FREE ENGLISH SATO BM-R-75 (01) PDF USER GUIDE
FREE ENGLISH SATO BM-R-75 (01) PDF USER MANUAL
FREE ENGLISH SATO BM-R-75 (01) PDF OWNER GUIDE
FREE ENGLISH SATO BM-R-75 (01) PDF OWNER MANUAL
FREE ENGLISH SATO BM-R-75 (01) PDF REFERENCE GUIDE
FREE ENGLISH SATO BM-R-75 (01) PDF INSTRUCTION GUIDE
FREE ENGLISH SATO BM-R-75 (01) PDF REFERENCE MANUAL
FREE ENGLISH SATO BM-R-75 (01) PDF INSTRUCTION MANUAL
FREE ENGLISH SATO BM-R-75 (01) PDF OPERATING INSTRUCTIONS
CLICK HERE TO DOWNLOAD SATO BM-R-75 (01) PDF MANUAL
If this is not the document you want for this product, click here to see if we have any other documents for this product.
SATO BM-R-75 (01) PDF SUMMARY:
How do I use the clip?
Pass the sensing stem through the holes of the clip. Fasten the sensing stem with the clip on the edge of a pot. If the sensing stem is not locked, expand the plates on both sides.
How do I use the thermometer?
- Put the clip on the edge of the pot, adjusting the angle and depth depending on the shape or size of the pan.
- Put the stem into the object at least 100mm deep from the tip.
What should I not do with the sensing stem?
Do not alter, bend, or bind the sensing stem, as doing so may break or damage the thermometer.
What precautions should I take when measuring high temperatures?
Be careful not to get burned. The stainless steel stem of the probe and clip become extremely hot when measuring high temperature. Wait until the temperature falls before storing.
What should I do regarding the measuring range?
Be sure to use the probe within the specified measuring range. Using it out of the range can cause measuring failures or damages.
What should I avoid doing with the probe?
Do not apply any shocks to the probe. Doing so may cause measuring failures.
What part of the probe should I immerse in the measuring object?
Make sure to insert only the sensing stem into the measuring object. Never immerse the probe into water except for the sensing part.
Should I disassemble or modify the probe?
Never disassemble or modify the probe.
Can I wash the thermometer with water?
Do not wash the thermometer with water.
How should I clean the thermometer after measurement?
After the measurement, wipe the attached object on the stem with a kitchen paper or the like, confirming that the temperature is lower than 40°C.
What should I be careful of when cleaning the stem?
To prevent injury, be careful of the sharp tip of the sensing stem, especially when cleaning the stem after taking measurements.
What should I avoid touching with the sensing stem for accurate measurement?
Be careful not to touch the sensing stem on the bottom of the pot for accurate measurement.
CLICK HERE TO DOWNLOAD SATO BM-R-75 (01) PDF MANUAL