SAMSUNG HG55NE890U (01) PDF MANUAL


Post questions, comments, reviews or errors in the comment box below.

Your File is Ready … Download PDF

CLICK HERE TO DOWNLOAD SAMSUNG HG55NE890U (01) PDF MANUAL


PDF Content Summary: LED TV Installation manual Thank you for purchasing Samsung product. To receive more service, please register your product at http://www.samsung.com/register Model Serial No. Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice. Introduction This TV B2B (Business to Business) model is designed for hotels or the other hospitality businesses, supports a variety of special functions, and lets you limit some user (guest) controls. Operational Modes This TV has two modes: Interactive and Stand-alone mode. y Interactive mode: In this mode, the TV communicates with and is fully or partially controlled by a connected Set Back Box (SBB) or Set Top Box (STB) provided by a hospitality SI (System Integration) vendor. When the TV is initially plugged in, it sends a command that attempts to identify the SSB or STB connected to it. If the TV identifies the SBB or STB and the SBB or STB identifies the TV, the TV gives full control to the SBB or STB. y Stand-alone mode: In this mode, this TV works alone without an external SBB or the STB. The TV has a Hotel (Hospitality) Menu that lets you easily set its various hospitality functions. Please see pages 22 to 26. The Menu also lets you activate or de-activate some TV and hospitality functions so you can create your optimal hospitality configuration. Still image warning Avoid displaying still images (such as jpeg picture files) or still image elements (such as TV channel logos, panorama or 4:3 format images, stock or news bars or crawls) on the screen. Displaying still pictures continually can cause uneven screen wear, which will affect image quality. To reduce the chance that this effect will occur, please follow the recommendations below: y Avoid displaying the same TV channel for long periods. y Always try to display a full screen image. y Reduce brightness and contrast to help prevent the occurrence of after-images. y Use all TV features designed to reduce image retention and screen burn-in. Refer to the proper user manual section for details. Ensuring Proper Ventilation When you install the TV, maintain the distances shown below between the TV and other objects (walls, cabinet sides, etc.) to ensure proper ventilation. Failing to do so may result in a fire or problems with the TV caused by an increase in its internal temperature. ✎ When using a stand or wall-mount, use parts provided by Samsung Electronics only. – If you use parts provided by another manufacturer, it may cause a problem with the product or cause the product to fall, leading to serious injury. Installation with a stand. Installation with a wall-mount.

4 inches 4 inches 4 inches 4 inches 4 inches 4 inches 4 inches 4 inches 4 inches 4 inches 4 inches 4 inches Additional Information

✎ The appearance of the TV and its accessories may differ from the illustrations in this manual, depending on the TV. ✎ Be careful when you touch the TV if it is on or has been on for a period of time. Some parts can be hot. Contents y Accessories .................................................................................................................................................................... 4 y Installing the LED TV Stand ....................................................................................................................................... 5 y Using the TV's Controller ............................................................................................................................................ 7 y The Connection Panel .................................................................................................................................................. 8 y The Remote Control ..................................................................................................................................................... 10 y Using the Samsung Smart Control ........................................................................................................................... 12 y Connecting to the Network ........................................................................................................................................ 17 y Connecting the TV to an SBB or STB ......................................................................................................................... 19 y Setting the Hotel Option Data ................................................................................................................................... 21 y Installing the Wall Mount ........................................................................................................................................... 44 y Anti-theft Kensington Lock ........................................................................................................................................ 46 y Specifications ................................................................................................................................................................ 47 y Supported Resolutions for UHD Input Signals ....................................................................................................... 48 y Display Resolution ....................................................................................................................................................... 48 y Dimensions .................................................................................................................................................................... 50 y Important Warranty Information Regarding Television Format Viewing .......................................................... 52 y License ........................................................................................................................................................................... 53 Symbols Used in this Manual t TOOLS Indicates that you can press the NOTE One-Touch Button TOOLS button on the remote control to use this function. English 3 4 English Accessories ✎ Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer. ✎ The items’ color and shape may vary, depending on the model. ✎ The parts for the stand are listed under Stand Components on the following page. List of Parts

Remote Control (AA59-00817A) & Batteries (AAA x 2) Samsung Smart Control (BN59-01181N) & Batteries (AA x 2) Power Cord Safety Guide / Quick Setup Guide / Regulatary Guide (Not available in all locations) Data Cable (depending on the model) (BN39-00865B, BN39-01011E) COMPONENT IN / AV IN Adapter COMPONENT IN / AV IN Adapter

Wall mount Adapter Cable Guide Installing the LED TV Stand Components When installing the stand, use the provided components and parts. A 1 EA B 1 EA C 49"~55" x4 (M4 x L14) 65" x8 (M4 x L14) D 49"~55" x4 (M4 x L16) Stand Guide Stand Screws 1 2 3 ✎ Place a soft cloth over the table to protect the TV, and then place the TV on the cloth screen-side down. ✎ Insert the Stand Guide into the slot on the bottom of the TV. ✎ Slide and assemble it to the end line in the direction of arrow. C 65" x4 (M4 x L14) D49"~55" x4 (M4 x L16) 5 English 4 5 C x4 (M4 X L14) ! ✎ Progress the assembly of screw in the manual’s order. ! ✎ NOTE – Make sure to distinguish between the front and back of each component when assembling them. – Make sure that at least two persons lift and move the TV. 6 English Using the TV's Controller ✎ The color and shape of the TV Controller may vary depending on the model. ✎ The TV's Controller, a small joy stick like button on the bottom right side of the TV, lets you control the TV without the remote control. Control Menu Press: Move Press & Hold: Select The TV controller is placed at the bottom of the TV. Standby mode Your TV enters Standby mode when you turn it off, and continues to consume a small amount of electric power. To be safe and to decrease power consumption, do not leave your TV in standby mode for long periods of time (when you are away on vacation, for example). It is best to unplug the power cord.

: Power off : Channel Up : Channel Down : Volume Up : Volume Down : Source

TV controller / Remote control sensor 7 English 8 English The Connection Panel 4231657 ✎ Whenever you connect an external device to your TV, make sure that power on the TV and the device is turned off. ✎ When connecting an external device, match the color of the connection terminal to the cable. 1 USB (5V 0.5A), USB (HDD 1.0A) / CLONING – Connector for software upgrades and Media Play, etc. – Service connection. 2 DIGITAL AUDIO OUT (OPTICAL) Connects to a Digital Audio component. 3 HDMI IN 1 (ARC), 2 (DVI) Connects to the HDMI jack of a device with an HDMI output. ✎ No separate sound connection is needed for an HDMI to HDMI connection. HDMI connections carry both audio and video. ✎ Use the HDMI IN 2 (DVI) jack for a DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI adapter (DVI to HDMI) for the video connection and the PC/DVI AUDIO IN jacks for audio. Some DVI or HDMI devices may not or should not need a DVI AUDIO IN connection for audio. ✎ It is recommended that the external device of the HDMI 1.3 or 1.4 version will be used with this TV. If you meet the compatible problem like no sound or the abnormal screen or etc with the device of the HDMI 1.2 version, contact to the Samsung customer care center. Refer to page 52 for the information of the Samsung customer care center. ✎ Use a cable shorter than 10 feet (3m) to get the best UHD viewing quality. 4 DATA – Used to support data communication between the TV and the SBB or STB. – Connects using RJ-12 TV type plugs. 5 LAN Connect to a wired LAN using CAT 7 cable. 6 COMPONENT / AV IN 1 – Use to connect to Component video / audio devices such as DVD players and AV (Composite) devices such as VCRs. – Connect audio cables to "R-AUDIO-L" on your TV and the other ends to corresponding audio out jacks on A/V or Component devices. – The COMPONENT jack is also used as the VIDEO jack. – Connect component video cables (not supplied) to the component jacks ("PR", "PB", "Y") on the rear of your TV and the other ends to corresponding component video out jacks on a DVD player. Match the colors on the jacks and cables. – If you want to connect both a Set-Top Box and a DVD player, you should connect the Set-Top Box to the DVD and connect the DVD to the component jacks ("PR", "PB", "Y") on your TV. – The PR, PB and Y jacks on your component devices (DVD) are sometimes labeled Y, B-Y and R-Y or Y, Cb and Cr. – For AV devices, connect RCA audio cables (not supplied) to "R - AUDIO - L" on the rear of the TV set and the other ends to corresponding audio out jacks on an external device. – When your are connecting a composite (AV) device to AV IN 1 [Y/VIDEO], connect the video cable (Yellow) to the AV IN 1 [Y/VIDEO] jack (Green/Yellow) . 7 ANT IN – To view television channels correctly, the TV must receive a signal from one of the following sources: – An outdoor antenna / A cable television system / A satellite receiver 9 English 10 English The Remote Control ✎ This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired customers. Turns the TV on and off. Display and select the available video sources. Press to directly access channels. Press to select additional digital channels being broadcast by the same station. For example, to select channel Return to the previous channel. ‘54-3’, press ‘54’, then press '-' and ‘3’. Cut off the sound temporarily. Adjust the volume. Change channels. Display the channel list on the screen. Switch to the HOME Screen. Display the main on-screen menu. Displays My Contents, Watch TV and Source icons on the TV screen. Quickly select frequently used functions. Press to display channel and TV information on the TV screen. Select on-screen menu items and change menu values. Return to the previous menu. Exit the menu. Buttons used in Channel list, Media Play menu, etc. SLEEP: Sets the Sleep Timer. button: Enter the hour your want the X: Turns the 3D function on or off. TV to turn on. (Not available) Use these buttons in the Media Play and CC: Controls the caption decoder. Anynet+ modes. Installing batteries (Battery size: AAA) Match the polarity of the batteries to the symbols in the battery compartment. 1 2 3 After you have installed the batteries, use a screwdriver to screw in the screw that holds the battery cover closed. ✎ NOTE – Use the remote control within 23 feet of the TV. – Bright light may affect the performance of the remote control. Avoid using near fluorescent lights or neon signs. – The color and shape of the remote may vary depending on the model. 11 English 12 English Using the Samsung Smart Control Buttons and Functions ¢: Cuts off the sound temporarily. RETURN EXIT MIC: Use the microphone with the Voice Control and Voice functions. – The Voice Control function can be affected by unclear pronunciation, voice level, or surrounding noise. Turns the TV on and off. SEARCH: Run search function. (Not available) MIC KEYPAD: Displays the On-Screen Remote. SOURCE: Displays and lets you select video sources. VOICE: Takes your voice commands and lets you enter text using your TV voice. SEARCH KEYPAD SOURCE VOL VOICE CH Changes channels. Adjusts the volume. Touch pad Place a finger on the touch pad and move the Samsung Smart Control. The pointer on the screen moves in the direction you moved the Samsung Smart Control. Press the touch pad to run the focused item. Press and hold the touch pad to display the Context-Sensitive Menus. GUIDE SMART HUB CH.LIST < > ¡ £: Moves the cursor, selects the on-screen menu items, and changes the values seen on the TV's menu. 3D SLEEP CC ALARM MENU HOME RETURN: Returns to the previous menu. SMART HUB: Brings up Smart Hub applications. – To exit an application quickly, press the TM button. GUIDE: Displays the EPG (Electronic Program Guide). Use these buttons with a specific feature and according to the directions on the TV's screen. MENU: Displays the menu on the screen. HOME: Press to display the HOME menu or the REACH menu or the SINC menu. 3D: Turns the 3D function on or off. (Not available) SLEEP: Press to set when TV will be turned off after a preset period of time. CC: Controls the caption decoder and displays captions on the screen. ALARM: Press to set when TV will be turned on for the alarm. Installing Batteries into the Samsung Smart Control To use the Samsung Smart Control, insert the batteries into the device referring to the figure below. Gently pull on the battery cover's notch and then remove the cover completely once it comes loose. Insert 2 AA alkaline batteries, making sure to align the positive and negative polarities correctly. Using the Samsung Smart Control Motion Function to Operate the TV The Samsung Smart Control has a motion sensor (gyro sensor) that lets you control the TV easily by moving the Samsung Smart Control and using it much like a cordless mouse. Place a finger on the Samsung Smart Control's touch pad, and then move the Samsung Smart Control. A pointer appears on the screen. Move the Samsung Smart Control, and pointer moves on the screen in the direction you moved the Samsung Smart Control and the same distance. Highlight an item on the screen with the pointer, and then press the touch pad to select it. You can also move the Samsung Smart Control in the same fashion to scroll scrollable screens up and down. – If you stop using the Motion Function, even momentarily, put your finger on the touch pad, and then move the Samsung Smart Control to re-start the function. 13 English Using the Touch Pad and the Directional Buttons – In the TV's menu, navigate to Support > Smart Control Tutorial to view a tutorial that shows how to use the touch pad. – If the touch pad's sensitivity is too high or low, navigate to the System > Smart Control Settings menu, and then select the Touch Sensitivity option to change the touch pad sensitivity. Moving the Focus or Pointer Press the directional buttons (up, down, left, and right) to move the focus, pointer, or cursor in the direction you want. Entering the Menu / Selecting an Item To enter a menu or select an item, highlight the item or the menu title, or move the pointer over it, and then press the touch pad. Displaying a Context-sensitive Menus in Smart Hub In Smart Hub, highlight an item, and then press and hold the touch pad. The context-sensitive menu for the item pops up. – The context-sensitive menu may vary depending on the item you selected. Changing the Smart Hub Panel On a Smart Hub panel, drag left or right on the touch pad. The previous or next Smart Hub panel appears. Scrolling on the Web Browser 14 English When you are using the web browser, drag up or down on the touch pad to scroll the web screen. Reconnecting the Samsung Smart Control to the TV If the Samsung Smart Control stops operating or works abnormally, try replacing the batteries. If the problem persists, pair the Samsung Smart Control and TV again. 1. Move to within a foot of the TV, and then aim the Samsung Smart Control at the TV's remote control receiver. Remote Control Sensor 2. Press the RETURN button and GUIDE button simultaneously for 3 seconds. 3. The connection icon appears on the screen. A few moments later, the connected icon appears. The Samsung Smart Control is paired to the TV. The Low Battery Alarm Window If the Samsung Smart Control's batteries become low, the Low Battery Alarm appears on the screen. When the Alarm appears, replace the batteries. We recommend using alkaline batteries for longer operating life. <Low battery Alarm Icon> 15 English Displaying and Using the On-Screen Remote Press the KEYPAD button on the Samsung Smart Control to display the On-Screen Remote on the TV's screen. Use the On- Screen Remote to enter numbers, control content playback, and use the features and functions of the TV, just like a real remote. Use the directional buttons on the Samsung Smart Control to move the cursor on the On-Screen Remote. Press the touch pad on the Samsung Smart Control to select. – The On-Screen Remote buttons may vary depending on the TV features or functions you are using. Button Description 16 English Controls the playback of video, photo, or music files from all sources, and the playback of media content on external devices (for example, a Blu-ray player). a, b, {, } Use these colored buttons to access additional options specific to the feature in use. TOOLS Press to display the Tools menu while you are watching TV. The Tools menu gives you easy access to frequently used functions. The functions listed are context-sensitive and vary depending on how you are currently using the TV. INFO Shows information about the current digital broadcast program or content. MENU Displays the TV's menu on the screen. 3D Lets the 3D source displayed. PIP Lets you display video from an external device or computer on the main screen and a TV broadcast in a picture-in-picture window. CC Select to turn subtitles on or off. P.Size Changes the picture size. SLEEP This function automatically shuts off the TV after a preset period of time. P.Mode Lets you select the Picture Mode. Web Browser Launches the Web Browser. ALARM Set the alarm time when TV will automatically be turned on. Lets you switch channels by entering channel numbers directly. Select Pre-CH to return to the previous channel. Move To The Right / Move To The Left: Moves the Onscreen Remote on the screen. Large Size / Normal Size: Resizes the Onscreen Remote on the screen. Alternatively, navigate to the System > Smart Control Settings menu and select and set the Onscreen Remote Size option. Touch Sensitivity: Lets you change the touch pad sensitivity. Alternatively, navigate to the System > Smart Control Settings menu and select and set the Touch Sensitivity option. Cancel: Select to close a pop up menu. Connecting to the Network You can set up your TV so that it can access the SMART TV applications through your local area network (LAN) using a wired or wireless connection. ✎ After you have “physically” connected your TV to your network, you must configure the network connection to complete the process. You can configure the connection after the Initial Setup process, through the TV’s menu. Network Connection - Wireless Connect the TV to the Internet using a standard wireless router or modem. Wireless IP Router or Modem that has a DHCP Server The LAN Port on the Wall LAN Cable (Not Supplied) Network Connection - Wireless y This Smart TV supports the IEEE 802.11a/b/g /n communication protocols. Samsung recommends using IEEE 802.11n. Otherwise, when you play video over a network connection, the video may not play smoothly. y To use a wireless network, the TV must be connected to a wireless router or modem. If the wireless router supports DHCP, the TV can use a DHCP or static IP address to connect to the wireless network. y Select a channel that is not currently in use for the wireless router. If the channel set for the wireless router is currently being used by another device, the result is usually interference and/or a communications failure. y Most wireless networks have an optional security system. To enable a wireless network's security system, you need to create a security key using characters and numbers, and then enter that key into the router through its menu. You then must enter this security key into any other devices you want to connect to the wireless network. Network Security Protocols The TV only supports the following wireless network security protocols: y Authentication Modes: WEP, WPAPSK, WPA2PSK y Encryption Types: WEP, TKIP, AES In compliance with the newest Wi-Fi certification specifications, Samsung TVs do not support WEP or TKIP security encryption in networks running in the 802.11n mode. If the wireless router supports WPS (Wi-Fi Protected Setup), you can connect the TV to your network using PBC (Push Button Configuration) or a PIN (Personal Identification Number). WPS automatically configures the SSID and WPA key settings. Your Smart TV cannot connect to uncertified wireless routers. 17 English Network Connection - Wired There are three main ways to connect your TV to your network using cable, depending on your network setup. They are illustrated below: The Modem Port on the Wall External Modem TV Side Panel (ADSL / VDSL / Cable TV) Modem Cable (Not Supplied) LAN Cable (Not Supplied) The Modem Port on the WallExternal Modem IP Router that has a TV Side Panel (ADSL / VDSL / Cable TV) DHCP Server Modem Cable LAN Cable LAN Cable (Not Supplied) (Not Supplied) (Not Supplied) The LAN Port on the Wall TV Side Panel LAN Cable (Not Supplied) ✎ The TV does not support network speeds less than or equal to 10Mbps. ✎ Use Cat 7 cable for the connection. 18 English

Connecting the TV to an SBB or STB ETH MODEM TV Rear Panel Data Cable

1. Connect the DATA jack of the TV to the ETH MODEM jack of the STB (SBB) with the Data cable. ✎ The "ETH MODEM" jack name that you connect the Data Cable to may differ depending on the SBB or STB type. 19 English List of Hospitality SI Vendors and Compatible Data Cables Supplied with the TV y Confirm you are using the correct data cable for your SI vendor. Refer to the code label on the data cables. y Contact your nearest dealer or your SI Vendor to buy the data cable not included in the TV. Confirm the code on the Note the labeled end. Code Label Note the labeled end. SI Vendor Cable code Pin assign Remark

Samsung OCC Enseo Guest-Tek BN39-00865B Provided Provided NXTV BN39-01011B nStreams BN39-01110A Sonifi BN39-01011E Provided ✎ Operation Specification of Data Cable(RJ12) : TTL 20 English

Setting the Hotel Option Data To let you control how the TV functions when in Hotel mode, the TV has two Hotel mode menus, the Stand-alone mode menu and the Interactive mode menu. The menu items that differ between the modes are listed below. Menu items in the Stand-alone mode only: – SI Vendor : Smoovie – REACH Server and its submenus. Menu items in the Interactive mode only: – SI Vendor: Samsung and other vendors. All other items appear in both modes. To access the menus, press MUTE → 1 → 1 → 9 → ENTERE on your Samsung remote. After a menu appears, follow these general directions to navigate and change values: – Use the Up and Down arrow buttons on the Samsung remote to move from menu item to menu item. – Press the ENTERE or Left or Right arrow buttons to select a menu item. The screen displays that menu item only. – Press the Left or Right arrow button to change a value. The Right arrow button increases numerical values. The Left arrow button decreases numerical values. – When the screen is displaying one menu item, you can press the Up or Down arrow button to display the next or previous menu item. – Press the RETURN or MENU button to exit the current menu item and go to a higher menu level or the Main menu. – To exit a Hotel mode menu, turn off the TV, and then turn it on again. Any changes you made are saved except changes to SI Vendor. For changes to SI Vendor, you must turn the TV off, wait until the Standby light glows steadily, then unplug the TV, wait for the Standby LED to go off, and then plug the TV in again. Hospitality Mode Standalone Security Mode SI Vendor OFF DRM Power On System Channel Menu OSD Clock Music Mode External Source Eco Solution Logo/Message Cloning REACH Solution Network Widget Solution Virtual Standby Above: The Hotel mode menu To change menus between the interactive mode and the standalone mode, follow the steps below : 1. Highlight the Hospitality Mode menu item in the top left corner of the menu. 2. Press the left or right arrow button on the Samsung remote. Only the Hospitality Mode menu item is displayed. 3. Press the left or right arrow button to change the Hospitality Mode item from Standalone to Interactive or from Interactive to Standalone. 4. Press the Return or Menu button on the remote. The entire menu re-appears with your selection displayed in the Hospitality Mode field. ✎ After you have set the values in one TV, you can clone those values to multiple TVs. See USB Cloning on page 29. 21 English Menu Items To Enter this menu: Press the MUTE → 1 → 1 → 9 → ENTERE buttons in order. To exit from this menu: Power Off (or Power Off and unplug if you have changed SI Vendor), and then turn on again. Any changes you made are saved. Hotel TV Function Category Item Description Hospitality Mode Hospitality Mode Select Hospitality mode. y Interactive mode: TV works with an SI STB or SBB. y Standalone mode : TV works alone, without an SI STB or SBB. SI Vendor SI Vendor y Interactive mode: Samsung / OCC / MTI / Nstreams / Enseo / Cardinal / Guestek / SeaChange / MDC / Innvue y Standalone mode: OFF / Smoovie / SSCP Power On Set the default values that will be applied when the TV is turned. y User Defined: Lets you set Power On Channel and Channel Type manually. See Power On Power On Channel Channel and Channel Type below. y Last Saved: If you select this item, when the TV is turned on, it displays the channel it was displaying when it was turned off. Power On Channel Num When the TV is turned on, it switches automatically to this channel. Power On Channel Type y Select channel band: AIR (analog air band), DTV (digital air band), CATV (analog cable band), CDTV (digital cable band). Power On Volume y User Defined: Lets you set the Power On Volume manually. See Power On Volume below. y Last Saved: When the TV is turned on, it returns to the volume that had been set when the power had been turned off. Power On Volume Num The TV turns on with this Volume Level in Stand Alone Hospitality mode. Min Volume The minimum Volume Level the user can set in Stand Alone Hospitality mode. Max Volume The maximum Volume Level the user in Stand Alone Hospitality mode. Power On Source Select the input source the TV displays when turns on. Power On Option Determines the TV's state when power returns after a power failure or after you have unplugged the TV and then plugged it in again. y Last Option: Returns to its last Power state. If it was in Stand-by, it returns to Standby. If it was on, it turns on. y Power ON: When the power returns, the TV turns on. y Standby: When the power returns, the TV enters the Standby mode. Channel Channel Setup Gives you direct, immediate access to some of the Channel menu functions on the user Channel menu such as Auto Program, Antenna selection, etc. Channel Editor The Channel Editor lets you edit the channels stored in the TV's memory. Using Channel Editor you can: y Change the channel numbers and names, and sort the channels in your desired channel number order. y Apply the video mute to channels you select. The video mute blanks out the video from a channel and outputs only the sound while displaying a speaker icon on the screen. The Channel Editor also lets you view information about each channel easily, without your having to display each channel directly. Mixed Channel Map This Feature enables showing/browsing all antenna type (Air/Cable or Satellite) channels at the same time. y ON: When ON, guests can access the complete Channel Map irrespective of the selected antenna type. The Channel list will also populate Air as well Cable type channels. y OFF: When OFF, guest can access the Channel Map corresponding to the selected antenna type [AIR/CABLE or Satellite] only. The Channel list/Editor will only show the selected antenna type channels. Dynamic SI y ON: Check the DTV Programme channel number. (the TV channel editor is inaccessible) y OFF: Do not check the DTV Programme channel number. (the DTV channel editor is accessible, but additional channel Programme number update is not supported) Mychannel Enable or disable the My Channel feature. Genre Editor Edith the genre for channels. (Available when My Channel is On) 22 English Hotel TV Function Category Item Description Menu OSD Picture Menu Lock Enable or disable the Picture Menu. Menu Display y ON: The Main Menu is displayed. y OFF: The Main Menu is not displayed. Tools Display y ON: The Tools Menu is displayed. y OFF: The Tools Menu is not displayed. Channel Menu Display y OFF:The Home Menu is not displayed. y ON:The Home Menu is displayed. Panel Button Lock Turning the front panel (local key) operations on/off. y Unlock: Unlocks panel key. y Lock: Locks panel key. y OnlyPower: The Panel key can only be used to turn the power on or off. Home Menu Display y OFF:The Home Menu is not displayed. y ON:The Home Menu is displayed. Home Menu Editor Edit Home Menu . Home Menu Auto Start y ON:The Home Menu is Auto Start. y OFF:The Home Menu is not Auto Start. BT Auto Remove Device List y Delete Device List in when power on or off. y ON: Connection history is removed in BT Music Player. y OFF: Disable this feature. Clock y OFF: The feature of SW Clock becomes not available. Clock Type y SW Clock: If this item is selected and a user presses the INFO key of the remote twice consecutively in the standby mode of TV, the clock information is displayed in the screen of TV and then TV is turned off automatically. Local Time Select the way to update the clock data y Manual: The clock is set automatically from the DTV channel or manually by the user when the TV is in stand-alone mode. y Time Channel: The clock is set from the selected channel. Timer Type Enable or disable the alarm function. y WakeUp : Enable the alarm function to turn on the device at the specified time. y OnOff : Disable the Alarm function. Music Mode Allows music output from an mp3/audio player connected to an AV Input Source on the Music Mode AV TV. When on, you can hear sound from the player through the TV whether there is a video signal or not. Also mutes the video so the TV does not display a picture when a guest is playing music. The TV's backlight, however, remains on. Music Mode Comp Allows music output from an mp3/audio player connected to an Component Input Source on the TV. When on, you can hear sound from the player through the TV whether there is a video signal or not. Also mutes the video so the TV does not display a picture when a guest is playing music. The TV's backlight, however, remains on. Music Mode Backlight When set to Off, the TV's backlight is turned off entirely when a guest uses the Music mode. To save energy, set to Off. External Source When USB is connected to the TV : USB Pop-up Screen y Default: a popup window appears. y Automatic: This enters the USB content menu automatically. y Disable: Neither the popup window nor the menu appears. External Source Banner If set to On, the TV displays the External Source Banner (information) when you change the TV source to another external input, press the Info key, or turn the TV on. y ON: The External Source information is displayed on the TV screen. y OFF: The External Source information is not displayed on the TV screen. Auto Source y ON: When an external input source is connected to the TV, the TV identifies the input source, and then automatically switches to that input source. y OFF: Auto Source function is Off. Anynet+ Return Source Select the return TV source after stopping an Anynet+(HDMI-CEC) connection. (This fuction is especially useful for the Guestlink RJP.) Eco Solution Energy Saving Adjusts the brightness of the TV to reduce power consumption. y OFF: Turns off the energy saving function. y Low: Sets the TV to low energy saving mode. y Medium: Sets the TV to medium energy saving mode. y High: Sets the TV to high energy saving mode. 23 English 24 Hotel TV Function Category Item Description Logo/Message EnglishWelcome Message Displays a the Welcome Message for 5 seconds when the TV turns On. Edit Welcome Message Edits the Welcome Message. Hospitality Logo Turns the Hospitality logo feature OFF, BMP, AVI, BOTH. If not OFF, when the TV is turned on, the Logo is displayed, before the signal from the initial source, for the amount of time set in “Logo Display Time”. Hospitality Logo DL Downloads the Hospitality logo. Hospitality logo file requirements: y BMP or AVI files only. y Max file size: BMP - 960 X 540. AVI - 30MB. y The file can only be named samsung.bmp or samsung.avi. Logo Display Time Hospitality Logo Display Time (3/5/7 seconds). Cloning Clone TV to USB Clone the current TV options to a USB memory device. Clone USB to TV Clone the saved TV options on a USB memory device to the TV. Setting Auto Initialize If you set Setting Auto Initialize to On, and the TV's power is turned off and on, TV menu items are restored again to their values cloned initially. See page 32. REACH Solution REACH y ON: The feature of REACH in this TV becomes available. y OFF: The feature of REACH in this TV becomes not available. REACH IP Mode If enabled, Reach will work over IP instead of RF. Server IP Setting The URL of the Reach IP server, for example https:\\192.168.1.2:443. REACH Channel Assign a DTV channel number to carry the update REACH data. This channel number must be the same as the number set on the Reach server. REACH Update Time Lets you set when data such as updated SW, cloning files, and S-LYNC REACH contents is downloaded from the REACH server to the TV : y 1hour: Every hour y 2hour: Every 2 hours y 12:00 am: every 12:00 a.m. y 2:00 am: every 2:00 a.m. y 12:00 pm: every 12:00 p.m. y 2:00 pm: every 2:00 p.m. REACH Update Immediate y ON: Whenever the TV enters standby mode (the power cord is plugged in and the power is off), the REACH data is updated on the TV. y OFF: The REACH data is only updated on the TV at the REACH server update time. Group ID Select the group ID of the REACH server. (Refer to the REACH server manual for more details) Room Number Set the room number IPG Room Type Selects the IPG room type of the REACH server. (Refer to the REACH server manual for the more information.) REACH Config Version The version of REACH is displayed. Network If this item is entered into, network setup menu is displayed. The network setup menu is used for setting network like access internet. Soft AP: Using this function, you can connect the TV on your mobile devices. Set the options for connection of Wi-Fi device. y Soft AP: Turns on or off the Soft AP. When Soft AP is set to On, your mobile devices can find the TV name in Wi-Fi connection list. y Security key: Set a security key that you need to enter on other devices so they can Network Setup connect to the TV. – Input the generated security key into the device you want to connect. – If network does not operate normally,check the security key again. An incorrect security key may cause a malfunction. ✎ Soft AP may not be available if it is not supported by the model. ✎ Maximum number of devices that can be connected: 4 devices. ✎ Bitrate : 10 Mbps/device. ✎ The specifications above are based on our in-house testing. Actual performance may vary depending on your wired/wireless network environment. SmartHub Model Setting Set SmartHub Model. SmartHub Setting Set up SmartHub. Service Discovery TV can be searched in the DLNA environment. (default: On) After changing the values, TV rebooting is needed. User can search TV in the DLNA environment. (ex, Samsung Smart View App) User search and add TV in the DLNA environment. Hotel TV Function Category Item Description Widget Solution y ON: The TV mode is changed to the Widget mode that TV accesses to the hospitality server Widget Mode through IP connection and the guest uses various services and features through Widget of TV y OFF: The TV mode becomes normal the hospitality mode. Solution Type Select the type of the solution server installed in your site for the widget service. y Vendor Server: In the case of that the special SI vendor of the server is installed in your site. y SINC Server: In the case of that the Samsung SINC server is installed in your site. Server URL Setting If this item is entered into, URL of the solution server can be inputted. License Server IP Setting If this item is entered into, URL of the license server can be inputted. IPTV Mode y ON: The IPTV mode that watches the broadcasting through the IP network is enable. y OFF: The IPTV mode is not disable Room Num Setting Set the room number PHY Sleep Mode y ON : WOL is enable. y OFF : WOL is disable. (Default) Virtual Standby TV can supply the main feature in the standby mode if The TV mode is set to the Virtual Standby mode. y ON: The Virtual Standby mode is enable. y OFF: The Virtual Standby mode is disable. When Virtual Standby is On, TV power consumption will be 9.5W to 17.4W (Depending on ithe size of the TV screen). Reboot Time This Feature can set the Reboot interval of TV after TV enters Virtual standby Mode. Security Mode Virtual Standby Mode Delete Device List in when power on or off. Factory Lock y ON: The password is needed before entering factory menu. y OFF: disable this feature. Password Input If this option is enabled, a popup input box appears which asks for an 8-character security password. The admin must enter a password before applying or updating security preferences. After the correct password is entered, options such as Password Setting, Password Reset and Security Mode are available. Password Setting User can change the password. Password Reset Password is reset to "00000000". Password Popup Enable/disable Password Popup. If this option is set to OFF, the TV will not display the password input popup window when entering the Factory menu. If set to ON, the password input popup window appears. Security Mode Security Mode provides password protected administrative functionality to enable or disable features of Hospitality TV, such as HDMI, USB and TTX. Use this option to turn security mode on or off. After turning on security mode, options such as "USB," "HDMI" and "TTX Security” are automatically enabled in the security sub-menu. “USB to TV cloning” and “TV Reset” will be disabled in the Hospitality Menu. USB Enable/disable USB access. When disabled, access to USB media is blocked. HDMI Enable/disable HDMI access. If disabled, Anynet, HDMI source, HDMI type External Channels will not be accessible to the user. DRM Configures DRM support. OFF: Turns off DRM support. DRM Mode LYNK DRM: Select to turn on S-LYNK DRM CAS support only. Pro:idiom: Select to turn on Pro:Idim CAS support only. LYNK DRM,PI: Select to have the TV support S-LYNK DRM CAS and Pro:Idiom CAS. PI AES Data Displays the current state of Pro:Idion AES PI AES Log y ON: Output of Pro:Idiom AES log is enable. y OFF: Output of Pro:Idiom AES log is disable. View PI AES Log If this item is entered into, the Pro:Idiom AES log is displayed. 25 English 26 Hotel TV Function Category Item Description System Englishy Enter Self Diagnosis Menu. Self Diagnosis for TV Picture Test: Use to check for picture problems. If the problem appears in the test picture, select Yes and follow the directions on the screen. y Sound Test: Use the built-in melody sound to check for sound problems. If the problem occurs during the test, select Yes and follow the directions on the screen. Self Diagnosis for HTV Lets you check the state of Pro:Idiom and its communication with the SI STB or SBB. If you have any problems with the Pro:idiom encryption channel or the communications with the SI STB or SBB, use this diagnosis function. If Pro:Idiom DTV Channel Key Loss appears to have failed and the Pro:Idim encryption channel has failed to play content, first check the broadcasting systems related to Pro:Idiom encryption. If your broadcasting system does not have a problem, contact Samsung Service. If STB SI Vendor Setting appears to have failed and communication with the SI STB or SBB has failed, first check your SI STB or SBB. If your SI STB or SBB does not have a problem, contact to Samsung Service. SW Update Lets you upgrade the TV SW with a USB memory stick. See Page 39. Service Pattern Lets you check the state of the TV picture by displaying picture test patterns. Press the Menu button to turn off the test patterns and exit. ATV Cable AGC Gain Lets you control the AGC gain of the analog cable channels. Don't change the default value unless problems occur. DTV OpenCable AGC Gain Lets you control the AGC gain of the digital cable channels. Don't change the default value unless problems occur. Sound Bar Out If the Samsung Sound Bar device is connected to this TV, this item lets you to select where the TV sound is outputted when the TV is turned on. y ON: When the TV is turned on, the TV sound is automatically outputted in the Sound Bar device only. y OFF: When the TV is turned on, the TV sound is automatically outputted in the TV speaker device only. Contact Samsung Display the web site of related Samsung service center, software version, and Mac address information. Standby LED When the TV is in standby mode, you can configure the settings of external LED. y ON: The LED is on. y OFF: The LED is off. TV Reset Returns all settings on the TV to their factory defaults. ✎ REACH (Remote Enhanced Active Control for Hospitality) is a professional, interactive remote controller that lets you deliver TV firmware updates, cloning data, channel mapping changes, REACH contents, and TICKER contents through RF DTV to several hundred hospitality TVs simultaneously. The REACH functions are available only in standalone mode. The REACH Server is sold separately. Refer to the REACH server manual enclosed with the REACH server product for more operating information. Welcome Message The Welcome Message feature displays a custom message on the TV every time it is turned on. – Welcome message settings are in the Hotel Option Menu. – Set Welcome Message to ON to display the message when the TV is powered on. Welcome Message OFF Edit Welcome Message Hospitality Logo OFF Hospitality Logo DL ... Logo Display Time ... – You can make the Welcome Message up to 25 characters long and edit it in the Hotel Service menu. – Welcome Message supports the following characters: ✎ Capital Letters from A to Z. – You can edit the Welcome Message by using the remote's navigation, color, and Enter buttons in the “Edit Welcome Message” OSD (See the illustration below.) Edit Welcome Message W E L C O M E T O O U R H O T E L _ A B C D E F G

H I J K L M N O P Q R S T U V W X Y Z ab{} Move to Left Move to Left Move to Right Leave Black Leave Black Done Done Move Enter Return Return

Below are the general directions for navigating and changing letters on the Edit Welcome Message screen: – Press the a button on the remote to move to the left in the message. – Press the b button to move to the right. – After you have selected a position in the message, use the arrow buttons on your remote to select a letter in the alphabet below the message. – Press Enter to place a letter into the position you selected. – Press the { button to erase a letter in a position or enter a blank. – Press Return or the } button to exit. 27 English Hotel Logo The Hospitality Logo function displays the Hotel's picture image when the TV is powered on. – Hospitality Logo settings are the Hotel mode menus. – The Logo Download and Logo Display Menu items are enabled when you turn the Hospitality Logo option on. – If there is a logo image stored in memory and the Hospitality Logo option is on, the Hospitality logo is displayed when the TV is turned on. – The Hospitality logo is not displayed when the Hospitality found Logo option is off, even if the logo image has been loaded into the TV. Hospitality Mode Standalone Security Mode SI Vendor OFF DRM Power On System Channel MyChannel Menu OSD Clock Music Mode External Source Eco Solution Logo/Message Cloning REACH Solution Network Widget Solution Virtual Standby Welcome Message OFF Edit Welcome Message r Hospitality Logo OFF Hospitality Logo DL ... Logo Display Time ... y Hospitality Logo – This option lets you choose whether the Hospitality Logo image is displayed or not. – Initial value is OFF. – Can be set to BMP, AVI, BOTH. – When set to BMP, AVI, BOTH, the Logo Download and Logo Time Display menu items become accessible. y Logo Download – This option lets you download the logo image to the TV’s memory from a USB device. – A wait message appears while the image is being copied to the TV. – A "completed" message appears when the copy operation finishes successfully. – The word "failed" appears if the copy operation was unsuccessful. – No USB appears if no USB device is connected. – No File appears if there is no file to copy on the USB device or the file is in the wrong format (must be a BMP or AVI file). If No File appears and there is a logo file on the USB device, check the file format. y Logo File Format – The TV supports only BMP and AVI format. – The file name must be samsung.bmp or samsung.avi. – The maximum resolution of the BMP format is 960 x 540. – The maximum file size for AVI format is 30MB. – The TV does not change the size or scale of the image. 28 English USB Cloning The USB Cloning function lets you download user-configured settings (Picture, Sound, Input, Channel, Setup, and Hotel Setup) from one TV to a USB device, and then upload these settings from the USB device to other TV sets. This lets you create a standard file of settings and distribute that standard file to all the TVs in your facility. ✎ After cloning, certain features are applied when the TV is turned on again. y Cloning TV to USB: Copies stored menu settings from a TV to a USB device. 1. Insert a USB drive into the USB port on the rear of the TV. 2. Enter the hotel option menu by pressing buttons in order. MUTE → 1 → 1 → 9 → ENTERE 3. Press the ▲ or ▼ button to select Cl one:TV to USB, and press the ENTERE button. 4. When the message Clone: TV to USB is displayed. Press the ENTERE button. 5. The TV displays one of the following messages: y In Progress: Copying data to USB. y Completed: Copy was successful. y Failed: Copy was not successful. y No USB: USB is not connected. The clone folder will be labeled T-MST14AKUCB. ✎ The cloned values include the values on the Guest side menu (brightness, picture size, contrast, etc.) and the Hotel side menu. Clone TV to USB Clone USB to TV Setting Auto Initialize OFF Cloning USB to TV: Copies menu settings in a USB device to a TV. ✎ Shortcut: Turn the TV off, insert the USB device, turn the TV on, and then press the ENTERE button for 5 seconds. To clone data to the TV using the Hotel menu, follow these steps: 1. Turn the TV off. 2. Insert the USB drive into the USB port on the rear of the TV. 3. Turn the TV on. 4. Enter the Interactive menu by pressing these buttons in order. MUTE → 1 → 1 → 9 → ENTERE 5. Press the ▲ or ▼ button to select “Clone USB to TV”, and then press the ENTERE button. 6. The message Clone: USB to TV is displayed. Press the ENTERE button. 7. The TV displays one of the following messages: Clone TV to USB Clone USB to TV Setting Auto Initialize OFF y In Progress: Copying data to TV. y Completed: Copy was successful. y Failed: Copy was not successful. y No USB: USB is not connected y No File: There is no file to copy on the USB device. If you get a No File message, check the folder on your USB device. The folder name should be T-N14UKAKUCB. ✎ Tables that list the settings that are cloned in the Interactive and Standalone Hotel Menus begin on the next page. 29 English Settings Cloned in the Hotel Menu Menu Item Cloning Support Hospitality Mode Yes SI Vendor Yes Power On Channel Yes Power On Channel Num Yes Power On Channel Type Yes Power On Volume Yes Power On Volume Num Yes Min Volume Yes Max Volume Yes Power On Source Yes Power On Option Yes Channel Setup N/A Channel Editor N/A Channel Bank Editor N/A Channel Bank Service Level Yes Mixed Channel Map Yes Dynamic SI Yes Channel Rescan Message Yes Pan Euro MHEG Yes Channel Auto Store N/A Mychannel Yes Genre Editor N/A Mute On CC Yes Subtitle Auto On Yes TTX Widescreen Mode Yes Picture Menu Lock Yes Menu Display Yes Tools Display Yes Channel Menu Display Yes Panel Button Lock Yes Home Menu Display Yes Home Menu Editor N/A Home Menu Auto Start Yes Gallery Mode Editor N/A Bluetooth Music Player Yes Clock Type Yes Local Time Yes Time Format Yes Clock Test N/A Clock Normal Dim. Yes Clock Standby Dim. Yes Timer Type Yes Time Channel Type Yes Time Channel Num Yes Music Mode AV Yes 30 English Menu Item Cloning Support Music Mode PC Yes Music Mode Comp. Yes Music Mode Backlight Yes HDMI Music Mode Yes Video Out Yes USB Pop-up Screen Yes External Source Banner Yes Auto source Yes Anynet+Return Source Yes HP Mode Yes Default HP Volume Yes Main Speaker Yes Pillow Speaker Type Yes Speaker Select Yes Pillow Volume Yes Energy saving Yes Energey Saving Timer Yes Welcome Message Yes Edit Welcome Message N/A Hospitality Logo Yes Hospitality Logo DL N/A Logo Display Time Yes Clone TV to USB N/A Clone USB to TV N/A Setting Auto Initialize Yes REACH 3.0 Yes REACH 2.0 Yes REACH Channel Yes Group ID N/A IPG Room Type Yes Ticker Yes REACH Update Time Yes REACH Update Immediate Yes Room Number N/A REACH 2.0 TV Sound Yes REACH Server Version N/A Network Setup N/A SmartHub Model Setting N/A SmartHub Setting N/A Service Discovery Yes VLAN ID Yes Solution VLAN ID N/A Device VLAN ID N/A 31 English 32 English Menu Item Cloning Support Widget Mode Yes Solution Type Yes Server URL Setting N/A License Server IP Setting N/A IPTV Mode Yes Virtual Standby Yes Instant On Yes Room Num Setting N/A Widget Resolution Yes PHY Sleep Mode Yes MDC ID Settings Yes TV Version Yes Door Eye Mode Yes Door Eye Source Yes Prompt OSD Yes Source Return Time Yes Password Input N/A Password Setting N/A Password Reset N/A Security Mode Yes USB Yes HDMI Yes TTX Security Yes DRM Mode Yes PI AES Data N/A PI AES Log Yes View PI AES Log N/A Self Diagnosis for TV Yes Self Diagnosis for HTV PI DTV Channel Key Loss N/A STB SI Vendor Setting N/A Bathroom AMP N/A RTC N/A SW Update N/A Service Pattern Yes ATV Cable AGC Gain Yes DTV Open Cable AGC Gain Yes Sound Bar Out Yes Contact Samsung N/A Standby LED Yes TV reset N/A Multi Code Remocon A Multi Code Remocon is a special remote which is designed to control multiple TVs. This function is useful where there is more than one TV in a location. You can control up to 10 TVs with a different ID code of each remote with no conflicts between the TVs. ID numbers are displayed on each TV's OSD. The Initial ID code for each TV is “0”. – You can set and reset the ID code in Analog TV mode or PC mode. (Not available in DTV mode.) – You can set the ID code to any digit from 0 to 9. – To set a TV's ID code, follow these steps: 1. Aim the remote at the TV, and then press the MUTE button and the RETURN button simultaneously for more than 7 seconds. When you stop pressing the buttons, the TV displays the current ID in the middle of the screen and the words, "Remote control code is set to 0. If you want to change the Remote control code, enter the digit you want to change." 2. Press the number on the remote you want to assign to the TV. The TV displays the following words: "Remote control code is changed to x." ✎ The TV will display the OSD until you press the EXIT button. See the example below. Remote control code is set to 0. If you want to change Remote control code, enter the digit you want to change. Example: After you see the message above, if you press 1, the TV and Remote will be set to ID code 1. The TV then displays the following message: “Remote control code is changed to 1” The TV can then only be controlled by a remote which has the same ID code (1). – To reset the ID code, press the MUTE button and the EXIT button simultaneously for more than 7 seconds. When you stop pressing the buttons, the ID codes of the TV and Remote are reset to “0”. “Remote control code is set to 0.” appears on the TV 33 English Setting Auto Initialize When you clone settings from one TV to another, you clone both the guest side menu and hotel side menu settings: Picture, Sound, Input, Channel, Setup, and Hotel Setup. This lets you set nearly all of the menu values on your hospitality TVs to the same, standard settings. If you allow guests access to the guest side menus, for example the Picture menu, they can change the settings in those menus so they are no longer standard. If you set the Setting Auto Initialize function to on the TV automatically restores (initializes) any guest-side menu values to the cloned, standard values when the TV is turned off and then turned on again. Note that Setting Auto Initialize works on cloned guest side menu values only. Settings which have not been cloned are ignored. The table below lists the settings that are restored to their cloned values when you set the Setting Auto Initialize function to On.Menu Menu Item Picture Menu Menu Item Picture Mode Back light Contrast Brightness Sharpness Color Tint (G/R) Apply Picture Mode Picture Size Picture Size Position PIP Advanced Settings Dynamic Contrast Black Tone Flesh Tone RGB Only Mode Color Space White Balance Gamma Motion Lighting System Picture Options Color Tone Digital Clean View MPEG Noise Filter HDMI Black Level Film Mode Analog Clean View LED Clear Motion Picture Off Reset Picture Sound Accessibility Voice Guide Video Desciption Caption Menu Transparency High Contrast Enlarge Menu Language Smart Control Settings Motion Sensitivity Touch Sensitivity Onscreen Remote Size Voice Control Language TV Voice Voice Gender Device Manager Keyboard Settings Mouse Settings Time Clock Sleep Timer Wake-up Timer Eco Solution Energy Saving Eco Sensor No Signal Power Off Auto Power Off Smart Security Auto Protection Time Change PIN Sound Mode General Sound Effect Game Mode DTS TruSurround HD Sound Feedback DTS TruDialog Boot Logo Equalizer Anynet+ (HDMI-CEC) Speaker Settings Anynet+ (HDMI-CEC) Additional Settings Auto Turn Off HDMI Audio Format Device search Reset Sound DivX® Video On Demand 34 English Hotel Plug & Play The Hotel Plug & Play function, which automatically performs the Hotel mode selection, Country Setup, Clock Setup, and Picture Mode Setup, runs once, when power is first turned ON. Setup also runs automatically after you have executed a Service Reset. y UI Scenario Self Diagnosis for TV If you select Factory Reset, the TV resets all values to their Self Diagnosis for HTV SW Update factory defaults and then displays the Hospital Plug & Play Service Pattern OFF menu. Go to the first Hospital Plug & Play screen below. ATV Cable AGC Gain Default DTV OpenCable AGC Gain Default Sound Bar Out OFF Contact Samsung Standby LED ON TV Reset E + P If you change the country of the Current Location If you select TV Basic E If you select Factory Menu Setup The TV is automatically E turned off and on. If you don't change the country of the Current Location If you select Cloning Mode Copy the system settings from the USB or server Eto the TV. End setup and go to Factory Menu directly. E E E E Select your language Select Picture mode Select the channel band to use for Auto Program EPress Power OFF to exit. After Searching channels. E E Hotel Option Menu appears. E ESelect Clock Mode, DST, and your Time Zone Setup Complete! Your TV is now ready to use. Done 05 Auto Program Auto Program is finding channels for you... DTV Air 4 40% DTV Air Air DTV Cable Cable 35 English y LocalSet – Initially highlighted: US – If you press the Enter key after selecting Change, you can change the country. – If the country is changed, the TV automatically turns off and on. – If you select the incorrect country, execute TV Reset again after entering the System section of the Hotel Menu. y Menu Language OSD – If you select TV Basic Setup from the "TV Installation Type" OSD, the “Menu Language” OSD appears. – Initially highlighted: English – If you press the Enter key, the “Picture Mode” OSD appears y Picture Mode OSD – Initially highlighted: Standard. – The TV displays the Picture Mode OSD where you can choose the Dynamic or a Standard Picture mode. y Auto Program OSD – If you press the Enter key, the TV automatically searches for channels. y Set Clock Mode, DST(Daylight saving time), and Time Zone OSD – Initially highlighted: Clock Mode : Auto, DST : Off, Time Zone : Eastern – If the TV will be tuned to digital broadcast channels, and these channels transmit date and time information, set the Clock Mode to Auto. The TV will set the date and time automatically. – If the TV will not be tuned to digital broadcast channels, set the Clock Mode to Manual, and then set the date and time on the TV manually. – Set DST On or Off to apply or not apply daylight saving time to the TV. – Select your time zone on the map that appears. 36 English USB Software Upgrade Method Samsung may offer upgrades to the TV’s SW in the future. Please contact the Samsung Hospitality Hot line at 1-866-sam4biz to receive information about downloading upgrades and using a USB drive to update the SW by connecting the USB drive containing the upgrade to the USB port located on the TV. When the software is upgraded, video and audio settings you have made will return to their default (factory) settings. We recommend you clone the hospital settings so that you can easily reset them after the upgrade. To upgrade the TV's software, follow these steps: 1. Insert a USB drive containing the SW upgrade into the USB port on the side of the TV. 2. Press the MENU button to display the menu. Press the ▲ or ▼ button to select Support, and then press the ENTERE button. 3. Press the ▲ or ▼ button to select SW Upgrade, and then press the ENTERE button. The message "Scanning for USB. This may take more than 1min." is displayed. 4. The message "Upgrade version XXXX to version XXXX? The system will be reset after upgrade." is displayed. Press the ◄ or ► to select OK, and then press the ENTERE button. Please be careful to not disconnect the power or remove the USB drive while upgrades are being applied. The TV will turn off and turn on automatically after completing the SW upgrade. Please check the SW version after the upgrades are complete. Soundbar(AirTrack) y Samsung Soundbar(AirTrack) and Hospitality TVs in 2016 – Samsung Soundbar(AirTrack) and hospitality TVs support the HDMI ARC feature If you connect a compatible Samsung Soundbar(AirTrack) to a compatible Samsung hospitality TV using a single HDMI cable, guests can listen to the TV's sound through the Soundbar(AirTrack). – The item of Soundbar(AirTrack) Out in Hospitality Option Menu makes you control to where the TV sound is outputted when the TV is turned on. If Sound bar Out is On, the TV sound is automatically outputted in the Soundbar(AirTrack) device only whenever TV is turned on. If Sound bar Out is Off, the TV sound is automatically outputted in the TV speaker only whenever TV is turned on. – Models supporting the ARC function are listed below: y Sound-Bars: HW-H450/H550/H570/H600/H7500 HW-J450/J470/J550 HW-K450/K550 y Setting the Soundbar(AirTrack) to Hotel Mode. 1. Set the following Hotel menu options: – Hotel option > External Device > Sound Bar Out = On. – Hotel option > Power On > Power On Volume = User Defined. – Hotel option > Power On > Power On Volume Num > Set greater than 0. – Hotel option > Power On > Max Volume > Set greater than 0. 2. Connect an HDMI cable from the HDMI OUT jack on the back of the Soundbar(AirTrack) to the HDMI IN 1 port (supporting ARC) on the hospitality TV. 3. After the Soundbar(AirTrack) is connected to the hospitality TV, when the TV turns on, the Soundbar(AirTrack) automatically detects the TV, and then automatically switches to Hotel Mode. 37 English Soundbar(AirTrack) Hotel mode functional characteristics: y Power On/Off is synchronized with the TV y HDMI_CEC defaults set to On y Functions through the “HDMI OUT” port only y Disables the "Input mode" key on the VFD to prevent unexpected audio-source changes. y Acquires adjustable Power On and Max Volume settings from the TV’s Hotel option menu. Soundbar's Power On Volume and Max Volume values, however, are 1⁄2 of Power On Volume and Max Volume settings in the TV's Hotel option menu. Example: If the TV's Power On Volume=20 and Max Volume=90, then Soundbar's Power On Volume=10 and Max Volume=45. Channel Bank Editor (Smoovie TV Only) The Channel Bank Editor in conjunction with the SMOOVIE remote lets you control the channels guests have access to. The Channel Bank Editor provides three Banks of channels and lets you select which channels will be available from each bank. SMOOVIE remotes have installable Bank Cards which correspond to the channel banks in the Channel Bank Editor. The remotes only allow access to channels in the channel bank that correspond to the installed card. Consequently, the channels a guest can access depend on the Bank Card installed in their SMOOVIE remote. Setting the Channel Bank Editor under Stand-alone Mode 1. Press MUTE → 1 → 1 → 9 → ENTERE on the remote to enter the Hotel Standalone menu. 2. Go to SI vendor, and then select : “Smoovie” 3. Find the new menu option, "Channel" → "Channel Bank Editor". 4. Enter the “Channel Bank Editor”. Hospitality Mode Standalone Widget Solution SI Vendor OFF DRM d SI Vendor Smoovie d SI Vendor Smoovie d SI Vendor Smoovie <Depending on model and region, some menu items may not exist.> 38 English 5. Edit the Channel Bank. An example is below. a. Bank1 (Free channel): Select the channels that will be accessible when a remote doesn’t have a card. b. Bank2 (Family Card - Green): Select the channels that will be accessible when a remote has a GREEN CARD. c. Bank3 (Adult Card - Red): Select the channels that will be accessible when a remote has a RED CARD. Channel Bank Editor Bank1 (4) Bank2 (6) Bank3 (36) Move Select/Deselect Return Information About SMOOVIE Remote Controls y If you select SMOOVIE as the SI vendor, you should also use SMOOVIE remotes in your facility. y Guests with remotes that do not have a card can only view channels from Bank 1. y Guests using the Numeric keys on the remote to change channels can only view channels from Bank 1. y Guests with remotes that have Green or Red cards must use the channel up/down keys to change channels. y Guests can only see channels from the Bank1 channel list In the Channel Guide or the Channel List. Smoovie Set Up Sequence Step All 1 ABC 2 CBS 3 FOX 4 NBC 5 CNN 6 CW 7 HBO 8 TNT Smoovie TV Setup (Air/ Cable ) Only Air or Cable used Only Air or Cable used If the TV starts with Hotel Plug&Play If Hotel Plug&Play already done 1 Do a complete P&P (including Air or Cable auto tune) Enter the Hotel menu 2 After P&P, the TV displays the Hotel menu Select the channel type - ATV or ADTV for Air - CATV or CDTV for cable 3 Select the channel type - ATV or ADTV for Air - CATV or CDTV for cable Select Smoovie TV in the Hotel menu 4 Select Smoovie TV in the Hotel menu Select Channel Setup 5 Select Channel Setup (Can be skipped) Select "Air" or "Cable" to auto tune 6 Select "Air" or "Cable" to auto tune. (Can be skipped,) Set up channels in the CH Bank Editor 7 Set up channels in the CH Bank Editor After power off & on, guests can use the TV 8 After power off & on, guests can use the TV 910 39 English Channel Editor The Channel Editor lets you edit the channels stored in the TV's memory. Using Channel Editor you can: – Change the channel numbers and names, and sort the channels in your desired channel number order. – Apply the video mute to channels you select. The video mute blanks out the video from a channel and outputs only the sound while displaying a speaker icon on the screen. The Channel Editor also lets you view information about each channel easily, without your having to display each channel directly. Hospitality Mode Standalone Security Mode SI Vendor OFF DRM Power On System Channel MyChannel Menu OSD Clock

Music Mode External Source Eco Solution Logo/Message Cloning REACH Solution Network Widget Solution Virtual Standby r Channel Editor

<Depending on model and region, some menu items may not exist.> General Steps for Using the Channel Editor in Stand-alone Mode Step Broad Outline 1 Run ‘Channel Auto Store’ in the Hotel Option Menu. 2 Enter ‘Channel Editor’ in the Hotel Option Menu. 3 On a piece of paper, compile a list of channels you want to have, arranged in the order you want. 4 Rearrange channels and edit channel names with the TOOLS Button based on the list you compiled. 5 Press the EXIT or RETURN Button to exit. <For a detailed explanation of how Channel Editor works, see pages 41 through 43.> 40 English The picture below shows a sample Channel Editor screen. Channel

All a 2 ----- (Cable) a 10 CW a 3 ----- (Cable) Air 10-1 CW DTV a 4 ----- (Cable) a 11 HBO

a 5 ----- (Cable) Air 11-1 HBO DTV a 6 ----- (Cable) a 12 NBC a 7 ABC Air 12-1 NBC DTV Air 7-1 ABC a 13 ----- (Cable) a 8 FOX a 14 CNN Air 8-1 FOX DTV Air 15 ----- (Cable) a 9 ----- (Cable) a 16 TNT a Delete b Select All } Video Mute On ` Information U Page E Select T Tools R Return y a Indicates an analog channel. y Channels without an a are digital channels. ✎ If Dynamic SI in the Hospitality Option Menu is On, Channel Editor will display no digital channels. You must set Dynamic SI to Off before you can edit digital channels in Channel Editor. y The guide at the bottom of the Channel Editor menu displays the remote buttons you need to press to apply Channel Editor functions. 1 Using the remote's up or down arrow key, highlight the channel that you want to edit. – To edit more than one channel, move the highlight to a channel, and then press the ENTERE key. A check will appear in the check box next to the channel. Repeat for each channel you want to edit. 2 To delete the channel or channels you selected from the channel list, press the red button on the remote. – To delete two or more channels simultaneously, select multiple channels in Step 1, and then press the red button on the remote. 3 Press the green button on the remote to select all channels. 4 To apply the video mute, press the yellow button on the remote. – To apply the video mute to two or more channels simultaneously, select multiple channels in Step 1, and then press the yellow button on the remote. 5 To view information about a channel, including video mute set up, press the INFO button on the remote. 6 Press the TOOLS button on the remote to rename a channel or change the channel number. Channel Editor Functions and Remote Button a Red (Delete): Deletes a channel from the channel list. b Green (Select All): Selects all channels at once. { Yellow (Deselect All): Deselects all channels at once. } Blue (Video Mute On/Off): You can set the Video Mute On/Off. U (Page): Moves to next or previous page. ` (Information): Display details of the selected channel. T (Tools): Displays the option menu. R (Return): Returns to the previous step or exits. 41 English When you press the TOOLS button, the following menu is available. Channel TOOLS All a 2 ----- (Cable) Edit Channel a 10 Number CW a 3 ----- (Cable) Rename Air Channel 10-1 CW DTV a 4 ----- (Cable) Information a 11 HBO a 5 ----- (Cable) Air 11-1 HBO DTV a 6 ----- (Cable) a 12 NBC a 7 ABC Air 12-1 NBC DTV Air 7-1 ABC a 13 ----- (Cable) a 8 FOX a 14 CNN Air 8-1 FOX DTV Air 15 ----- (Cable) a 9 ----- (Cable) a 16 TNT R Return a Delete b Select All } Video Mute On ` Information U Page E Select T Tools R Return y Edit Channel Number Use Edit Channel Number to change the channel number of a channel you select. To change a channel number, follow these steps: 1. Select a channel on the Channel Edit screen. 2. Press the TOOLS button on your remote. 3. Select Edit Channel Number in the Tools menu. 4. Use the up or down arrow keys to change the channel number. 5. Select OK when done, and then press the ENTERE button. ✎ When you change the channel number, the channel information is not updated automatically. Edit Channel Number Ok 4 ABC HD_Cancel U Adjust E Space R Return y Rename Channel Use Rename Channel to change the name of a channel you select. To change the name of a channel, follow these steps: 1. Select a channel on the Channel Edit screen. 2. Press the TOOLS button on your remote. 3. Select Rename Channel in the Tools menu. 4. Use the on-screen keyboard that appears to enter the new name for the channel. Use the arrow buttons on your remote to select a letter or number, and then press Enter. Repeat for each letter or number you want to select. 5. When finished, select Done on the bottom of the screen, and then press the ENTERE button. Rename Channel Enter new name for CH 4 (Max Length = 24) ABC HD_ a b c d e f 1 2 3 g h i j k l 4 5 6 m n o p q r 7 8 9 s t u v w x y z 0 A/a  Space ◄ ► a Delete { Space R Return y Information Use Information to view information about a channel you select. To view information about a channel, follow these steps: 1. Select a channel on the Channel Edit screen. 2. Press the TOOLS button on your remote. 3. Select Information in the Tools menu. 4. Select OK, and then press the ENTERE button to close the Information screen. Done Cancel Information OK 42 English The external sources of this TV are displayed in the last page of the Channel Editor menu as shown in the example below. In the example, there are two external sources connected to the TV, HDMI2 and AV. – You can assign a new analog channel to an external source by selecting the source on the last page, pressing the TOOLS button, selecting Edit Channel Number, and then using the up or down arrow button on the remote to select the channel number of the analog channel. – If you tune to a channel after assigning the channel to an external source, you can enter the external source without opening the TV source menu. Channel a 628 MLS Soccer a 629 CNN NEWS Alla 812 American Idol a 840 90210 a 841 LOST a 998 Euro Football a HDMI1 a HDMI2 a HDMI3 a AV b Select All U Page E Select T Tools R Return After assigning channel number 997 to the AV source. Channel a 628 MLS Soccer a 629 CNN NEWS All a 812 American Idol a 840 90210 a 841 LOST a 997 AV a Euro Football a HDMI1 a HDMI2/DVI a HDMI3 a Delete b Select All U Page E Select T Tools R Return 43 English 44 English Installing the Wall Mount Installing the wall mount kit You can mount the TV on the wall using a wall mount kit (sold separately). To install a wall-mount from another manufacturer, use the Holder-Ring. ✎ The Product shape may differ depending on the model. Installing the Wall Mount Kit The wall mount kit (sold separately) allows you to mount the TV on a wall. For detailed information on installing the wall mount, see the instructions provided with the wall mount. Contact a technician for assistance when installing the wall mount bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you select to install the TV on your own. Securing the TV to the Wall [ Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not hang on or destabilize the TV. Doing so may cause the TV to tip over, causing serious injuries or death. Follow all safety precautions provided in the Safety Flyer included with your TV. For added stability and safety, you can purchase and install the anti-fall device as described below. To Prevent the TV from Falling ✎ TV Holder Kits are sold separately. To purchase a TV Holder Kit, contact Samsung Customer Care. 1. Insert the screws into the wall brackets and firmly fasten them to the wall. Make sure the screws are firmly fixed to the wall. ✎ We strongly recommend you drive the screws into a stud. 2. Insert the screws into the wall brackets and firmly fasten the screws to the top VESA screw holes on theback of the TV. 3. Connect the brackets on the TV and the brackets on the wall with a strong string or cable, and then tie the string or cable tighrly to the brackets. ✎ Verify all connections are properly secured. Periodically check the connections for any sign of fatigue or failure. If you have any doubt about the security of your connections, contact a professional installer. ✎ Install the TV close to the wall so that it does not fall. ✎ Connect the string or cable so that the brackets on the wall are at the same height or lower than the brackets on the TV. Untie the string or cable before moving the TV. Wall Mount Kit Specifications (VESA) ✎ The wall mount kit is not supplied, but sold separately. Install your wall mount on a solid wall perpendicular to the floor. If you are attaching the wall mount to building materials other than plaster board, contact your nearest dealer. If installed on a ceiling or slanted wall, the TV may fall and cause severe personal injury. ✎ NOTE – Standard dimensions for wall mount kits are shown in the table below. – Samsung wall mount kits contain a detailed installation manual. All parts necessary for assembly are provided. – Do not use screws that do not comply with the VESA standard screw specifications. – Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw specifications. Screws that are too long may cause damage to the inside of the TV set. – For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ depending on the wall mount specifications. – Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents. – Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions. – Do not mount the TV at more than a 15 degree tilt. – Always have two people mount the TV onto a wall. Wall mount Adapter TVWall mount Adapter TV Product Family TV size in inches Wall mount bracket Wall mount bracket CC VESA screw hole specs (A * B) in millimeters Standard Screw C (mm) (Length* Quantity Pitch in mm) LED-TV 49 55400 X 400 43 ~ 45 M8 4 65 Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock. 45 English

46 English Anti-theft Kensington Lock The Kensington Lock is a device you can use to physically fix a TV to a location when you use it in a public place. The appearance and locking method may differ from the illustration at right, depending on the manufacturer. Refer to the manual provided with the Kensington Lock for additional information on proper use. The Kensington Lock is not supplied by Samsung. ✎ Please find the “K” icon on the rear of the TV. A Kensington slot is beside the “K” icon. 1 <Optional>

To lock the product, follow these steps: 1. Wrap the Kensington lock cable around a large, stationary object such as desk or chair. 2. Slide the end of the cable with the lock attached through the looped end of the Kensington lock cable. 3. Insert the locking device into the Kensington slot on the product 1. 4. Lock the lock. ✎ These are general instructions. For exact instructions, see the User manual supplied with the locking device. ✎ The locking device has to be purchased separately. ✎ The location of the Kensington slot may be different depending on the TV model. Specifications Environmental Considerations Operating Temperature Operating Humidity Storage Temperature Storage Humidity 50°F to 104°F (10°C to 40°C) 10% to 80%, non-condensing -4°F to 113°F (-20°C to 45°C) 5% to 95%, non-condensing Model Name HG49NE890U HG55NE890U Display Resolution 3840 x 2160 Stand Swivel (Left / Right) 0° Screen Size (Diagonal) 49” Class (48.5” measured diagonally) 55” Class (54.6” measured diagonally) Sound (Output) 20 W Dimensions (W x H x D) Body With stand 43.3 x 25.1 x 2.2 inches (1099.4 x 638.7 x 55.3 mm) 43.3 x 27.9 x 13.2 inches (1099.4 x 709.0 x 334.1 mm) 48.6 x 28.2 x 2.2 inches (1235.2 x 715.1 x 54.7 mm) 48.6 x 31 x 13.2 inches (1235.2 x 786.7 x 334.1 mm) Weight Without Stand With Stand 30.9 lbs (14.0 kg) 35.5 lbs (16.1 kg) 37.3 lbs (16.9 kg) 42.1 lbs (19.1 kg) Model Name HG65NE890U Display Resolution 3840 x 2160 Stand Swivel (Left / Right) 0° Screen Size (Diagonal) 65” Class (64.5” measured diagonally) Sound (Output) 20 W Dimensions (W x H x D) Body With stand 57.3 x 33.1 x 2.1 inches (1456.1 x 840.4 x 54.4 mm) 57.3 x 36.4 x 14.9 inches (1456.1 x 924.3 x 378.7 mm) Weight Without Stand With Stand 51.1 lbs (23.2 kg) 58.9 lbs (26.7 kg) ✎ Design and specifications are subject to change without prior notice. ✎ This device is a Class B digital apparatus. ✎ For power supply and power consumption information, refer to the label attached to the product. 47 English 48 English Supported Resolutions for UHD Input Signals y Resolution: 3840 x 2160p, 4096 x 2160p ✎ An HDMI connection with HDMI UHD Color set to Off supports up to UHD 50P/60P 4:2:0 input signals, while an HDMI connection with HDMI UHD Color set to On supports up to UHD 50P/60P 4:4:4 and 4:2:2 input signals. If HDMI UHD Color is set to Off Frame rate (fps) RGB YCbCr 4:4:4 YCbCr 4:2:2 YCbCr 4:2:0 24 / 25 / 30 O O O - 50 / 60 - - - O If HDMI UHD Color is set to On Frame rate (fps) RGB YCbCr 4:4:4 YCbCr 4:2:2 YCbCr 4:2:0 24 / 25 / 30 O O O - 50 / 60 O O O O Display Resolution When you use your TV as a computer monitor, you can also select one of the standard resolutions listed in the Resolution column. The TV will automatically adjust to the resolution you choose.

Mode Resolution Display format Horizontal frequency (KHz) Vertical frequency (Hz) Vertical frequency (Hz) Clock frequency (MHz) Clock frequency (MHz) Clock frequency (MHz) Polarity (horizontal / vertical) Polarity (horizontal / vertical) Polarity (horizontal / vertical) Polarity (horizontal / vertical)

IBM 720 x 400 70 Hz 31.469 70.087 28.322 -/+

MAC 640 x 480 832 x 624 1152 x 870 67 Hz 75 Hz 75 Hz 67 Hz 75 Hz 75 Hz 35.000 49.726 68.681 35.000 49.726 68.681 35.000 49.726 68.681 66.667 74.551 75.062 66.667 74.551 75.062 66.667 74.551 75.062 66.667 74.551 75.062 30.240 57.284 100.000 30.240 57.284 100.000 30.240 57.284 100.000 30.240 57.284 100.000 30.240 57.284 100.000 -/- -/- -/- -/- -/- -/- -/- -/- -/- -/- -/- -/- -/- -/- -/- -/- -/- -/- VESA DMT 640 x 480 640 x 480 640 x 480 800 x 600 800 x 600 800 x 600 1024 x 768 1024 x 768 1024 x 768 1152 x 864 1280 x 720 1280 x 800 1280 x 1024 1280 x 1024 1366 x 768 1440 x 900 1600 x 900RB 1680 x 1050 1920 x 1080 1920 x 1200 60 Hz 72 Hz 75 Hz 60 Hz 72 Hz 75 Hz 60 Hz 70 Hz 75 Hz 75 Hz 60 Hz 60 Hz 60 Hz 75 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 72 Hz 75 Hz 60 Hz 72 Hz 75 Hz 60 Hz 70 Hz 75 Hz 75 Hz 60 Hz 60 Hz 60 Hz 75 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 31.469 37.861 37.500 37.879 48.077 46.875 48.363 56.476 60.023 67.500 45.000 49.702 63.981 79.976 47.712 55.935 60.000 65.290 67.500 74.556 31.469 37.861 37.500 37.879 48.077 46.875 48.363 56.476 60.023 67.500 45.000 49.702 63.981 79.976 47.712 55.935 60.000 65.290 67.500 74.556 31.469 37.861 37.500 37.879 48.077 46.875 48.363 56.476 60.023 67.500 45.000 49.702 63.981 79.976 47.712 55.935 60.000 65.290 67.500 74.556 59.940 72.809 75.000 60.317 72.188 75.000 60.004 70.069 75.029 75.000 60.000 59.810 60.020 75.025 59.790 59.887 60.000 59.954 60.000 59.885 59.940 72.809 75.000 60.317 72.188 75.000 60.004 70.069 75.029 75.000 60.000 59.810 60.020 75.025 59.790 59.887 60.000 59.954 60.000 59.885 59.940 72.809 75.000 60.317 72.188 75.000 60.004 70.069 75.029 75.000 60.000 59.810 60.020 75.025 59.790 59.887 60.000 59.954 60.000 59.885 59.940 72.809 75.000 60.317 72.188 75.000 60.004 70.069 75.029 75.000 60.000 59.810 60.020 75.025 59.790 59.887 60.000 59.954 60.000 59.885 25.175 31.500 31.500 40.000 50.000 49.500 65.000 75.000 78.750 108.000 74.250 83.500 108.000 135.000 85.500 106.500 108.000 146.250 148.500 193.250 25.175 31.500 31.500 40.000 50.000 49.500 65.000 75.000 78.750 108.000 74.250 83.500 108.000 135.000 85.500 106.500 108.000 146.250 148.500 193.250 25.175 31.500 31.500 40.000 50.000 49.500 65.000 75.000 78.750 108.000 74.250 83.500 108.000 135.000 85.500 106.500 108.000 146.250 148.500 193.250 25.175 31.500 31.500 40.000 50.000 49.500 65.000 75.000 78.750 108.000 74.250 83.500 108.000 135.000 85.500 106.500 108.000 146.250 148.500 193.250 25.175 31.500 31.500 40.000 50.000 49.500 65.000 75.000 78.750 108.000 74.250 83.500 108.000 135.000 85.500 106.500 108.000 146.250 148.500 193.250 - / - - / - - / - + / + + / + + / + - / - - / - + / + + / + + / + - / + + / + + / + + / + - / + + / + - / + + / + - / + - / - - / - - / - + / + + / + + / + - / - - / - + / + + / + + / + - / + + / + + / + + / + - / + + / + - / + + / + - / + - / - - / - - / - + / + + / + + / + - / - - / - + / + + / + + / + - / + + / + + / + + / + - / + + / + - / + + / + - / + - / - - / - - / - + / + + / + + / + - / - - / - + / + + / + + / + - / + + / + + / + + / + - / + + / + - / + + / + - / + - / - - / - - / - + / + + / + + / + - / - - / - + / + + / + + / + - / + + / + + / + + / + - / + + / + - / + + / + - / + - / - - / - - / - + / + + / + + / + - / - - / - + / + + / + + / + - / + + / + + / + + / + - / + + / + - / + + / + - / +

Clock Mode Resolution Display Horizontal format Vertical frequency (MHz) frequency frequency (KHz) (Hz) Polarity (horizontal / vertical) CEA-861 720(1440) x 576i 720(1440) x 480i 720 x 576 720 x 480 1280 x 720 1280 x 720 1920 x 1080i 1920 x 1080i 1920 x 1080 1920 x 1080 1920 x 1080 1920 x 1080 1920 x 1080 3840 x 2160 3840 x 2160 3840 x 2160 3840 x 2160 3840 x 2160 4096 x 2160 4096 x 2160 4096 x 2160 4096 x 2160 4096 x 2160 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 50 Hz 60 Hz 24 Hz 25 Hz 30 Hz 50 Hz 60 Hz 24 Hz 25 Hz 30 Hz 50 Hz 60 Hz 24 Hz 25 Hz 30 Hz 50 Hz 60 Hz 15.625 15.734 31.250 31.469 37.500 45.000 28.125 33.750 27.000 28.125 33.750 56.250 67.500 54.000 56.250 67.500 112.500 135.000 54.000 56.250 67.500 112.500 135.000 50.000 59.940 50.000 59.940 50.000 60.000 50.000 60.000 24.000 25.000 30.000 50.000 60.000 24.000 25.000 30.000 50.000 60.000 24.000 25.000 30.000 50.000 60.000 27.000 27.000 27.000 27.000 74.250 74.250 74.250 74.250 74.250 74.250 74.250 148.500 148.500 297.000 297.000 297.000 594.000 594.000 297.000 297.000 297.000 594.000 594.000 - / - - / - - / - - / - + / + + / + + / + + / + + / + + / + + / + + / + + / + + / + + / + + / + + / + + / + + / + + / + + / + + / + + / + HDMI 3840 x 2160 3840 x 2160 3840 x 2160 4096 x 2160 30 Hz 25 Hz 24 Hz 24 Hz 67.500 56.250 54.000 54.000 30.000 25.000 24.000 24.000 297.000 297.000 297.000 297.000 + / + + / + + / + + / + ✎ NOTE – The interlaced mode is not supported. – The set might operate abnormally if you select a non-standard video format. – Separate and Composite modes are supported. SOG (Sync On Green) is not supported. 49 English

50 English Dimensions Front view / Side view (Unit: inches) ◆ HG49NE890U ◆ HG55NE890U 43.3 25.1 27.9 2.213.2 48.6 2.242.4 23.9 28.2 31.0 37.3 13.2 47.8 26.9 37.3 ◆ HG65NE890U 57.3 33.1 36.4 2.156.4 31.8 41.8 14.9

Jack panel detail / Rear view ✎ Detailed dimensions can be checked at Displaysolutions.samsung.com. Base Stand detail ◆ HG49NE890U / HG55NE890U (Unit: inches) 9.937.3 13.2 13.2 ◆ HG65NE890U (Unit: inches) 14.9 41.8 14.9 14.9 ✎ NOTE All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing installation of your TV. Not responsible for typographical or printed errors. 51 English 52 EnglishImportant Warranty Information Regarding Television Format Viewing ✎ See the warranty card for more information on warranty terms. Wide screen format LED Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark sidebars on nonexpanded standard format television video and programming, should be limited to no more than 5% of the total television viewing per week. Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines can cause uneven aging of LED Displays that leave subtle, but permanent burned-in ghost images in the LED picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On LED models that offer picture sizing features, use these controls to view different formats as a full screen picture. Be careful in the selection and duration of television formats used for viewing. Uneven LED aging as a result of format selection and use, as well as burned-in images, are not covered by your Samsung limited warranty. y SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung Electronics (SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide Warranty Repair Service in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products purchased in the United States, for the warranty period originally specified, and to the Original Purchaser only. The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this Statement, the Original Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center. Transportation to and from the Service Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing defects in material or workmanship, and only those encountered in normal use of the product. Excluded, but not limited to, are any originally specified provisions for, in-home or on-site services, minimum or maximum repair times, exchanges or replacements, accessories, options, upgrades, or consumables. For the location of a SAMSUNG Authorized Service Center, please call toll-free: – In the United States: 1-866-sam4biz – In Canada: 1-800-213-8513 License Manufactured under licence from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. DTS, the Symbol, DTS in combination with the Symbol, DTS Premium Sound|5.1, DTS Digital Surround, DTS Express, and DTS Neo2:5 are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. c DTS, Inc. All Rights Reserved. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, DTS in combination with the Symbol, and DTS Studio Sound are registered trademarks or trademarks of DTS, Inc. in the United States and/or other countries. c DTS, Inc. All Rights Reserved. DivX Certified® to play DivX® video up to HD 1080p, including premium content. DivX®, DivX Certified® and associated logos are trademarks of DivX, LLC and are used under license. This DivX Certified® device has passed rigorous testing to ensure it plays DivX® video. To play purchased DivX movies, first register your device at vod.divx.com. Find your registration code in the DivX VOD section of your device setup menu. Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 8,656,183; 8,731,369; RE45,052. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Open Source License Notice Open Source used in this product can be found on the following webpage. (http://opensource.samsung.com) Open Source License Notice is written only English. 53 English Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Samsung Hospitality Hotline 1-800-sam4biz (US) 1-800-726-7864 (CANADA) 1-800-726-7864 (MEXICO) Web site: http://www.samsung.com/us/business © 2016 Samsung Electronics America, Inc NE890U-NA-Eng-03


FREE ENGLISH PDF

OPERATING INSTRUCTIONS

USER GUIDE - USER MANUAL

OWNER GUIDE - OWNER MANUAL

REFERENCE GUIDE - REFERENCE MANUAL

INSTRUCTION GUIDE - INSTRUCTION MANUAL

Leave a Reply