill is switched off.
2. Remove the six Phillips screws from the right half of the housing and pull off the housing cover.
3. By loosening the hexagon socket screws (a and b), both lasers can be turned and adjusted in the holder.
4. The laser is correctly adjusted when the intersection of the two laser lines indicates exactly the centre of the drill.
5. When the laser is correctly adjusted, tighten the hexagon socket screw to fix the adjustment.
6. Assemble the housing by inserting the six Phillips screws and tighten them.
What are the safety warnings for the laser?
CLICK HERE TO DOWNLOAD SCHEPPACH DP55 (01) PDF MANUAL