SCARLETT SC-HB42S10 (01) PDF Document

The SCARLETT SC-HB42S10 consists of the following three main parts:

1. Motor unit

2. Speed buttons

3. Immersed part of the hand blender

Before connecting the SCARLETT SC-HB42S10 for the first time, check that the voltage indicated on the rating label corresponds to the mains voltage in your home.

The appliance is for home use only and should not be used for industrial purposes or any other purposes than described in the manual.

Do not use the blender outdoors.

Always unplug the appliance from the power supply before cleaning and when not in use.

Do not immerse the unit, cord, or plug in water or other liquids. If immersion occurs, remove the plug from the wall socket immediately and have the unit checked by an expert before using it again.

The appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities unless they have been given supervision or instruction.

Children should be supervised to ensure they do not play with the appliance.

Do not leave the appliance switched on when not in use.

Do not use attachments other than those supplied.

If the power cord is damaged, it must be replaced by the manufacturer, an authorized service center, or a qualified professional for safety reasons.

Do not attempt to repair, adjust, or replace parts. Malfunctioning appliances should only be repaired at the nearest service center.

Keep the cord away from sharp edges and hot surfaces. Do not pull, twist, or wrap the power cord around the appliance.

Handle the blades with caution as they are extremely sharp and dangerous.

Never place the processor into hot ingredients exceeding 70 degrees Celsius.

If the product has been exposed to temperatures below 0 degrees Celsius for some time, it should be kept at room temperature for at least 2 hours before being turned on.

Prior to initial use, wash all removable parts with warm water and a cleansing agent, drying them carefully. Wipe the outside of the motor base with a moist tissue.

Fit the hand blender onto the motor unit. You must complete the assembly fully; otherwise, the device will not switch on.

Ensure the blades are immersed into the mixture before switching the device on to avoid the risk of ingredients spilling.

Make sure all accessories are in place before switching on the SCARLETT SC-HB42S10, then plug in the device.

Press and hold the Pulse button to operate the blender. The food processor will function as long as the button is pressed.

Setting I (low speed): Used mainly for liquid ingredients.

Setting II (high speed): Used for heavier processing, such as mixtures containing both liquid and solid ingredients.

The following table provides guidelines for processing various food items with the SCARLETT SC-HB42S10:

Do not operate the SCARLETT SC-HB42S10 continuously for longer than 1 minute. After 1 minute of operation, ensure there is at least a 4-minute intermission before using it again.

To avoid damaging the blades, do not process hard items such as frozen foods, ice, cereals, rice, spices, and coffee with the SCARLETT SC-HB42S10.

To detach the hand blender from the motor unit, turn it counterclockwise.

Switch off and unplug the appliance from the power supply.

Wash the accessories immediately after each use to avoid soaking them in water for long periods. Use warm sudsy water for cleaning and dry all accessories with a clean soft cloth.

Do not use a dishwashing machine to clean the accessories.

Ensure the SCARLETT SC-HB42S10 is unplugged before storage.

Complete all cleaning and care requirements and keep the appliance in a dry, clean place.